Hi, Thanks for the reply. Right now I am working kernel 3.5. I want to connect USB to Serial device (FDTI FT232R base) and be able to use /dev/ttyUSB. (I can mknod manualy). In fact I am going to connect hub, and I will need up to 4 serial ports.
I used make menuconfig - and I marked all the required item, but how I intialize instance of USB serial port driver? I think it require some definition in the .dts file. BTW, I am going to use complete kernel build (no dynamic module loading) I hope I am more clear now Thanks Avner ________________________________________ From: Greg KH [gre...@linuxfoundation.org] Sent: Thursday, October 25, 2012 7:19 PM To: Avner Flesch Cc: linux-usb@vger.kernel.org Subject: Re: PPC Serial over Host USB On Thu, Oct 25, 2012 at 04:42:09PM +0000, Avner Flesch wrote: > Hi, > > I have Freescale's MPC8308RDB board, and I would like to activate the USB as > host and use it as Serial port. How do you want to use it as a serial port? In what manner? > I think I configured the kernel properly, and I would like the drivers to be > initialized (not hot module load) What do you mean by this? > I believe that should be in the .dts file. > I don't want to dive into USB - I just need the serial port over USB. In what way? What kernel version are you using? greg k-h -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
