Update DWC3 hardware modules to Exynos5433 specific variant: change compatible name and add all required clocks (both to the glue node and DWC3 core node).
Signed-off-by: Marek Szyprowski <[email protected]> --- arch/arm64/boot/dts/exynos/exynos5433.dtsi | 24 ++++++++++++++++------ 1 file changed, 18 insertions(+), 6 deletions(-) diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi index 162653b538bc..77297d66642c 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi @@ -1608,10 +1608,12 @@ }; usbdrd30: usbdrd { - compatible = "samsung,exynos5250-dwusb3"; + compatible = "samsung,exynos5433-dwusb3"; clocks = <&cmu_fsys CLK_ACLK_USBDRD30>, - <&cmu_fsys CLK_SCLK_USBDRD30>; - clock-names = "usbdrd30", "usbdrd30_susp_clk"; + <&cmu_fsys CLK_SCLK_USBDRD30>, + <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK>, + <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK>; + clock-names = "aclk", "susp_clk", "phyclk", "pipe_pclk"; #address-cells = <1>; #size-cells = <1>; ranges; @@ -1619,6 +1621,10 @@ usbdrd_dwc3: dwc3@15400000 { compatible = "snps,dwc3"; + clocks = <&cmu_fsys CLK_SCLK_USBDRD30>, + <&cmu_fsys CLK_ACLK_USBDRD30>, + <&cmu_fsys CLK_SCLK_USBDRD30>; + clock-names = "ref", "bus_early", "suspend"; reg = <0x15400000 0x10000>; interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>; phys = <&usbdrd30_phy 0>, <&usbdrd30_phy 1>; @@ -1655,10 +1661,12 @@ }; usbhost30: usbhost { - compatible = "samsung,exynos5250-dwusb3"; + compatible = "samsung,exynos5433-dwusb3"; clocks = <&cmu_fsys CLK_ACLK_USBHOST30>, - <&cmu_fsys CLK_SCLK_USBHOST30>; - clock-names = "usbdrd30", "usbdrd30_susp_clk"; + <&cmu_fsys CLK_SCLK_USBHOST30>, + <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK>, + <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK>; + clock-names = "aclk", "susp_clk", "phyclk", "pipe_pclk"; #address-cells = <1>; #size-cells = <1>; ranges; @@ -1666,6 +1674,10 @@ usbhost_dwc3: dwc3@15a00000 { compatible = "snps,dwc3"; + clocks = <&cmu_fsys CLK_SCLK_USBHOST30>, + <&cmu_fsys CLK_ACLK_USBHOST30>, + <&cmu_fsys CLK_SCLK_USBHOST30>; + clock-names = "ref", "bus_early", "suspend"; reg = <0x15a00000 0x10000>; interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>; phys = <&usbhost30_phy 0>, <&usbhost30_phy 1>; -- 2.17.1
