At commit 925aa46ba963a4da6d8ee6ab1d04a02ffa8db62b, Richard Zhao <richard.z...@freescale.com> adds the phy notification callback when port change occurs. In fact, this phy notification should be added according to below rules:
1. Only set HW_USBPHY_CTRL.ENHOSTDISCONDETECT during high speed host mode. 2. Do not set HW_USBPHY_CTRL.ENHOSTDISCONDETECT during the reset and speed negotiation period. 3. Do not set HW_USBPHY_CTRL.ENHOSTDISCONDETECT during host suspend/resume sequence. Please refer: i.mx23RM(page: 413) for below rules. http://www.freescale.com/files/dsp/doc/ref_manual/IMX23RM.pdf Freescale i.MX SoC, i.mx23, i.mx28 and i.mx6(i.mx6SL does not need to follow the 3rd rule) need to follow above rules. Current code set connect notification (HW_USBPHY_CTRL.ENHOSTDISCONDETECT) at hub_port_connect_change, it conflicts with above the 2th rule. The correct notification setting method should be: 1. Set connect notify after the second bus reset. 2. Set disconnect notify after disconnection. Signed-off-by: Peter Chen <peter.c...@freescale.com> Tested-by: Mike Thompson <mpthomp...@gmail.com> Acked-by: Alan Stern <st...@rowland.harvard.edu> --- drivers/usb/core/hub.c | 16 ++++++++-------- 1 files changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 673ee46..ced5e7b 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -3959,6 +3959,9 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, if (retval) goto fail; + if (hcd->phy && !hdev->parent) + usb_phy_notify_connect(hcd->phy, port1); + /* * Some superspeed devices have finished the link training process * and attached to a superspeed hub port, but the device descriptor @@ -4153,8 +4156,12 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, } /* Disconnect any existing devices under this port */ - if (udev) + if (udev) { + if (hcd->phy && !hdev->parent && + !(portstatus & USB_PORT_STAT_CONNECTION)) + usb_phy_notify_disconnect(hcd->phy, port1); usb_disconnect(&hub->ports[port1 - 1]->child); + } clear_bit(port1, hub->change_bits); /* We can forget about a "removed" device when there's a physical @@ -4177,13 +4184,6 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, } } - if (hcd->phy && !hdev->parent) { - if (portstatus & USB_PORT_STAT_CONNECTION) - usb_phy_notify_connect(hcd->phy, port1); - else - usb_phy_notify_disconnect(hcd->phy, port1); - } - /* Return now if debouncing failed or nothing is connected or * the device was "removed". */ -- 1.7.0.4 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
