On Tue, Nov 27, 2012 at 5:07 AM, Alan Stern <st...@rowland.harvard.edu> wrote: > On Mon, 26 Nov 2012, Greg KH wrote: > >> Ah, here's the root of your problem, right? You need a way for your >> hardware to tell the kernel that you have a regulator attached to a >> specific device? Using the device path and hard-coding it into the >> kernel is not the proper way to solve this, sorry. Use some other >> unique way to describe the hardware, surely the hardware designers >> couldn't have been that foolish not to provide this [1]? > > As far as I know, the kernel has no other way to describe devices. > > What about using partial matches? In this example, instead of doing a > wildcard match against > > /platform/usbhs_omap/ehci-omap.0/usb*
IMO, all matches mean the devices are inside the ehci-omap bus, so the direct/simple way is to enable/disable the regulators in the probe() and remove() of ehci-omap controller driver. On the other side, both the two LAN95xx USB devices(hub + ethernet) are simple self-powered device. Just like other self-powered devices, the power should be provided from external world, instead of hub driver itself. And it is doable to power on the devices before creating the specific ehci-omap usb bus inside ehci-omap driver. Thanks, -- Ming Lei -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
