Hi Tony,
On Saturday 20 October 2012 16:17:32 Tony Prisk wrote:
> This patch adds devicetree support to the EHCI-platform driver,
> and removes the now unneeded ehci-vt8500.c
>
> Existing platform properties are maintained, with the exception
> the power_(on/off) and suspend function pointers.
Ok, so I have recently sent a bit patchset to remove most OHCI/EHCI drivers
that could be converted to the generic variants, series starts here:
1349701906-16481-1-git-send-email-flor...@openwrt.org
in this patchset I added a new property to the EHCI platform data:
need_io_watchdog, which needs to be handled too from DT ideally.
Adding device tree bindings is on my TODO after having a generic way
to pass clocks to the ehci/ohci platform drivers, so you are right on time :)
[snip]
> + if (np) {
> + /*
> + * No platform data is being passed, so initalize pdata.
> + * Limitation: we can't support power_on, power_off or
> + * power_suspend function pointers from DT.
> + * TODO: The missing functions could be replaced with
> + * power sequence handlers.
> + */
> + pdata = devm_kzalloc(&dev->dev, sizeof(*pdata), GFP_KERNEL);
Missing allocation failure handling here. And you should free this in
ehci_platform_remove() accordingly.
> + dev->dev.platform_data = pdata;
> +
> + /* Read the optional properties from DT node */
> + of_property_read_u32(np, "caps-offset", &pdata->caps_offset);
> + if (of_property_read_bool(np, "has-tt"))
> + pdata->has_tt = 1;
> + if (of_property_read_bool(np, "has-synopsys-hc-bug"))
> + pdata->has_synopsys_hc_bug = 1;
> + if (of_property_read_bool(np, "big-endian-desc"))
> + pdata->big_endian_desc = 1;
> + if (of_property_read_bool(np, "big-endian-mmio"))
> + pdata->big_endian_mmio = 1;
I would rather we remain compatible with ehci-ppc-of, by handling the
big-endian property you set big_endian_mmiod and big_endian_desc to 1, and
by setting them individually, you get what you expect.
> +
> + /* Right now device-tree probed devices don't get dma_mask set.
> + * Since shared usb code relies on it, set it here for now.
> + * Once we have dma capability bindings this can go away.
> + */
> + if (!dev->dev.dma_mask)
> + dev->dev.dma_mask = &ehci_dma_mask;
> + }
> +
> if (!pdata) {
> WARN_ON(1);
> return -ENODEV;
> @@ -215,6 +250,16 @@ static const struct platform_device_id
> ehci_platform_table[] = {
> { "ehci-platform", 0 },
> { }
> };
> +
> +#ifdef CONFIG_OF
> +static const struct of_device_id ehci_platform_ids[] = {
> + { .compatible = "ehci-platform", },
> + {}
ehci-platform is very linux-specific, so this should either be:
"linux,ehci-platform", or "usb-ehci", pretty much like the ppc-of ehci driver.
--
Florian
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
