Hi Alan > > On Wed, 1 Aug 2012, Ravi Babu wrote: > > > When the scsi mass storage device is disconnected, the current urbs > > queued to hcd driver must be cancelled, otherwise the > current urbs are > > pending at hcd driver and the active urb programmed at host > controller > > will never be completed. The class driver shall dequeue or > cancel all > > the urb request submitted to hcd once the device is > disconnected and > > no longer exits. > > > > Signed-off-by: Ravi Babu <ravib...@ti.com> > > --- > > drivers/usb/storage/usb.c | 2 ++ > > 1 files changed, 2 insertions(+), 0 deletions(-) > > > > diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c > > index e23c30a..a313af6 100644 > > --- a/drivers/usb/storage/usb.c > > +++ b/drivers/usb/storage/usb.c > > @@ -844,6 +844,8 @@ static void > quiesce_and_remove_host(struct us_data *us) > > */ > > scsi_lock(host); > > set_bit(US_FLIDX_DISCONNECTING, &us->dflags); > > + /* stop the current urbs when the device got disconnected */ > > + usb_stor_stop_transport(us); > > This shouldn't be necessary. This code runs after > scsi_remove_host() returns, so there should not be any URBs > running at this point. > > Have you actually encountered a problem that this patch fixes?
In specific condition, where the transmit request is in progress and device is unplugged from host, found that this current tx request is not dequeued/unlinked during disconnect. Ravi > > Alan Stern > > -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
