The next patch will refactor the hub port code to rip out the recursive
call to hub_port_reset on a failed hot reset.  In preparation for that,
make sure all code paths can deal with being called with a NULL udev.
The usb_device will not be valid if warm reset was issued because a port
transitioned to the Inactive or Compliance Mode on a device connect.

This patch should have no effect on current behavior.

Signed-off-by: Sarah Sharp <sarah.a.sh...@linux.intel.com>
---
 drivers/usb/core/hub.c |   21 +++++++++++++--------
 1 files changed, 13 insertions(+), 8 deletions(-)

diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index c8d32b4..d8de712 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -2588,6 +2588,9 @@ static int hub_port_wait_reset(struct usb_hub *hub, int 
port1,
                         */
                        if (!(portstatus & USB_PORT_STAT_RESET) &&
                            (portstatus & USB_PORT_STAT_ENABLE)) {
+                               if (!udev)
+                                       return 0;
+
                                if (hub_is_wusb(hub))
                                        udev->speed = USB_SPEED_WIRELESS;
                                else if (hub_is_superspeed(hub->hdev))
@@ -2634,13 +2637,15 @@ static void hub_port_finish_reset(struct usb_hub *hub, 
int port1,
                        struct usb_hcd *hcd;
                        /* TRSTRCY = 10 ms; plus some extra */
                        msleep(10 + 40);
-                       update_devnum(udev, 0);
-                       hcd = bus_to_hcd(udev->bus);
-                       /* The xHC may think the device is already reset,
-                        * so ignore the status.
-                        */
-                       if (hcd->driver->reset_device)
-                               hcd->driver->reset_device(hcd, udev);
+                       if (udev) {
+                               update_devnum(udev, 0);
+                               hcd = bus_to_hcd(udev->bus);
+                               /* The xHC may think the device is already
+                                * reset, so ignore the status.
+                                */
+                               if (hcd->driver->reset_device)
+                                       hcd->driver->reset_device(hcd, udev);
+                       }
                }
                /* FALL THROUGH */
        case -ENOTCONN:
@@ -2654,7 +2659,7 @@ static void hub_port_finish_reset(struct usb_hub *hub, 
int port1,
                        clear_port_feature(hub->hdev, port1,
                                        USB_PORT_FEAT_C_PORT_LINK_STATE);
                }
-               if (!warm)
+               if (!warm && udev)
                        usb_set_device_state(udev, *status
                                        ? USB_STATE_NOTATTACHED
                                        : USB_STATE_DEFAULT);
-- 
1.7.9

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to