[PATCH v3 2/3] usb: chipidea: imx: Warn if oc polarity isn't specified

[Uwe Kleine-König]

The polarity of the over current detection pin isn't configured on i.MX6/7
if it's unspecified in the device tree. So the actual configuration depends
on bootloader behavior which is bad.

So encourage users to fix their device tree by issuing a warning in this
case.

Signed-off-by: Uwe Kleine-König <u.kleine-koe...@pengutronix.de>
---
 drivers/usb/chipidea/ci_hdrc_imx.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c 
b/drivers/usb/chipidea/ci_hdrc_imx.c
index 18b0ca87799c..1e7182272fb5 100644
--- a/drivers/usb/chipidea/ci_hdrc_imx.c
+++ b/drivers/usb/chipidea/ci_hdrc_imx.c
@@ -144,6 +144,8 @@ static struct imx_usbmisc_data 
*usbmisc_get_init_data(struct device *dev)
        } else if (of_find_property(np, "over-current-active-low", NULL)) {
                data->oc_pol_active_low = 1;
                data->oc_pol_configured = 1;
+       } else {
+               dev_warn(dev, "No over current polarity defined\n");
        }
 
        if (of_find_property(np, "external-vbus-divider", NULL))
-- 
2.19.2