On 04/12/12 01:09, the mail apparently from Alan Stern included:
On Mon, 3 Dec 2012, Andy Green wrote:
Unless someone NAKs it for sure already (if you're already sure you're
going to, please do so to avoid wasting time), I'll issue a try#2 of my
code later which demonstrates what I mean. At least I guess it's useful
for comparative purposes.
Before you go writing a whole lot more code, we should discuss the
basics a bit more clearly. There are several unsettled issues here:
1. Should the LAN95xx stuff be associated with the ehci-omap.0's
driver or with the hub port? The port would be more flexible,
offering the ability to turn the power off and on while the
system is running without affecting anything else. But the
port code is currently in flux, which could cause this new
addition to be delayed.
I think associating ULPI PHY reset and SMSC power and reset with the hub
port power state is good. Then, you could have the driver in a device
with multiple onboard USB devices, and individually control whether
they're eating power or not. In the asset case, you'd associate mux
assets with ehci-omap.0.
Yesterday I studied the hub port code and have a couple of patches, one
normalizes the hub port device to have a stub driver.
The other then puts hub port power state signalling into runtime_pm
handlers in the hub port device. Until now, actually there's no code in
hub.c to switch off a port.
Assuming that's not insane, what should the user interface to disable a
port power look like, something in sysfs? Until now it doesn't seem to
exist.
(On the other hand, since the LAN95xx is the only thing
connected to the root hub, it could be powered off and on by
unbinding the ehci-omap.0 device from its driver and rebinding
it.)
We shouldn't get to tied up with Panda case, this will be there for all
cases like PCs etc. It should work well if there are multiple ports
with onboard assets.
2. If we do choose the port, do we want to identify it by matching
against a device name string or by matching a sequence of port
numbers (in this case, a length-1 sequence)? The port numbers
are fixed by the board design, whereas the device name strings
might get changed in the future. On the other hand, the port
numbers apply only to USB whereas device names can be used by
any subsystem.
USB device names contain the port information. The matching scheme I
have currently just uses the right-hand side of the path information and
nothing that is not defined by the USB subsystem. It uses a
platform_device ancestor to restrict matches to descendants of the right
host controller. So unlike try#1 the names are as stable as the
subsystem code alone, however stable that is, it's not exposed to
changes from anywhere else. As you mention it's then workable on any
dynamically probed bus.
3. Should the matching mechanism go into the device core or into
the USB port code? (This is related to the previous question.)
Currently I am experimenting with having the asset pointer in struct
device, but migrating the events into runtime_resume and
runtime_suspend. If it works out that has advantages that assets follow
not just the logical device existence but the pm state of the device
closely.
It also allows leveraging assets directly to the hub port runtime_pm
state, so they follow enable state of the port without any additional code.
4. Should this be implemented simply as a regulator (or a pair of
regulators)? Or should it be generalized to some sort of PM
domain thing? The generic_pm_domain structure defined in
include/linux/pm_domain.h seems like overkill, but maybe it's
the most appropriate thing to use.
They should be regulators for that I think. But it's only part the
problem since clocks and mux are also going to be commonly associated
with device power state, and indeed are in Panda case.
I realize restricting the scope is desirable to get something done, but
I'm not sure supporting regulators only is enough of the job.
Until we decide on the answers to these questions, there's no point
writing detailed patches.
I agree, however I can't get insight into and confidence about what to
do without studying and meddling with the code. Some throwaway code is
probably a reasonable price.
-Andy
--
Andy Green | TI Landing Team Leader
Linaro.org │ Open source software for ARM SoCs | Follow Linaro
http://facebook.com/pages/Linaro/155974581091106 -
http://twitter.com/#!/linaroorg - http://linaro.org/linaro-blog
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
