Hi Marc, On Wed, Nov 07, 2012 at 09:29:05PM +0100, Marc Kleine-Budde wrote: > On 10/02/2012 09:16 AM, Olivier Sobrie wrote: > > This driver provides support for several Kvaser CAN/USB devices. > > Such kind of devices supports up to three CAN network interfaces. > > > > It has been tested with a Kvaser USB Leaf Light (one network interface) > > connected to a pch_can interface. > > The firmware version of the Kvaser device was 2.5.205. > > > > List of Kvaser devices supported by the driver: > > - Kvaser Leaf Light > > - Kvaser Leaf Professional HS > > - Kvaser Leaf SemiPro HS > > - Kvaser Leaf Professional LS > > - Kvaser Leaf Professional SWC > > - Kvaser Leaf Professional LIN > > - Kvaser Leaf SemiPro LS > > - Kvaser Leaf SemiPro SWC > > - Kvaser Memorator II HS/HS > > - Kvaser USBcan Professional HS/HS > > - Kvaser Leaf Light GI > > - Kvaser Leaf Professional HS (OBD-II connector) > > - Kvaser Memorator Professional HS/LS > > - Kvaser Leaf Light "China" > > - Kvaser BlackBird SemiPro > > - Kvaser USBcan R > > > > Signed-off-by: Daniel Berglund <d...@kvaser.com> > > Signed-off-by: Olivier Sobrie <oliv...@sobrie.be> > > Sorry I forgot about the review. > Looks quite good, some comments inline.
Sorry for the late reply but I was in holiday during the last 3 weeks :-) See my comments below. > > > --- > > Hi, > > > > This new patch fixes the errors pointed out by Marc and Wolfgang. > > > > Changes since v4: > > - add missing usb_free_urb() > > - put error message in a separate function > > - handle return code of kvaser_usb_init_one() in probe function > > > > Olivier > > > > drivers/net/can/usb/Kconfig | 29 + > > drivers/net/can/usb/Makefile | 1 + > > drivers/net/can/usb/kvaser_usb.c | 1596 > > ++++++++++++++++++++++++++++++++++++++ > > 3 files changed, 1626 insertions(+) > > create mode 100644 drivers/net/can/usb/kvaser_usb.c > > > > diff --git a/drivers/net/can/usb/Kconfig b/drivers/net/can/usb/Kconfig > > index 0a68768..a4e4bee 100644 > > --- a/drivers/net/can/usb/Kconfig > > +++ b/drivers/net/can/usb/Kconfig > > @@ -13,6 +13,35 @@ config CAN_ESD_USB2 > > This driver supports the CAN-USB/2 interface > > from esd electronic system design gmbh (http://www.esd.eu). > > > > +config CAN_KVASER_USB > > + tristate "Kvaser CAN/USB interface" > > + ---help--- > > + This driver adds support for Kvaser CAN/USB devices like Kvaser > > + Leaf Light. > > + > > + The driver gives support for the following devices: > > + - Kvaser Leaf Light > > + - Kvaser Leaf Professional HS > > + - Kvaser Leaf SemiPro HS > > + - Kvaser Leaf Professional LS > > + - Kvaser Leaf Professional SWC > > + - Kvaser Leaf Professional LIN > > + - Kvaser Leaf SemiPro LS > > + - Kvaser Leaf SemiPro SWC > > + - Kvaser Memorator II HS/HS > > + - Kvaser USBcan Professional HS/HS > > + - Kvaser Leaf Light GI > > + - Kvaser Leaf Professional HS (OBD-II connector) > > + - Kvaser Memorator Professional HS/LS > > + - Kvaser Leaf Light "China" > > + - Kvaser BlackBird SemiPro > > + - Kvaser USBcan R > > + > > + If unsure, say N. > > + > > + To compile this driver as a module, choose M here: the > > + module will be called kvaser_usb. > > + > > config CAN_PEAK_USB > > tristate "PEAK PCAN-USB/USB Pro interfaces" > > ---help--- > > diff --git a/drivers/net/can/usb/Makefile b/drivers/net/can/usb/Makefile > > index da6d1d3..80a2ee4 100644 > > --- a/drivers/net/can/usb/Makefile > > +++ b/drivers/net/can/usb/Makefile > > @@ -4,6 +4,7 @@ > > > > obj-$(CONFIG_CAN_EMS_USB) += ems_usb.o > > obj-$(CONFIG_CAN_ESD_USB2) += esd_usb2.o > > +obj-$(CONFIG_CAN_KVASER_USB) += kvaser_usb.o > > obj-$(CONFIG_CAN_PEAK_USB) += peak_usb/ > > > > ccflags-$(CONFIG_CAN_DEBUG_DEVICES) := -DDEBUG > > diff --git a/drivers/net/can/usb/kvaser_usb.c > > b/drivers/net/can/usb/kvaser_usb.c > > new file mode 100644 > > index 0000000..bd48807 > > --- /dev/null > > +++ b/drivers/net/can/usb/kvaser_usb.c > > @@ -0,0 +1,1596 @@ > > +/* > > + * This program is free software; you can redistribute it and/or > > + * modify it under the terms of the GNU General Public License as > > + * published by the Free Software Foundation version 2. > > + * > > + * Parts of this driver are based on the following: > > + * - Kvaser linux leaf driver (version 4.78) > > + * - CAN driver for esd CAN-USB/2 > > + * > > + * Copyright (C) 2002-2006 KVASER AB, Sweden. All rights reserved. > > + * Copyright (C) 2010 Matthias Fuchs <matthias.fu...@esd.eu>, esd gmbh > > + * Copyright (C) 2012 Olivier Sobrie <oliv...@sobrie.be> > > + */ > > + > > +#include <linux/init.h> > > +#include <linux/completion.h> > > +#include <linux/module.h> > > +#include <linux/netdevice.h> > > +#include <linux/usb.h> > > + > > +#include <linux/can.h> > > +#include <linux/can/dev.h> > > +#include <linux/can/error.h> > > + > > +#define MAX_TX_URBS 16 > > +#define MAX_RX_URBS 4 > > +#define START_TIMEOUT 1000 /* msecs */ > > +#define STOP_TIMEOUT 1000 /* msecs */ > > +#define USB_SEND_TIMEOUT 1000 /* msecs */ > > +#define USB_RECV_TIMEOUT 1000 /* msecs */ > > +#define RX_BUFFER_SIZE 3072 > > +#define CAN_USB_CLOCK 8000000 > > +#define MAX_NET_DEVICES 3 > > + > > +/* Kvaser USB devices */ > > +#define KVASER_VENDOR_ID 0x0bfd > > +#define USB_LEAF_DEVEL_PRODUCT_ID 10 > > +#define USB_LEAF_LITE_PRODUCT_ID 11 > > +#define USB_LEAF_PRO_PRODUCT_ID 12 > > +#define USB_LEAF_SPRO_PRODUCT_ID 14 > > +#define USB_LEAF_PRO_LS_PRODUCT_ID 15 > > +#define USB_LEAF_PRO_SWC_PRODUCT_ID 16 > > +#define USB_LEAF_PRO_LIN_PRODUCT_ID 17 > > +#define USB_LEAF_SPRO_LS_PRODUCT_ID 18 > > +#define USB_LEAF_SPRO_SWC_PRODUCT_ID 19 > > +#define USB_MEMO2_DEVEL_PRODUCT_ID 22 > > +#define USB_MEMO2_HSHS_PRODUCT_ID 23 > > +#define USB_UPRO_HSHS_PRODUCT_ID 24 > > +#define USB_LEAF_LITE_GI_PRODUCT_ID 25 > > +#define USB_LEAF_PRO_OBDII_PRODUCT_ID 26 > > +#define USB_MEMO2_HSLS_PRODUCT_ID 27 > > +#define USB_LEAF_LITE_CH_PRODUCT_ID 28 > > +#define USB_BLACKBIRD_SPRO_PRODUCT_ID 29 > > +#define USB_OEM_MERCURY_PRODUCT_ID 34 > > +#define USB_OEM_LEAF_PRODUCT_ID 35 > > +#define USB_CAN_R_PRODUCT_ID 39 > > + > > +/* USB devices features */ > > +#define KVASER_HAS_SILENT_MODE BIT(0) > > +#define KVASER_HAS_TXRX_ERRORS BIT(1) > > + > > +/* Message header size */ > > +#define MSG_HEADER_LEN 2 > > + > > +/* Can message flags */ > > +#define MSG_FLAG_ERROR_FRAME BIT(0) > > +#define MSG_FLAG_OVERRUN BIT(1) > > +#define MSG_FLAG_NERR BIT(2) > > +#define MSG_FLAG_WAKEUP BIT(3) > > +#define MSG_FLAG_REMOTE_FRAME BIT(4) > > +#define MSG_FLAG_RESERVED BIT(5) > > +#define MSG_FLAG_TX_ACK BIT(6) > > +#define MSG_FLAG_TX_REQUEST BIT(7) > > + > > +/* Can states */ > > +#define M16C_STATE_BUS_RESET BIT(0) > > +#define M16C_STATE_BUS_ERROR BIT(4) > > +#define M16C_STATE_BUS_PASSIVE BIT(5) > > +#define M16C_STATE_BUS_OFF BIT(6) > > + > > +/* Can msg ids */ > > +#define CMD_RX_STD_MESSAGE 12 > > +#define CMD_TX_STD_MESSAGE 13 > > +#define CMD_RX_EXT_MESSAGE 14 > > +#define CMD_TX_EXT_MESSAGE 15 > > +#define CMD_SET_BUS_PARAMS 16 > > +#define CMD_GET_BUS_PARAMS 17 > > +#define CMD_GET_BUS_PARAMS_REPLY 18 > > +#define CMD_GET_CHIP_STATE 19 > > +#define CMD_CHIP_STATE_EVENT 20 > > +#define CMD_SET_CTRL_MODE 21 > > +#define CMD_GET_CTRL_MODE 22 > > +#define CMD_GET_CTRL_MODE_REPLY 23 > > +#define CMD_RESET_CHIP 24 > > +#define CMD_RESET_CARD 25 > > +#define CMD_START_CHIP 26 > > +#define CMD_START_CHIP_REPLY 27 > > +#define CMD_STOP_CHIP 28 > > +#define CMD_STOP_CHIP_REPLY 29 > > +#define CMD_GET_CARD_INFO2 32 > > +#define CMD_GET_CARD_INFO 34 > > +#define CMD_GET_CARD_INFO_REPLY 35 > > +#define CMD_GET_SOFTWARE_INFO 38 > > +#define CMD_GET_SOFTWARE_INFO_REPLY 39 > > +#define CMD_ERROR_EVENT 45 > > +#define CMD_FLUSH_QUEUE 48 > > +#define CMD_RESET_ERROR_COUNTER 49 > > +#define CMD_TX_ACKNOWLEDGE 50 > > +#define CMD_CAN_ERROR_EVENT 51 > > +#define CMD_USB_THROTTLE 77 > > +#define CMD_LOG_MESSAGE 106 > > + > > +/* error factors */ > > +#define M16C_EF_ACKE BIT(0) > > +#define M16C_EF_CRCE BIT(1) > > +#define M16C_EF_FORME BIT(2) > > +#define M16C_EF_STFE BIT(3) > > +#define M16C_EF_BITE0 BIT(4) > > +#define M16C_EF_BITE1 BIT(5) > > +#define M16C_EF_RCVE BIT(6) > > +#define M16C_EF_TRE BIT(7) > > + > > +/* bittiming parameters */ > > +#define KVASER_USB_TSEG1_MIN 1 > > +#define KVASER_USB_TSEG1_MAX 16 > > +#define KVASER_USB_TSEG2_MIN 1 > > +#define KVASER_USB_TSEG2_MAX 8 > > +#define KVASER_USB_SJW_MAX 4 > > +#define KVASER_USB_BRP_MIN 1 > > +#define KVASER_USB_BRP_MAX 64 > > +#define KVASER_USB_BRP_INC 1 > > + > > +/* ctrl modes */ > > +#define KVASER_CTRL_MODE_NORMAL 1 > > +#define KVASER_CTRL_MODE_SILENT 2 > > +#define KVASER_CTRL_MODE_SELFRECEPTION 3 > > +#define KVASER_CTRL_MODE_OFF 4 > > + > > +struct kvaser_msg_simple { > > + u8 tid; > > + u8 channel; > > +} __packed; > > + > > +struct kvaser_msg_cardinfo { > > + u8 tid; > > + u8 nchannels; > > + __le32 serial_number; > > + __le32 padding; > > + __le32 clock_resolution; > > + __le32 mfgdate; > > + u8 ean[8]; > > + u8 hw_revision; > > + u8 usb_hs_mode; > > + __le16 padding2; > > +} __packed; > > + > > +struct kvaser_msg_cardinfo2 { > > + u8 tid; > > + u8 channel; > > + u8 pcb_id[24]; > > + __le32 oem_unlock_code; > > +} __packed; > > + > > +struct kvaser_msg_softinfo { > > + u8 tid; > > + u8 channel; > > + __le32 sw_options; > > + __le32 fw_version; > > + __le16 max_outstanding_tx; > > + __le16 padding[9]; > > +} __packed; > > + > > +struct kvaser_msg_busparams { > > + u8 tid; > > + u8 channel; > > + __le32 bitrate; > > + u8 tseg1; > > + u8 tseg2; > > + u8 sjw; > > + u8 no_samp; > > +} __packed; > > + > > +struct kvaser_msg_tx_can { > > + u8 channel; > > + u8 tid; > > + u8 msg[14]; > > + u8 padding; > > + u8 flags; > > +} __packed; > > + > > +struct kvaser_msg_rx_can { > > + u8 channel; > > + u8 flag; > > + __le16 time[3]; > > + u8 msg[14]; > > +} __packed; > > + > > +struct kvaser_msg_chip_state_event { > > + u8 tid; > > + u8 channel; > > + __le16 time[3]; > > + u8 tx_errors_count; > > + u8 rx_errors_count; > > + u8 status; > > + u8 padding[3]; > > +} __packed; > > + > > +struct kvaser_msg_tx_acknowledge { > > + u8 channel; > > + u8 tid; > > + __le16 time[3]; > > + u8 flags; > > + u8 time_offset; > > +} __packed; > > + > > +struct kvaser_msg_error_event { > > + u8 tid; > > + u8 flags; > > + __le16 time[3]; > > + u8 channel; > > + u8 padding; > > + u8 tx_errors_count; > > + u8 rx_errors_count; > > + u8 status; > > + u8 error_factor; > > +} __packed; > > + > > +struct kvaser_msg_ctrl_mode { > > + u8 tid; > > + u8 channel; > > + u8 ctrl_mode; > > + u8 padding[3]; > > +} __packed; > > + > > +struct kvaser_msg_flush_queue { > > + u8 tid; > > + u8 channel; > > + u8 flags; > > + u8 padding[3]; > > +} __packed; > > + > > +struct kvaser_msg_log_message { > > + u8 channel; > > + u8 flags; > > + __le16 time[3]; > > + u8 dlc; > > + u8 time_offset; > > + __le32 id; > > + u8 data[8]; > > +} __packed; > > + > > +struct kvaser_msg { > > + u8 len; > > + u8 id; > > + union { > > + struct kvaser_msg_simple simple; > > + struct kvaser_msg_cardinfo cardinfo; > > + struct kvaser_msg_cardinfo2 cardinfo2; > > + struct kvaser_msg_softinfo softinfo; > > + struct kvaser_msg_busparams busparams; > > + struct kvaser_msg_tx_can tx_can; > > + struct kvaser_msg_rx_can rx_can; > > + struct kvaser_msg_chip_state_event chip_state_event; > > + struct kvaser_msg_tx_acknowledge tx_acknowledge; > > + struct kvaser_msg_error_event error_event; > > + struct kvaser_msg_ctrl_mode ctrl_mode; > > + struct kvaser_msg_flush_queue flush_queue; > > + struct kvaser_msg_log_message log_message; > > + } u; > > +} __packed; > > + > > +struct kvaser_usb_tx_urb_context { > > + struct kvaser_usb_net_priv *priv; > > + u32 echo_index; > > + int dlc; > > +}; > > + > > +struct kvaser_usb { > > + struct usb_device *udev; > > + struct kvaser_usb_net_priv *nets[MAX_NET_DEVICES]; > > + > > + struct usb_endpoint_descriptor *bulk_in, *bulk_out; > > + struct usb_anchor rx_submitted; > > + > > + u32 fw_version; > > + unsigned int nchannels; > > + > > + bool rxinitdone; > > + void *rxbuf[MAX_RX_URBS]; > > + dma_addr_t rxbuf_dma[MAX_RX_URBS]; > > +}; > > + > > +struct kvaser_usb_net_priv { > > + struct can_priv can; > > + > > + atomic_t active_tx_urbs; > > + struct usb_anchor tx_submitted; > > + struct kvaser_usb_tx_urb_context tx_contexts[MAX_TX_URBS]; > > + > > + struct completion start_comp, stop_comp; > > + > > + struct kvaser_usb *dev; > > + struct net_device *netdev; > > + int channel; > > + > > + struct can_berr_counter bec; > > +}; > > + > > +static struct usb_device_id kvaser_usb_table[] = { > > + { USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_DEVEL_PRODUCT_ID) }, > > + { USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_LITE_PRODUCT_ID) }, > > + { USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_PRO_PRODUCT_ID), > > + .driver_info = KVASER_HAS_TXRX_ERRORS | > > + KVASER_HAS_SILENT_MODE }, > > + { USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_SPRO_PRODUCT_ID), > > + .driver_info = KVASER_HAS_TXRX_ERRORS | > > + KVASER_HAS_SILENT_MODE }, > > + { USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_PRO_LS_PRODUCT_ID), > > + .driver_info = KVASER_HAS_TXRX_ERRORS | > > + KVASER_HAS_SILENT_MODE }, > > + { USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_PRO_SWC_PRODUCT_ID), > > + .driver_info = KVASER_HAS_TXRX_ERRORS | > > + KVASER_HAS_SILENT_MODE }, > > + { USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_PRO_LIN_PRODUCT_ID), > > + .driver_info = KVASER_HAS_TXRX_ERRORS | > > + KVASER_HAS_SILENT_MODE }, > > + { USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_SPRO_LS_PRODUCT_ID), > > + .driver_info = KVASER_HAS_TXRX_ERRORS | > > + KVASER_HAS_SILENT_MODE }, > > + { USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_SPRO_SWC_PRODUCT_ID), > > + .driver_info = KVASER_HAS_TXRX_ERRORS | > > + KVASER_HAS_SILENT_MODE }, > > + { USB_DEVICE(KVASER_VENDOR_ID, USB_MEMO2_DEVEL_PRODUCT_ID), > > + .driver_info = KVASER_HAS_TXRX_ERRORS | > > + KVASER_HAS_SILENT_MODE }, > > + { USB_DEVICE(KVASER_VENDOR_ID, USB_MEMO2_HSHS_PRODUCT_ID), > > + .driver_info = KVASER_HAS_TXRX_ERRORS | > > + KVASER_HAS_SILENT_MODE }, > > + { USB_DEVICE(KVASER_VENDOR_ID, USB_UPRO_HSHS_PRODUCT_ID), > > + .driver_info = KVASER_HAS_TXRX_ERRORS }, > > + { USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_LITE_GI_PRODUCT_ID) }, > > + { USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_PRO_OBDII_PRODUCT_ID), > > + .driver_info = KVASER_HAS_TXRX_ERRORS | > > + KVASER_HAS_SILENT_MODE }, > > + { USB_DEVICE(KVASER_VENDOR_ID, USB_MEMO2_HSLS_PRODUCT_ID), > > + .driver_info = KVASER_HAS_TXRX_ERRORS }, > > + { USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_LITE_CH_PRODUCT_ID), > > + .driver_info = KVASER_HAS_TXRX_ERRORS }, > > + { USB_DEVICE(KVASER_VENDOR_ID, USB_BLACKBIRD_SPRO_PRODUCT_ID), > > + .driver_info = KVASER_HAS_TXRX_ERRORS }, > > + { USB_DEVICE(KVASER_VENDOR_ID, USB_OEM_MERCURY_PRODUCT_ID), > > + .driver_info = KVASER_HAS_TXRX_ERRORS }, > > + { USB_DEVICE(KVASER_VENDOR_ID, USB_OEM_LEAF_PRODUCT_ID), > > + .driver_info = KVASER_HAS_TXRX_ERRORS }, > > + { USB_DEVICE(KVASER_VENDOR_ID, USB_CAN_R_PRODUCT_ID), > > + .driver_info = KVASER_HAS_TXRX_ERRORS }, > > + { } > > +}; > > +MODULE_DEVICE_TABLE(usb, kvaser_usb_table); > > + > > +static inline int kvaser_usb_send_msg(const struct kvaser_usb *dev, > > + struct kvaser_msg *msg) > > +{ > > + int actual_len; > > + > > + return usb_bulk_msg(dev->udev, > > + usb_sndbulkpipe(dev->udev, > > + dev->bulk_out->bEndpointAddress), > > + msg, msg->len, &actual_len, > > + USB_SEND_TIMEOUT); > > +} > > + > > +static int kvaser_usb_wait_msg(const struct kvaser_usb *dev, u8 id, > > + struct kvaser_msg *msg) > > +{ > > + struct kvaser_msg *tmp; > > + void *buf; > > + int actual_len; > > + int err; > > + int pos = 0; > > + > > + buf = kzalloc(RX_BUFFER_SIZE, GFP_KERNEL); > > + if (!buf) > > + return -ENOMEM; > > + > > + err = usb_bulk_msg(dev->udev, > > + usb_rcvbulkpipe(dev->udev, > > + dev->bulk_in->bEndpointAddress), > > + buf, RX_BUFFER_SIZE, &actual_len, > > + USB_RECV_TIMEOUT); > > + if (err < 0) > > + goto end; > > + > > + while (pos <= actual_len - MSG_HEADER_LEN) { > > + tmp = buf + pos; > > + > > + if (!tmp->len) > > + break; > > + > > + if (pos + tmp->len > actual_len) { > > + dev_err(dev->udev->dev.parent, "Format error\n"); > > + break; > > + } > > + > > + if (tmp->id == id) { > > + memcpy(msg, tmp, tmp->len); > > + goto end; > > + } > > + > > + pos += tmp->len; > > + } > > + > > + err = -EINVAL; > > + > > +end: > > + kfree(buf); > > + > > + return err; > > +} > > + > > +static int kvaser_usb_send_simple_msg(const struct kvaser_usb *dev, > > + u8 msg_id, int channel) > > +{ > > + struct kvaser_msg msg = { > > + .len = MSG_HEADER_LEN + sizeof(struct kvaser_msg_simple), > > + .id = msg_id, > > + .u.simple.channel = channel, > > + .u.simple.tid = 0xff, > > + }; > > + > > + return kvaser_usb_send_msg(dev, &msg); > > +} > > + > > +static int kvaser_usb_get_software_info(struct kvaser_usb *dev) > > +{ > > + struct kvaser_msg msg; > > + int err; > > + > > + err = kvaser_usb_send_simple_msg(dev, CMD_GET_SOFTWARE_INFO, 0); > > + if (err) > > + return err; > > + > > + err = kvaser_usb_wait_msg(dev, CMD_GET_SOFTWARE_INFO_REPLY, &msg); > > + if (err) > > + return err; > > + > > + dev->fw_version = le32_to_cpu(msg.u.softinfo.fw_version); > > + > > + return 0; > > +} > > + > > +static int kvaser_usb_get_card_info(struct kvaser_usb *dev) > > +{ > > + struct kvaser_msg msg; > > + int err; > > + > > + err = kvaser_usb_send_simple_msg(dev, CMD_GET_CARD_INFO, 0); > > + if (err) > > + return err; > > + > > + err = kvaser_usb_wait_msg(dev, CMD_GET_CARD_INFO_REPLY, &msg); > > + if (err) > > + return err; > > + > > + dev->nchannels = msg.u.cardinfo.nchannels; > > + > > + return 0; > > +} > > + > > +static void kvaser_usb_tx_acknowledge(const struct kvaser_usb *dev, > > + const struct kvaser_msg *msg) > > +{ > > + struct net_device_stats *stats; > > + struct kvaser_usb_tx_urb_context *context; > > + struct kvaser_usb_net_priv *priv; > > + struct sk_buff *skb; > > + struct can_frame *cf; > > + u8 channel = msg->u.tx_acknowledge.channel; > > + u8 tid = msg->u.tx_acknowledge.tid; > > + > > + if (channel >= dev->nchannels) { > > + dev_err(dev->udev->dev.parent, > > + "Invalid channel number (%d)\n", channel); > > + return; > > + } > > + > > + priv = dev->nets[channel]; > > + > > + if (!netif_device_present(priv->netdev)) > > + return; > > + > > + stats = &priv->netdev->stats; > > + > > + context = &priv->tx_contexts[tid % MAX_TX_URBS]; > > + > > + /* Sometimes the state change doesn't come after a bus-off event */ > > + if (priv->can.restart_ms && > > + (priv->can.state >= CAN_STATE_BUS_OFF)) { > > + skb = alloc_can_err_skb(priv->netdev, &cf); > > + if (skb) { > > + cf->can_id |= CAN_ERR_RESTARTED; > > + netif_rx(skb); > > + > > + stats->rx_packets++; > > + stats->rx_bytes += cf->can_dlc; > > + } else { > > + netdev_err(priv->netdev, > > + "No memory left for err_skb\n"); > > + } > > + > > + priv->can.can_stats.restarts++; > > + netif_carrier_on(priv->netdev); > > + > > + priv->can.state = CAN_STATE_ERROR_ACTIVE; > > + } > > + > > + stats->tx_packets++; > > + stats->tx_bytes += context->dlc; > > + can_get_echo_skb(priv->netdev, context->echo_index); > > + > > + context->echo_index = MAX_TX_URBS; > > + atomic_dec(&priv->active_tx_urbs); > > + > > + netif_wake_queue(priv->netdev); > > +} > > + > > +static void kvaser_usb_simple_msg_callback(struct urb *urb) > > +{ > > + struct net_device *netdev = urb->context; > > + > > + kfree(urb->transfer_buffer); > > + > > + if (urb->status) > > + netdev_warn(netdev, "urb status received: %d\n", > > + urb->status); > > +} > > + > > +static int kvaser_usb_simple_msg_async(struct kvaser_usb_net_priv *priv, > > + u8 msg_id) > > +{ > > + struct kvaser_usb *dev = priv->dev; > > + struct net_device *netdev = priv->netdev; > > + struct kvaser_msg *msg; > > + struct urb *urb; > > + void *buf; > > + int err; > > + > > + urb = usb_alloc_urb(0, GFP_ATOMIC); > > + if (!urb) { > > + netdev_err(netdev, "No memory left for URBs\n"); > > + return -ENOMEM; > > + } > > + > > + buf = kmalloc(sizeof(struct kvaser_msg), GFP_ATOMIC); > > + if (!buf) { > > + netdev_err(netdev, "No memory left for USB buffer\n"); > > + usb_free_urb(urb); > > + return -ENOMEM; > > + } > > + > > + msg = (struct kvaser_msg *)buf; > > + msg->len = MSG_HEADER_LEN + sizeof(struct kvaser_msg_simple); > > + msg->id = msg_id; > > + msg->u.simple.channel = priv->channel; > > + > > + usb_fill_bulk_urb(urb, dev->udev, > > + usb_sndbulkpipe(dev->udev, > > + dev->bulk_out->bEndpointAddress), > > + buf, msg->len, > > + kvaser_usb_simple_msg_callback, priv); > > + usb_anchor_urb(urb, &priv->tx_submitted); > > + > > + err = usb_submit_urb(urb, GFP_ATOMIC); > > + if (err) { > > + netdev_err(netdev, "Error transmitting URB\n"); > > + usb_unanchor_urb(urb); > > + usb_free_urb(urb); > > + kfree(buf); > > + return err; > > + } > > + > > + usb_free_urb(urb); > > + > > + return 0; > > +} > > + > > +static void kvaser_usb_unlink_tx_urbs(struct kvaser_usb_net_priv *priv) > > +{ > > + int i; > > + > > + usb_kill_anchored_urbs(&priv->tx_submitted); > > + atomic_set(&priv->active_tx_urbs, 0); > > + > > + for (i = 0; i < MAX_TX_URBS; i++) > > + priv->tx_contexts[i].echo_index = MAX_TX_URBS; > > +} > > + > > +static void kvaser_usb_rx_error(const struct kvaser_usb *dev, > > + const struct kvaser_msg *msg) > > +{ > > + struct can_frame *cf; > > + struct sk_buff *skb; > > + struct net_device_stats *stats; > > + struct kvaser_usb_net_priv *priv; > > + unsigned int new_state; > > + u8 channel, status, txerr, rxerr, error_factor; > > + > > + switch (msg->id) { > > + case CMD_CAN_ERROR_EVENT: > > + channel = msg->u.error_event.channel; > > + status = msg->u.error_event.status; > > + txerr = msg->u.error_event.tx_errors_count; > > + rxerr = msg->u.error_event.rx_errors_count; > > + error_factor = msg->u.error_event.error_factor; > > + break; > > + case CMD_LOG_MESSAGE: > > + channel = msg->u.log_message.channel; > > + status = msg->u.log_message.data[0]; > > + txerr = msg->u.log_message.data[2]; > > + rxerr = msg->u.log_message.data[3]; > > + error_factor = msg->u.log_message.data[1]; > > + break; > > + case CMD_CHIP_STATE_EVENT: > > + channel = msg->u.chip_state_event.channel; > > + status = msg->u.chip_state_event.status; > > + txerr = msg->u.chip_state_event.tx_errors_count; > > + rxerr = msg->u.chip_state_event.rx_errors_count; > > + error_factor = 0; > > + break; > > + default: > > + dev_err(dev->udev->dev.parent, "Invalid msg id (%d)\n", > > + msg->id); > > + return; > > + } > > + > > + if (channel >= dev->nchannels) { > > + dev_err(dev->udev->dev.parent, > > + "Invalid channel number (%d)\n", channel); > > + return; > > + } > > + > > + priv = dev->nets[channel]; > > + stats = &priv->netdev->stats; > > + > > + if (status & M16C_STATE_BUS_RESET) { > > + kvaser_usb_unlink_tx_urbs(priv); > > + return; > > + } > > + > > + skb = alloc_can_err_skb(priv->netdev, &cf); > > + if (!skb) { > > + stats->rx_dropped++; > > + return; > > + } > > + > > + new_state = priv->can.state; > > + > > + netdev_dbg(priv->netdev, "Error status: 0x%02x\n", status); > > + > > + if (status & M16C_STATE_BUS_OFF) { > > + cf->can_id |= CAN_ERR_BUSOFF; > > + > > + priv->can.can_stats.bus_off++; > > + if (!priv->can.restart_ms) > > + kvaser_usb_simple_msg_async(priv, CMD_STOP_CHIP); > > + > > + netif_carrier_off(priv->netdev); > > + > > + new_state = CAN_STATE_BUS_OFF; > > + } else if (status & M16C_STATE_BUS_PASSIVE) { > > + if (priv->can.state != CAN_STATE_ERROR_PASSIVE) { > > + cf->can_id |= CAN_ERR_CRTL; > > + > > + if (txerr || rxerr) > > + cf->data[1] = (txerr > rxerr) > > + ? CAN_ERR_CRTL_TX_PASSIVE > > + : CAN_ERR_CRTL_RX_PASSIVE; > > + else > > + cf->data[1] = CAN_ERR_CRTL_TX_PASSIVE | > > + CAN_ERR_CRTL_RX_PASSIVE; > > + > > + priv->can.can_stats.error_passive++; > > + } > > + > > + new_state = CAN_STATE_ERROR_PASSIVE; > > + } > > + > > + if (status == M16C_STATE_BUS_ERROR) { > > + if ((priv->can.state < CAN_STATE_ERROR_WARNING) && > > + ((txerr >= 96) || (rxerr >= 96))) { > > + cf->can_id |= CAN_ERR_CRTL; > > + cf->data[1] = (txerr > rxerr) > > + ? CAN_ERR_CRTL_TX_WARNING > > + : CAN_ERR_CRTL_RX_WARNING; > > + > > + priv->can.can_stats.error_warning++; > > + new_state = CAN_STATE_ERROR_WARNING; > > + } else if (priv->can.state > CAN_STATE_ERROR_ACTIVE) { > > + cf->can_id |= CAN_ERR_PROT; > > + cf->data[2] = CAN_ERR_PROT_ACTIVE; > > + > > + new_state = CAN_STATE_ERROR_ACTIVE; > > + } > > + } > > + > > + if (!status) { > > + cf->can_id |= CAN_ERR_PROT; > > + cf->data[2] = CAN_ERR_PROT_ACTIVE; > > + > > + new_state = CAN_STATE_ERROR_ACTIVE; > > + } > > + > > + if (priv->can.restart_ms && > > + (priv->can.state >= CAN_STATE_BUS_OFF) && > > + (new_state < CAN_STATE_BUS_OFF)) { > > + cf->can_id |= CAN_ERR_RESTARTED; > > + netif_carrier_on(priv->netdev); > > + > > + priv->can.can_stats.restarts++; > > + } > > + > > + if (error_factor) { > > + priv->can.can_stats.bus_error++; > > + stats->rx_errors++; > > + > > + cf->can_id |= CAN_ERR_BUSERROR | CAN_ERR_PROT; > > + > > + if (error_factor & M16C_EF_ACKE) > > + cf->data[3] |= (CAN_ERR_PROT_LOC_ACK); > > + if (error_factor & M16C_EF_CRCE) > > + cf->data[3] |= (CAN_ERR_PROT_LOC_CRC_SEQ | > > + CAN_ERR_PROT_LOC_CRC_DEL); > > + if (error_factor & M16C_EF_FORME) > > + cf->data[2] |= CAN_ERR_PROT_FORM; > > + if (error_factor & M16C_EF_STFE) > > + cf->data[2] |= CAN_ERR_PROT_STUFF; > > + if (error_factor & M16C_EF_BITE0) > > + cf->data[2] |= CAN_ERR_PROT_BIT0; > > + if (error_factor & M16C_EF_BITE1) > > + cf->data[2] |= CAN_ERR_PROT_BIT1; > > + if (error_factor & M16C_EF_TRE) > > + cf->data[2] |= CAN_ERR_PROT_TX; > > + } > > + > > + cf->data[6] = txerr; > > + cf->data[7] = rxerr; > > + > > + priv->bec.txerr = txerr; > > + priv->bec.rxerr = rxerr; > > + > > + priv->can.state = new_state; > > + > > + netif_rx(skb); > > + > > + stats->rx_packets++; > > + stats->rx_bytes += cf->can_dlc; > > +} > > + > > +static void kvaser_usb_rx_can_err(const struct kvaser_usb_net_priv *priv, > > + const struct kvaser_msg *msg) > > +{ > > + struct can_frame *cf; > > + struct sk_buff *skb; > > + struct net_device_stats *stats = &priv->netdev->stats; > > + > > + if (msg->u.rx_can.flag & (MSG_FLAG_ERROR_FRAME | > > + MSG_FLAG_NERR)) { > > + netdev_err(priv->netdev, "Unknow error (flags: 0x%02x)\n", > > + msg->u.rx_can.flag); > > + > > + stats->rx_errors++; > > + return; > > + } > > + > > + if (msg->u.rx_can.flag & MSG_FLAG_OVERRUN) { > > + skb = alloc_can_err_skb(priv->netdev, &cf); > > + if (!skb) { > > + stats->tx_dropped++; > > Should be rx, as we are in the rx function. Ok I'll fix that. > > > + return; > > + } > > + > > + cf->can_id |= CAN_ERR_CRTL; > > + cf->data[1] = CAN_ERR_CRTL_RX_OVERFLOW; > > + > > + stats->rx_over_errors++; > > + stats->rx_errors++; > > + > > + netif_rx(skb); > > + > > + stats->rx_packets++; > > + stats->rx_bytes += cf->can_dlc; > > + } > > +} > > + > > +static void kvaser_usb_rx_can_msg(const struct kvaser_usb *dev, > > + const struct kvaser_msg *msg) > > +{ > > + struct kvaser_usb_net_priv *priv; > > + struct can_frame *cf; > > + struct sk_buff *skb; > > + struct net_device_stats *stats; > > + u8 channel = msg->u.rx_can.channel; > > + > > + if (channel >= dev->nchannels) { > > + dev_err(dev->udev->dev.parent, > > + "Invalid channel number (%d)\n", channel); > > + return; > > + } > > + > > + priv = dev->nets[channel]; > > + stats = &priv->netdev->stats; > > + > > + if (msg->u.rx_can.flag & (MSG_FLAG_ERROR_FRAME | MSG_FLAG_NERR | > > + MSG_FLAG_OVERRUN)) { > > + kvaser_usb_rx_can_err(priv, msg); > > + return; > > + } else if (msg->u.rx_can.flag & ~MSG_FLAG_REMOTE_FRAME) { > > + netdev_warn(priv->netdev, > > + "Unhandled frame (flags: 0x%02x)", > > + msg->u.rx_can.flag); > > + return; > > + } > > + > > + skb = alloc_can_skb(priv->netdev, &cf); > > + if (!skb) { > > + stats->tx_dropped++; > > + return; > > + } > > + > > + cf->can_id = ((msg->u.rx_can.msg[0] & 0x1f) << 6) | > > + (msg->u.rx_can.msg[1] & 0x3f); > > + cf->can_dlc = get_can_dlc(msg->u.rx_can.msg[5]); > > + > > + if (msg->id == CMD_RX_EXT_MESSAGE) { > > + cf->can_id <<= 18; > > + cf->can_id |= ((msg->u.rx_can.msg[2] & 0x0f) << 14) | > > + ((msg->u.rx_can.msg[3] & 0xff) << 6) | > > + (msg->u.rx_can.msg[4] & 0x3f); > > + cf->can_id |= CAN_EFF_FLAG; > > + } > > + > > + if (msg->u.rx_can.flag & MSG_FLAG_REMOTE_FRAME) > > + cf->can_id |= CAN_RTR_FLAG; > > + else > > + memcpy(cf->data, &msg->u.rx_can.msg[6], cf->can_dlc); > > + > > + netif_rx(skb); > > + > > + stats->rx_packets++; > > + stats->rx_bytes += cf->can_dlc; > > +} > > + > > +static void kvaser_usb_start_chip_reply(const struct kvaser_usb *dev, > > + const struct kvaser_msg *msg) > > +{ > > + struct kvaser_usb_net_priv *priv; > > + u8 channel = msg->u.simple.channel; > > + > > + if (channel >= dev->nchannels) { > > + dev_err(dev->udev->dev.parent, > > + "Invalid channel number (%d)\n", channel); > > + return; > > + } > > + > > + priv = dev->nets[channel]; > > + > > + if (completion_done(&priv->start_comp) && > > + netif_queue_stopped(priv->netdev)) { > > + netif_wake_queue(priv->netdev); > > + } else { > > + netif_start_queue(priv->netdev); > > + complete(&priv->start_comp); > > + } > > +} > > + > > +static void kvaser_usb_stop_chip_reply(const struct kvaser_usb *dev, > > + const struct kvaser_msg *msg) > > +{ > > + struct kvaser_usb_net_priv *priv; > > + u8 channel = msg->u.simple.channel; > > + > > + if (channel >= dev->nchannels) { > > + dev_err(dev->udev->dev.parent, > > + "Invalid channel number (%d)\n", channel); > > + return; > > + } > > + > > + priv = dev->nets[channel]; > > + > > + complete(&priv->stop_comp); > > +} > > + > > +static void kvaser_usb_handle_message(const struct kvaser_usb *dev, > > + const struct kvaser_msg *msg) > > +{ > > + switch (msg->id) { > > + case CMD_START_CHIP_REPLY: > > + kvaser_usb_start_chip_reply(dev, msg); > > + break; > > + > > + case CMD_STOP_CHIP_REPLY: > > + kvaser_usb_stop_chip_reply(dev, msg); > > + break; > > + > > + case CMD_RX_STD_MESSAGE: > > + case CMD_RX_EXT_MESSAGE: > > + kvaser_usb_rx_can_msg(dev, msg); > > + break; > > + > > + case CMD_CHIP_STATE_EVENT: > > + case CMD_CAN_ERROR_EVENT: > > + kvaser_usb_rx_error(dev, msg); > > + break; > > + > > + case CMD_LOG_MESSAGE: > > + if (msg->u.log_message.flags & MSG_FLAG_ERROR_FRAME) > > + kvaser_usb_rx_error(dev, msg); > > + break; > > + > > + case CMD_TX_ACKNOWLEDGE: > > + kvaser_usb_tx_acknowledge(dev, msg); > > + break; > > + > > + default: > > + dev_warn(dev->udev->dev.parent, > > + "Unhandled message (%d)\n", msg->id); > > + break; > > + } > > +} > > + > > +static void kvaser_usb_read_bulk_callback(struct urb *urb) > > +{ > > + struct kvaser_usb *dev = urb->context; > > + struct kvaser_msg *msg; > > + int pos = 0; > > + int err, i; > > + > > + switch (urb->status) { > > + case 0: > > + break; > > + case -ENOENT: > > + case -ESHUTDOWN: > > + return; > > + default: > > + dev_info(dev->udev->dev.parent, "Rx URB aborted (%d)\n", > > + urb->status); > > + goto resubmit_urb; > > + } > > + > > + while (pos <= urb->actual_length - MSG_HEADER_LEN) { > > + msg = urb->transfer_buffer + pos; > > + > > + if (!msg->len) > > + break; > > + > > + if (pos + msg->len > urb->actual_length) { > > + dev_err(dev->udev->dev.parent, "Format error\n"); > > + break; > > + } > > + > > + kvaser_usb_handle_message(dev, msg); > > + > > + pos += msg->len; > > + } > > + > > +resubmit_urb: > > + usb_fill_bulk_urb(urb, dev->udev, > > + usb_rcvbulkpipe(dev->udev, > > + dev->bulk_in->bEndpointAddress), > > + urb->transfer_buffer, RX_BUFFER_SIZE, > > + kvaser_usb_read_bulk_callback, dev); > > + > > + err = usb_submit_urb(urb, GFP_ATOMIC); > > + if (err == -ENODEV) { > > + for (i = 0; i < dev->nchannels; i++) { > > + if (!dev->nets[i]) > > + continue; > > + > > + netif_device_detach(dev->nets[i]->netdev); > > + } > > + } else if (err) { > > + dev_err(dev->udev->dev.parent, > > + "Failed resubmitting read bulk urb: %d\n", err); > > + } > > + > > + return; > > +} > > + > > +static int kvaser_usb_setup_rx_urbs(struct kvaser_usb *dev) > > +{ > > + int i, err = 0; > > + > > + if (dev->rxinitdone) > > + return 0; > > + > > + for (i = 0; i < MAX_RX_URBS; i++) { > > + struct urb *urb = NULL; > > + u8 *buf = NULL; > > + dma_addr_t buf_dma; > > + > > + urb = usb_alloc_urb(0, GFP_KERNEL); > > + if (!urb) { > > + dev_warn(dev->udev->dev.parent, > > + "No memory left for URBs\n"); > > + err = -ENOMEM; > > + break; > > + } > > + > > + buf = usb_alloc_coherent(dev->udev, RX_BUFFER_SIZE, > > + GFP_KERNEL, &buf_dma); > > + if (!buf) { > > + dev_warn(dev->udev->dev.parent, > > + "No memory left for USB buffer\n"); > > + usb_free_urb(urb); > > + err = -ENOMEM; > > + break; > > + } > > + > > + usb_fill_bulk_urb(urb, dev->udev, > > + usb_rcvbulkpipe(dev->udev, > > + dev->bulk_in->bEndpointAddress), > > + buf, RX_BUFFER_SIZE, > > + kvaser_usb_read_bulk_callback, > > + dev); > > + urb->transfer_dma = buf_dma; > > + urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; > > + usb_anchor_urb(urb, &dev->rx_submitted); > > + > > + err = usb_submit_urb(urb, GFP_KERNEL); > > + if (err) { > > + usb_unanchor_urb(urb); > > + usb_free_coherent(dev->udev, RX_BUFFER_SIZE, buf, > > + buf_dma); > > + usb_free_urb(urb); > > + break; > > + } > > + > > + dev->rxbuf[i] = buf; > > + dev->rxbuf_dma[i] = buf_dma; > > + > > + usb_free_urb(urb); > > + } > > + > > + if (i == 0) { > > + dev_warn(dev->udev->dev.parent, > > + "Cannot setup read URBs, error %d\n", err); > > + return err; > > + } else if (i < MAX_RX_URBS) { > > + dev_warn(dev->udev->dev.parent, > > + "RX performances may be slow\n"); > > + } > > + > > + dev->rxinitdone = true; > > + > > + return 0; > > +} > > + > > +static int kvaser_usb_set_opt_mode(const struct kvaser_usb_net_priv *priv) > > +{ > > + struct kvaser_msg msg = { > > + .id = CMD_SET_CTRL_MODE, > > + .len = MSG_HEADER_LEN + > > + sizeof(struct kvaser_msg_ctrl_mode), > > + .u.ctrl_mode.tid = 0xff, > > + .u.ctrl_mode.channel = priv->channel, > > + }; > > + > > + if (priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY) > > + msg.u.ctrl_mode.ctrl_mode = KVASER_CTRL_MODE_SILENT; > > + else > > + msg.u.ctrl_mode.ctrl_mode = KVASER_CTRL_MODE_NORMAL; > > + > > + return kvaser_usb_send_msg(priv->dev, &msg); > > +} > > + > > +static int kvaser_usb_start_chip(struct kvaser_usb_net_priv *priv) > > +{ > > + int err; > > + > > + init_completion(&priv->start_comp); > > + > > + err = kvaser_usb_send_simple_msg(priv->dev, CMD_START_CHIP, > > + priv->channel); > > + if (err) > > + return err; > > + > > + if (!wait_for_completion_timeout(&priv->start_comp, > > + msecs_to_jiffies(START_TIMEOUT))) > > + return -ETIMEDOUT; > > + > > + return 0; > > +} > > + > > +static int kvaser_usb_open(struct net_device *netdev) > > +{ > > + struct kvaser_usb_net_priv *priv = netdev_priv(netdev); > > + struct kvaser_usb *dev = priv->dev; > > + int err; > > + > > + err = open_candev(netdev); > > + if (err) > > + return err; > > + > > + err = kvaser_usb_setup_rx_urbs(dev); > > + if (err) > > + goto error; > > + > > + err = kvaser_usb_set_opt_mode(priv); > > + if (err) > > + goto error; > > + > > + err = kvaser_usb_start_chip(priv); > > + if (err) { > > + netdev_warn(netdev, "Cannot start device, error %d\n", err); > > + goto error; > > + } > > + > > + priv->can.state = CAN_STATE_ERROR_ACTIVE; > > + > > + return 0; > > + > > +error: > > + close_candev(netdev); > > + return err; > > +} > > + > > +static void kvaser_usb_unlink_all_urbs(struct kvaser_usb *dev) > > +{ > > + int i; > > + > > + usb_kill_anchored_urbs(&dev->rx_submitted); > > + > > + for (i = 0; i < MAX_RX_URBS; i++) > > + usb_free_coherent(dev->udev, RX_BUFFER_SIZE, > > + dev->rxbuf[i], > > + dev->rxbuf_dma[i]); > > + > > + for (i = 0; i < MAX_NET_DEVICES; i++) { > > + struct kvaser_usb_net_priv *priv = dev->nets[i]; > > + > > + if (priv) > > + kvaser_usb_unlink_tx_urbs(priv); > > + } > > +} > > + > > +static int kvaser_usb_stop_chip(struct kvaser_usb_net_priv *priv) > > +{ > > + int err; > > + > > + init_completion(&priv->stop_comp); > > + > > + err = kvaser_usb_send_simple_msg(priv->dev, CMD_STOP_CHIP, > > + priv->channel); > > + if (err) > > + return err; > > + > > + if (!wait_for_completion_timeout(&priv->stop_comp, > > + msecs_to_jiffies(STOP_TIMEOUT))) > > + return -ETIMEDOUT; > > + > > + return 0; > > +} > > + > > +static int kvaser_usb_flush_queue(struct kvaser_usb_net_priv *priv) > > +{ > > + struct kvaser_msg msg = { > > + .id = CMD_FLUSH_QUEUE, > > + .len = MSG_HEADER_LEN + > > + sizeof(struct kvaser_msg_flush_queue), > > + .u.flush_queue.channel = priv->channel, > > + .u.flush_queue.flags = 0x00, > > + }; > > + > > + return kvaser_usb_send_msg(priv->dev, &msg); > > +} > > + > > +static int kvaser_usb_close(struct net_device *netdev) > > +{ > > + struct kvaser_usb_net_priv *priv = netdev_priv(netdev); > > + struct kvaser_usb *dev = priv->dev; > > + int err; > > + > > + netif_stop_queue(netdev); > > + > > + err = kvaser_usb_flush_queue(priv); > > + if (err) > > + netdev_warn(netdev, "Cannot flush queue, error %d\n", err); > > + > > + if (kvaser_usb_send_simple_msg(dev, CMD_RESET_CHIP, priv->channel)) > > + netdev_warn(netdev, "Cannot reset card, error %d\n", err); > > + > > + err = kvaser_usb_stop_chip(priv); > > + if (err) > > + netdev_warn(netdev, "Cannot stop device, error %d\n", err); > > + > > + priv->can.state = CAN_STATE_STOPPED; > > + close_candev(priv->netdev); > > + > > + return 0; > > +} > > + > > +static void kvaser_usb_write_bulk_callback(struct urb *urb) > > +{ > > + struct kvaser_usb_tx_urb_context *context = urb->context; > > + struct kvaser_usb_net_priv *priv; > > + struct net_device *netdev; > > + > > + if (WARN_ON(!context)) > > + return; > > + > > + priv = context->priv; > > + netdev = priv->netdev; > > + > > + kfree(urb->transfer_buffer); > > + > > + if (!netif_device_present(netdev)) > > + return; > > + > > + if (urb->status) > > + netdev_info(netdev, "Tx URB aborted (%d)\n", urb->status); > > +} > > + > > +static netdev_tx_t kvaser_usb_start_xmit(struct sk_buff *skb, > > + struct net_device *netdev) > > +{ > > + struct kvaser_usb_net_priv *priv = netdev_priv(netdev); > > + struct kvaser_usb *dev = priv->dev; > > + struct net_device_stats *stats = &netdev->stats; > > + struct can_frame *cf = (struct can_frame *)skb->data; > > + struct kvaser_usb_tx_urb_context *context = NULL; > > + struct urb *urb; > > + void *buf; > > + struct kvaser_msg *msg; > > + int i, err; > > + int ret = NETDEV_TX_OK; > > + > > + if (can_dropped_invalid_skb(netdev, skb)) > > + return NETDEV_TX_OK; > > + > > + urb = usb_alloc_urb(0, GFP_ATOMIC); > > + if (!urb) { > > + netdev_err(netdev, "No memory left for URBs\n"); > > + stats->tx_dropped++; > > Move the dev_kfree_skb to the end and goto there. I assume you mean doing something like that at the end of the function: releasebuf: kfree(buf); nobufmem: usb_free_urb(urb); nourbmem: dev_kfree_skb(skb); return ret; If I do that it will give problems when the 'releasebuf' condition is reached. The skb buffer will be freed twice. The skb is already freed by the function can_free_echo_skb(). > > > + dev_kfree_skb(skb); > > + return NETDEV_TX_OK; > > + } > > + > > + buf = kmalloc(sizeof(struct kvaser_msg), GFP_ATOMIC); > > + if (!buf) { > > + netdev_err(netdev, "No memory left for USB buffer\n"); > > + stats->tx_dropped++; > You cann usb_free_urb twice...here and in the error handling at the end. Indeed thanks. > > > + dev_kfree_skb(skb); > > + usb_free_urb(urb); > > + goto nobufmem; > > + } > > + > > + msg = buf; > > + msg->len = MSG_HEADER_LEN + sizeof(struct kvaser_msg_tx_can); > > + msg->u.tx_can.flags = 0; > > + msg->u.tx_can.channel = priv->channel; > > + > > + if (cf->can_id & CAN_EFF_FLAG) { > > + msg->id = CMD_TX_EXT_MESSAGE; > > + msg->u.tx_can.msg[0] = (cf->can_id >> 24) & 0x1f; > > + msg->u.tx_can.msg[1] = (cf->can_id >> 18) & 0x3f; > > + msg->u.tx_can.msg[2] = (cf->can_id >> 14) & 0x0f; > > + msg->u.tx_can.msg[3] = (cf->can_id >> 6) & 0xff; > > + msg->u.tx_can.msg[4] = cf->can_id & 0x3f; > > + } else { > > + msg->id = CMD_TX_STD_MESSAGE; > > + msg->u.tx_can.msg[0] = (cf->can_id >> 6) & 0x1f; > > + msg->u.tx_can.msg[1] = cf->can_id & 0x3f; > > + } > > + > > + msg->u.tx_can.msg[5] = cf->can_dlc; > > + memcpy(&msg->u.tx_can.msg[6], cf->data, cf->can_dlc); > > + > > + if (cf->can_id & CAN_RTR_FLAG) > > + msg->u.tx_can.flags |= MSG_FLAG_REMOTE_FRAME; > > + > > + for (i = 0; i < ARRAY_SIZE(priv->tx_contexts); i++) { > > + if (priv->tx_contexts[i].echo_index == MAX_TX_URBS) { > > + context = &priv->tx_contexts[i]; > > + break; > > + } > > + } > > + > > + if (!context) { > > + netdev_warn(netdev, "cannot find free context\n"); > > + ret = NETDEV_TX_BUSY; > > + goto releasebuf; > > + } > > + > > + context->priv = priv; > > + context->echo_index = i; > > + context->dlc = cf->can_dlc; > > + > > + msg->u.tx_can.tid = context->echo_index; > > + > > + usb_fill_bulk_urb(urb, dev->udev, > > + usb_sndbulkpipe(dev->udev, > > + dev->bulk_out->bEndpointAddress), > > + buf, msg->len, > > + kvaser_usb_write_bulk_callback, context); > > + usb_anchor_urb(urb, &priv->tx_submitted); > > + > > + can_put_echo_skb(skb, netdev, context->echo_index); > > + > > + atomic_inc(&priv->active_tx_urbs); > > + > > + if (atomic_read(&priv->active_tx_urbs) >= MAX_TX_URBS) > > + netif_stop_queue(netdev); > > + > > + err = usb_submit_urb(urb, GFP_ATOMIC); > > + if (unlikely(err)) { > > + can_free_echo_skb(netdev, context->echo_index); > > + > > + atomic_dec(&priv->active_tx_urbs); > > + usb_unanchor_urb(urb); > > + > > + stats->tx_dropped++; > > + > > + if (err == -ENODEV) > > + netif_device_detach(netdev); > > + else > > + netdev_warn(netdev, "Failed tx_urb %d\n", err); > > + > > + goto releasebuf; > > + } > > + > > + usb_free_urb(urb); > > + > > + return NETDEV_TX_OK; > > + > > +releasebuf: > > + kfree(buf); > > +nobufmem: > > + usb_free_urb(urb); > > + return ret; > > +} > > + > > +static const struct net_device_ops kvaser_usb_netdev_ops = { > > + .ndo_open = kvaser_usb_open, > > + .ndo_stop = kvaser_usb_close, > > + .ndo_start_xmit = kvaser_usb_start_xmit, > > +}; > > + > > +static struct can_bittiming_const kvaser_usb_bittiming_const = { > > + .name = "kvaser_usb", > > + .tseg1_min = KVASER_USB_TSEG1_MIN, > > + .tseg1_max = KVASER_USB_TSEG1_MAX, > > + .tseg2_min = KVASER_USB_TSEG2_MIN, > > + .tseg2_max = KVASER_USB_TSEG2_MAX, > > + .sjw_max = KVASER_USB_SJW_MAX, > > + .brp_min = KVASER_USB_BRP_MIN, > > + .brp_max = KVASER_USB_BRP_MAX, > > + .brp_inc = KVASER_USB_BRP_INC, > > +}; > > + > > +static int kvaser_usb_set_bittiming(struct net_device *netdev) > > +{ > > + struct kvaser_usb_net_priv *priv = netdev_priv(netdev); > > + struct can_bittiming *bt = &priv->can.bittiming; > > + struct kvaser_usb *dev = priv->dev; > > + struct kvaser_msg msg = { > > + .id = CMD_SET_BUS_PARAMS, > > + .len = MSG_HEADER_LEN + > > + sizeof(struct kvaser_msg_busparams), > > + .u.busparams.channel = priv->channel, > > + .u.busparams.tid = 0xff, > > + .u.busparams.bitrate = cpu_to_le32(bt->bitrate), > > + .u.busparams.sjw = bt->sjw, > > + .u.busparams.tseg1 = bt->prop_seg + bt->phase_seg1, > > + .u.busparams.tseg2 = bt->phase_seg2, > > + }; > > + > > + if (priv->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES) > > + msg.u.busparams.no_samp = 3; > > + else > > + msg.u.busparams.no_samp = 1; > > + > > + return kvaser_usb_send_msg(dev, &msg); > > +} > > + > > +static int kvaser_usb_set_mode(struct net_device *netdev, > > + enum can_mode mode) > > +{ > > + struct kvaser_usb_net_priv *priv = netdev_priv(netdev); > > + int err; > > + > > + switch (mode) { > > + case CAN_MODE_START: > > + err = kvaser_usb_simple_msg_async(priv, CMD_START_CHIP); > > + if (err) > > + return err; > > + break; > > + default: > > + return -EOPNOTSUPP; > > + } > > + > > + return 0; > > +} > > + > > +static int kvaser_usb_get_berr_counter(const struct net_device *netdev, > > + struct can_berr_counter *bec) > > +{ > > + struct kvaser_usb_net_priv *priv = netdev_priv(netdev); > > + > > + *bec = priv->bec; > > + > > + return 0; > > +} > > + > > +static void kvaser_usb_remove_interfaces(struct kvaser_usb *dev) > > +{ > > + int i; > > + > > + for (i = 0; i < dev->nchannels; i++) { > > + if (!dev->nets[i]) > > + continue; > > + > > + unregister_netdev(dev->nets[i]->netdev); > > + } > > + > > + kvaser_usb_unlink_all_urbs(dev); > > + > > + for (i = 0; i < dev->nchannels; i++) { > > + if (!dev->nets[i]) > > + continue; > > + > > + free_candev(dev->nets[i]->netdev); > > + } > > +} > > + > > +static int kvaser_usb_init_one(struct usb_interface *intf, > > + const struct usb_device_id *id, int channel) > > +{ > > + struct kvaser_usb *dev = usb_get_intfdata(intf); > > + struct net_device *netdev; > > + struct kvaser_usb_net_priv *priv; > > + int i, err; > > + > > + netdev = alloc_candev(sizeof(*priv), MAX_TX_URBS); > > + if (!netdev) { > > + dev_err(&intf->dev, "Cannot alloc candev\n"); > > + return -ENOMEM; > > + } > > + > > + priv = netdev_priv(netdev); > > + > > + init_completion(&priv->start_comp); > > + init_completion(&priv->stop_comp); > > + > > + init_usb_anchor(&priv->tx_submitted); > > + atomic_set(&priv->active_tx_urbs, 0); > > + > > + for (i = 0; i < ARRAY_SIZE(priv->tx_contexts); i++) > > + priv->tx_contexts[i].echo_index = MAX_TX_URBS; > > + > > + priv->dev = dev; > > + priv->netdev = netdev; > > + priv->channel = channel; > > + > > + priv->can.state = CAN_STATE_STOPPED; > > + priv->can.clock.freq = CAN_USB_CLOCK; > > + priv->can.bittiming_const = &kvaser_usb_bittiming_const; > > + priv->can.do_set_bittiming = kvaser_usb_set_bittiming; > > + priv->can.do_set_mode = kvaser_usb_set_mode; > > + if (id->driver_info & KVASER_HAS_TXRX_ERRORS) > > + priv->can.do_get_berr_counter = kvaser_usb_get_berr_counter; > > + priv->can.ctrlmode_supported = CAN_CTRLMODE_3_SAMPLES; > > + if (id->driver_info & KVASER_HAS_SILENT_MODE) > > + priv->can.ctrlmode_supported |= CAN_CTRLMODE_LISTENONLY; > > + > > + netdev->flags |= IFF_ECHO; > > + > > + netdev->netdev_ops = &kvaser_usb_netdev_ops; > > + > > + SET_NETDEV_DEV(netdev, &intf->dev); > > + > > + dev->nets[channel] = priv; > > + > > + err = register_candev(netdev); > > + if (err) { > > + dev_err(&intf->dev, "Failed to register can device\n"); > > + free_candev(netdev); > > + dev->nets[channel] = NULL; > > + return err; > > + } > > + > > + netdev_dbg(netdev, "device registered\n"); > > + > > + return 0; > > +} > > + > > +static void kvaser_usb_get_endpoints(const struct usb_interface *intf, > > + struct usb_endpoint_descriptor **in, > > + struct usb_endpoint_descriptor **out) > > +{ > > + const struct usb_host_interface *iface_desc; > > + struct usb_endpoint_descriptor *endpoint; > > + int i; > > + > > + iface_desc = &intf->altsetting[0]; > > + > > + for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { > > + endpoint = &iface_desc->endpoint[i].desc; > > + > > + if (usb_endpoint_is_bulk_in(endpoint)) > > + *in = endpoint; > > + > > + if (usb_endpoint_is_bulk_out(endpoint)) > > + *out = endpoint; > > + } > > +} > > + > > +static int kvaser_usb_probe(struct usb_interface *intf, > > + const struct usb_device_id *id) > > +{ > > + struct kvaser_usb *dev; > > + int err = -ENOMEM; > > + int i; > > + > > + dev = devm_kzalloc(&intf->dev, sizeof(*dev), GFP_KERNEL); > > + if (!dev) > > + return -ENOMEM; > > + > > + kvaser_usb_get_endpoints(intf, &dev->bulk_in, &dev->bulk_out); > > + if (!dev->bulk_in || !dev->bulk_out) { > > + dev_err(&intf->dev, "Cannot get usb endpoint(s)"); > > + return err; > > + } > > + > > + dev->udev = interface_to_usbdev(intf); > > + > > + init_usb_anchor(&dev->rx_submitted); > > + > > + usb_set_intfdata(intf, dev); > > + > > + for (i = 0; i < MAX_NET_DEVICES; i++) > > + kvaser_usb_send_simple_msg(dev, CMD_RESET_CHIP, i); > > + > > + err = kvaser_usb_get_software_info(dev); > > + if (err) { > > + dev_err(&intf->dev, > > + "Cannot get software infos, error %d\n", err); > > + return err; > > + } > > + > > + err = kvaser_usb_get_card_info(dev); > > + if (err) { > > + dev_err(&intf->dev, > > + "Cannot get card infos, error %d\n", err); > > + return err; > > + } > > + > > + dev_dbg(&intf->dev, "Firmware version: %d.%d.%d\n", > > + ((dev->fw_version >> 24) & 0xff), > > + ((dev->fw_version >> 16) & 0xff), > > + (dev->fw_version & 0xffff)); > > + > > + for (i = 0; i < dev->nchannels; i++) { > > + err = kvaser_usb_init_one(intf, id, i); > > + if (err) { > > + kvaser_usb_remove_interfaces(dev); > > + return err; > > + } > > + } > > + > > + return 0; > > +} > > + > > +static void kvaser_usb_disconnect(struct usb_interface *intf) > > +{ > > + struct kvaser_usb *dev = usb_get_intfdata(intf); > > + > > + usb_set_intfdata(intf, NULL); > > + > > + if (!dev) > > + return; > > + > > + kvaser_usb_remove_interfaces(dev); > > +} > > + > > +static struct usb_driver kvaser_usb_driver = { > > + .name = "kvaser_usb", > > + .probe = kvaser_usb_probe, > > + .disconnect = kvaser_usb_disconnect, > > + .id_table = kvaser_usb_table > ^^^ > nitpick, please add a "," there. Ok. > > +}; > > > can you please add MODULE_DEVICE_TABLE(usb, kvaser_usb_table); It is already present just after the kvaser_usb_table structure. > > > +module_usb_driver(kvaser_usb_driver); > > + > > +MODULE_AUTHOR("Olivier Sobrie <oliv...@sobrie.be>"); > > +MODULE_DESCRIPTION("CAN driver for Kvaser CAN/USB devices"); > > +MODULE_LICENSE("GPL v2"); > > > > Marc > -- > Pengutronix e.K. | Marc Kleine-Budde | > Industrial Linux Solutions | Phone: +49-231-2826-924 | > Vertretung West/Dortmund | Fax: +49-5121-206917-5555 | > Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de | > Thank you, -- Olivier -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
