On Sat, Nov 17, 2012 at 05:19:50PM +0800, Lan Tianyu wrote:
> This patch is to set xhci root hub's DeviceRemovable according to usb port's
> connect type which currently comes from ACPI information rather than xhci
> PORTSC
> register due to Windows prefers to ACPI information. If ACPI information was
> different with PORTSC, there would be a warning.
This looks fine. This patch seems to be dependent on the last one, so
Greg will have to take both. I'm happy to create a pull request if
necessary, once Alan acks the EHCI and USB khubd changes.
> Signed-off-by: Lan Tianyu <tianyu....@intel.com>
Signed-off-by: Sarah Sharp <sarah.a.sh...@linux.intel.com>
> ---
> drivers/usb/host/xhci-hub.c | 24 ++++++++++++++++++++++--
> 1 file changed, 22 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
> index a686cf4..36c07aa 100644
> --- a/drivers/usb/host/xhci-hub.c
> +++ b/drivers/usb/host/xhci-hub.c
> @@ -93,15 +93,25 @@ static void xhci_usb2_hub_descriptor(struct usb_hcd *hcd,
> struct xhci_hcd *xhci,
> */
> memset(port_removable, 0, sizeof(port_removable));
> for (i = 0; i < ports; i++) {
> + struct usb_device *hdev = hcd->self.root_hub;
> + enum usb_port_connect_type connect_type
> + = usb_get_hub_port_connect_type(hdev, i + 1);
> +
> portsc = xhci_readl(xhci, xhci->usb2_ports[i]);
> +
> /* If a device is removable, PORTSC reports a 0, same as in the
> * hub descriptor DeviceRemovable bits.
> */
> - if (portsc & PORT_DEV_REMOVE)
> + if (connect_type == USB_PORT_CONNECT_TYPE_HARD_WIRED) {
> + if (!(portsc & PORT_DEV_REMOVE))
> + xhci_warn(xhci, "usb2.0 port%d's connect type
> from ACPI is different with PORTSC register. ACPI returns hard-wired.\n",
> + i + 1);
> +
> /* This math is hairy because bit 0 of DeviceRemovable
> * is reserved, and bit 1 is for port 1, etc.
> */
> port_removable[(i + 1) / 8] |= 1 << ((i + 1) % 8);
> + }
> }
>
> /* ch11.h defines a hub descriptor that has room for USB_MAXCHILDREN
> @@ -147,9 +157,19 @@ static void xhci_usb3_hub_descriptor(struct usb_hcd
> *hcd, struct xhci_hcd *xhci,
> port_removable = 0;
> /* bit 0 is reserved, bit 1 is for port 1, etc. */
> for (i = 0; i < ports; i++) {
> + struct usb_device *hdev = hcd->self.root_hub;
> + enum usb_port_connect_type connect_type
> + = usb_get_hub_port_connect_type(hdev, i + 1);
> +
> portsc = xhci_readl(xhci, xhci->usb3_ports[i]);
> - if (portsc & PORT_DEV_REMOVE)
> +
> + if (connect_type == USB_PORT_CONNECT_TYPE_HARD_WIRED) {
> + if (!(portsc & PORT_DEV_REMOVE))
> + xhci_warn(xhci, "usb3.0 port%d's connect type
> from ACPI is different with PORTSC register. ACPI returns hard-wired.\n",
> + i + 1);
> +
> port_removable |= 1 << (i + 1);
> + }
> }
>
> desc->u.ss.DeviceRemovable = cpu_to_le16(port_removable);
> --
> 1.7.9.5
>
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
