Make sure hardware buffers are empty before returning 0.

This fixes a problem reported by Jarkko Huijts who noted that port close
returns before all data has been transferred.

Based on a solution proposed by Jarkko Huijts.

Reported-by: Jarkko Huijts <jarkko.hui...@gmail.com>
Signed-off-by: Johan Hovold <jhov...@gmail.com>
---
 drivers/usb/serial/ftdi_sio.c | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 3312d7a..03bf6d2 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -921,6 +921,7 @@ static void ftdi_set_termios(struct tty_struct *tty,
 static int  ftdi_tiocmget(struct tty_struct *tty);
 static int  ftdi_tiocmset(struct tty_struct *tty,
                        unsigned int set, unsigned int clear);
+static int ftdi_chars_in_buffer(struct tty_struct *tty);
 static int ftdi_get_icount(struct tty_struct *tty,
                           struct serial_icounter_struct *icount);
 static int  ftdi_ioctl(struct tty_struct *tty,
@@ -950,6 +951,7 @@ static struct usb_serial_driver ftdi_sio_device = {
        .open =                 ftdi_open,
        .close =                ftdi_close,
        .dtr_rts =              ftdi_dtr_rts,
+       .chars_in_buffer =      ftdi_chars_in_buffer,
        .throttle =             usb_serial_generic_throttle,
        .unthrottle =           usb_serial_generic_unthrottle,
        .process_read_urb =     ftdi_process_read_urb,
@@ -2371,6 +2373,29 @@ static int ftdi_tiocmset(struct tty_struct *tty,
        return update_mctrl(port, set, clear);
 }
 
+static int ftdi_chars_in_buffer(struct tty_struct *tty)
+{
+       struct usb_serial_port *port = tty->driver_data;
+       unsigned char buf[2];
+       int count;
+       int ret;
+
+       count = usb_serial_generic_chars_in_buffer(tty);
+       if (count)
+               goto out;
+
+       /* Check if hardware buffer is empty. */
+       ret = ftdi_get_modem_status(tty, buf);
+       if (ret == 2) {
+               if (!(buf[1] & FTDI_RS_TEMT))
+                       count = 1;
+       }
+out:
+       dev_dbg(&port->dev, "%s - %d\n", __func__, count);
+
+       return count;
+}
+
 static int ftdi_get_icount(struct tty_struct *tty,
                                struct serial_icounter_struct *icount)
 {
-- 
1.7.12

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to