The implementation is derived from the fsl_udc_core code in
fsl_ep_enable and makes basic iso handling possible.
Signed-off-by: Michael Grzeschik <m.grzesc...@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <m...@pengutronix.de>
---
drivers/usb/chipidea/udc.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index 2999b0d..0bc4308 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -1058,6 +1058,9 @@ static int ep_enable(struct usb_ep *ep,
int retval = 0;
unsigned long flags;
+ unsigned short max = 0;
+ unsigned char mult = 0;
+
if (ep == NULL || desc == NULL)
return -EINVAL;
@@ -1075,6 +1078,7 @@ static int ep_enable(struct usb_ep *ep,
mEp->type = usb_endpoint_type(desc);
mEp->ep.maxpacket = usb_endpoint_maxp(desc);
+ max = usb_endpoint_maxp(desc);
dbg_event(_usb_addr(mEp), "ENABLE", 0);
@@ -1082,8 +1086,12 @@ static int ep_enable(struct usb_ep *ep,
if (mEp->type == USB_ENDPOINT_XFER_CONTROL)
mEp->qh.ptr->cap |= QH_IOS;
- else if (mEp->type == USB_ENDPOINT_XFER_ISOC)
- mEp->qh.ptr->cap &= ~QH_MULT;
+ else if (mEp->type == USB_ENDPOINT_XFER_ISOC) {
+ /* Calculate transactions needed for high bandwidth iso */
+ mult = (unsigned char)(1 + ((max >> 11) & 0x03));
+ max = max & 0x7ff; /* bit 0~10 */
+ mEp->qh.ptr->cap |= (mult << 30);
+ }
else
mEp->qh.ptr->cap &= ~QH_ZLT;
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
