Hi Thinh,
On Fri, Aug 10, 2018 at 09:36:30PM +0000, Thinh Nguyen wrote:
> Hi Bin,
>
> On 8/10/2018 12:05 PM, Bin Liu wrote:
> > Hi Felipe,
> >
> > I noticed a regression on g_audio (uac2) with dwc3 udc on v4.14:
> >
> > - nosound in playback
> > - playback can only play once, the following error happens from the 2nd
> > playback
> >
> > aplay: set_params:1361: Unable to install hw params:
> >
> > A manual bisect tells the two issues are seperate and the regression
> > happens in v4.11-rc2 with the following two patches.
> >
> > 40d829fb2ec63 ("usb: dwc3: gadget: Correct ISOC DATA PIDs for short
> > packets")
> >
> > which cases the first no-sound issue.
> >
> > ep->mult is already 1 from g_audio, so mult-- leads to incorrect value.
> > The following change solves it.
>
> I believe v4.14.40 is missing this patch regarding that issue:
> ec5bb87e4e2a ("usb: dwc3: gadget: Fix PCM1 for ISOC EP with ep->mult
> less than 3")
>
> >
> > diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
> > index f92e2f2c7fbe..758cc258895c 100644
> > --- a/drivers/usb/dwc3/gadget.c
> > +++ b/drivers/usb/dwc3/gadget.c
> > @@ -930,10 +930,10 @@ static void __dwc3_prepare_one_trb(struct dwc3_ep
> > *dep, struct dwc3_trb *trb,
> > unsigned int mult = ep->mult - 1;
> > unsigned int maxp =
> > usb_endpoint_maxp(ep->desc);
> >
> > - if (length <= (2 * maxp))
> > + if (mult && length <= (2 * maxp))
> > mult--;
> >
> > - if (length <= maxp)
> > + if (mult && length <= maxp)
> > mult--;
> >
> > trb->size |= DWC3_TRB_SIZE_PCM1(mult);
> >
> > cf3113d893d4 ("usb: dwc3: gadget: properly increment dequeue pointer on
> > ep_dequeue")
> >
> > which causes the multiple playback failure. The following hack covers it.
> >
> > diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
> > index f92e2f2c7fbe..758cc258895c 100644
> > --- a/drivers/usb/dwc3/gadget.c
> > +++ b/drivers/usb/dwc3/gadget.c
> > @@ -1411,7 +1411,7 @@ static int dwc3_gadget_ep_dequeue(struct usb_ep *ep,
> > if (r == req) {
> > /* wait until it is processed */
> > dwc3_stop_active_transfer(dwc, dep->number, true);
> > -
> > +#if 0
> > /*
> > * If request was already started, this means we
> > had to
> > * stop the transfer. With that we also need to
> > ignore
> > @@ -1473,6 +1473,7 @@ static int dwc3_gadget_ep_dequeue(struct usb_ep *ep,
> > dwc3_ep_inc_deq(dep);
> > }
> > }
> > +#endif
> > goto out1;
> > }
> > dev_err(dwc->dev, "request %pK was not queued to %s\n",
> >
> > With the two changes above, g_audio works fine with v4.14.40, but not with
> > v4.18-rc7, in which the console is flooded with following message.
> >
> > u_audio_iso_complete: iso_complete status(-18) 0/256
> >
>
> Pierre Le Magourou attempted to fix the second issue with this patch
> (though the patch may need rework):
> https://patchwork.kernel.org/patch/10509639/
>
> You can try it out. It works fine when I tested it on HAPS platform
> (using Felipe's next branch).
Thanks for the hints. With the two patches you pointed, g_audio works
fine on v4.14.40.
Regards,
-Bin.
