On Tue, 16 Oct 2012, Peter Chen wrote:
> > --- usb-3.6.orig/drivers/usb/core/hcd.c
> > +++ usb-3.6/drivers/usb/core/hcd.c
> > @@ -2023,6 +2023,7 @@ int hcd_bus_resume(struct usb_device *rh
> > struct usb_hcd *hcd = container_of(rhdev->bus, struct usb_hcd, self);
> > int status;
> > int old_state = hcd->state;
> > + int port1;
> >
> > dev_dbg(&rhdev->dev, "usb %sresume\n",
> > (PMSG_IS_AUTO(msg) ? "auto-" : ""));
> > @@ -2039,8 +2040,6 @@ int hcd_bus_resume(struct usb_device *rh
> > status = hcd->driver->bus_resume(hcd);
> > clear_bit(HCD_FLAG_WAKEUP_PENDING, &hcd->flags);
> > if (status == 0) {
> > - /* TRSMRCY = 10 msec */
> > - msleep(10);
> > spin_lock_irq(&hcd_root_hub_lock);
> > if (!HCD_DEAD(hcd)) {
> > usb_set_device_state(rhdev, rhdev->actconfig
> > @@ -2050,6 +2049,22 @@ int hcd_bus_resume(struct usb_device *rh
> > hcd->state = HC_STATE_RUNNING;
> > }
> > spin_unlock_irq(&hcd_root_hub_lock);
> > +
> > + /* Any enabled non-suspended port requires TRSMRCY delay */
> > + for (port1 = 1; port1 <= rhdev->maxchild; ++port1) {
> > + __le16 buf[2];
> > + unsigned pstatus;
> > +
> > + buf[0] = 0;
> > + hcd->driver->hub_control(hcd, USB_DIR_IN | USB_RT_PORT,
> > + 0, port1, (char *) buf, 4);
> > + pstatus = le16_to_cpu(buf[0]);
> > + if ((pstatus & USB_PORT_STAT_ENABLE) &&
> > + !(pstatus & USB_PORT_STAT_SUSPEND)) {
> > + msleep(10); /* TRSMRCY */
> > + break;
> > + }
> > + }
> > } else {
> > hcd->state = old_state;
> > dev_dbg(&rhdev->dev, "bus %s fail, err %d\n",
> >
> > I haven't tested this, just compiled it.
> I have tested it at Freescale i.mx6Q sabrelite board, your patch is ok.
> Will you post a patch or I do it for you?
I will submit it.
Alan Stern
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
