Hi,
On Wed, Jul 18, 2012 at 06:29:06PM +0800, Richard Zhao wrote:
> i.MX usb controllers shares non-core registers, which may include
> SoC specific controls. We take it as a usbmisc device and usbmisc
> driver set operations needed by ci13xxx_imx driver.
>
> For example, Sabrelite board has bad over-current design, we can
> usbmisc to disable over-current detect.
>
> Signed-off-by: Richard Zhao <richard.z...@freescale.com>
> ---
> .../devicetree/bindings/usb/ci13xxx-imx.txt | 2 +
> .../devicetree/bindings/usb/usbmisc-imx.txt | 12 ++
> drivers/usb/chipidea/Makefile | 2 +-
> drivers/usb/chipidea/ci13xxx_imx.c | 23 +++
> drivers/usb/chipidea/usbmisc_imx6q.c | 161
> ++++++++++++++++++++
> 5 files changed, 199 insertions(+), 1 deletion(-)
> create mode 100644 Documentation/devicetree/bindings/usb/usbmisc-imx.txt
> create mode 100644 drivers/usb/chipidea/usbmisc_imx6q.c
>
> diff --git a/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
> b/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
> index 2c29041..06105ce 100644
> --- a/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
> +++ b/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
> @@ -8,6 +8,7 @@ Required properties:
> Optional properties:
> - fsl,usbphy: phandler of usb phy that connects to the only one port
> - vbus-supply: regulator for vbus
> +- disable-over-current: disable over current detect
>
> Examples:
> usb@02184000 { /* USB OTG */
> @@ -15,4 +16,5 @@ usb@02184000 { /* USB OTG */
> reg = <0x02184000 0x200>;
> interrupts = <0 43 0x04>;
> fsl,usbphy = <&usbphy1>;
> + disable-over-current;
> };
> diff --git a/Documentation/devicetree/bindings/usb/usbmisc-imx.txt
> b/Documentation/devicetree/bindings/usb/usbmisc-imx.txt
> new file mode 100644
> index 0000000..4fa500d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/usbmisc-imx.txt
> @@ -0,0 +1,12 @@
> +* Freescale i.MX non-core registers
> +
> +Required properties:
> +- compatible: Should be one of below:
> + "fsl,imx6q-usbmisc" for imx6q
> +- reg: Should contain registers location and length
> +
> +Examples:
> +usbmisc@02184800 {
> + compatible = "fsl,imx6q-usbmisc";
> + reg = <0x02184800 0x200>;
> +};
> diff --git a/drivers/usb/chipidea/Makefile b/drivers/usb/chipidea/Makefile
> index 5c66d9c..57e510f 100644
> --- a/drivers/usb/chipidea/Makefile
> +++ b/drivers/usb/chipidea/Makefile
> @@ -15,5 +15,5 @@ ifneq ($(CONFIG_PCI),)
> endif
>
> ifneq ($(CONFIG_OF_DEVICE),)
> - obj-$(CONFIG_USB_CHIPIDEA) += ci13xxx_imx.o
> + obj-$(CONFIG_USB_CHIPIDEA) += ci13xxx_imx.o usbmisc_imx6q.o
> endif
> diff --git a/drivers/usb/chipidea/ci13xxx_imx.c
> b/drivers/usb/chipidea/ci13xxx_imx.c
> index ef60d06..e790c0e 100644
> --- a/drivers/usb/chipidea/ci13xxx_imx.c
> +++ b/drivers/usb/chipidea/ci13xxx_imx.c
> @@ -22,6 +22,7 @@
> #include <linux/regulator/consumer.h>
>
> #include "ci.h"
> +#include "ci13xxx_imx.h"
>
> #define pdev_to_phy(pdev) \
> ((struct usb_phy *)platform_get_drvdata(pdev))
> @@ -34,6 +35,25 @@ struct ci13xxx_imx_data {
> struct regulator *reg_vbus;
> };
>
> +static const struct usbmisc_ops *usbmisc_ops;
> +
> +int usbmisc_set_ops(const struct usbmisc_ops *ops)
> +{
> + if (usbmisc_ops)
> + return -EBUSY;
> +
> + usbmisc_ops = ops;
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(usbmisc_set_ops);
> +
> +void usbmisc_unset_ops(const struct usbmisc_ops *ops)
> +{
> + usbmisc_ops = NULL;
> +}
> +EXPORT_SYMBOL_GPL(usbmisc_unset_ops);
> +
> static struct ci13xxx_platform_data ci13xxx_imx_platdata __devinitdata = {
> .name = "ci13xxx_imx",
> .flags = CI13XXX_REQUIRE_TRANSCEIVER |
> @@ -120,6 +140,9 @@ static int __devinit ci13xxx_imx_probe(struct
> platform_device *pdev)
> *pdev->dev.dma_mask = DMA_BIT_MASK(32);
> dma_set_coherent_mask(&pdev->dev, *pdev->dev.dma_mask);
> }
> +
> + usbmisc_ops->init(&pdev->dev);
> +
> plat_ci = ci13xxx_add_device(&pdev->dev,
> pdev->resource, pdev->num_resources,
> &ci13xxx_imx_platdata);
> diff --git a/drivers/usb/chipidea/usbmisc_imx6q.c
> b/drivers/usb/chipidea/usbmisc_imx6q.c
> new file mode 100644
> index 0000000..9f69a8c
> --- /dev/null
> +++ b/drivers/usb/chipidea/usbmisc_imx6q.c
> @@ -0,0 +1,161 @@
> +/*
> + * Copyright 2012 Freescale Semiconductor, Inc.
> + *
> + * The code contained herein is licensed under the GNU General Public
> + * License. You may obtain a copy of the GNU General Public License
> + * Version 2 or later at the following locations:
> + *
> + * http://www.opensource.org/licenses/gpl-license.html
> + * http://www.gnu.org/copyleft/gpl.html
> + */
> +
> +#include <linux/module.h>
> +#include <linux/of_platform.h>
> +#include <linux/clk.h>
> +#include <linux/err.h>
> +#include <linux/io.h>
> +
> +#include "ci13xxx_imx.h"
> +
> +#define USB_DEV_MAX 4
> +
> +#define BM_OVER_CUR_DIS BIT(7)
> +
> +struct imx6q_usbmisc {
> + void __iomem *base;
> + struct clk *clk;
> + struct device *usb_dev[USB_DEV_MAX];
> + spinlock_t lock;
> +
> + int disable_oc:USB_DEV_MAX;
> +};
> +
> +static struct imx6q_usbmisc *usbmisc;
> +
> +static int get_index(struct device *dev)
> +{
> + int i, id = -1;
> +
> + for (i = 0; i < USB_DEV_MAX; i ++) {
> + if (usbmisc->usb_dev[i] == dev) {
> + id = i;
> + break;
> + }
> + }
> +
> + if (id != -1)
> + return id;
> +
> + id = of_alias_get_id(dev->of_node, "usb");
> + if (id < 0)
> + dev_err(dev, "failed to get alias id, errno %d\n", id);
> + return id;
> +}
> +
> +static int usbmisc_imx6q_init(struct device *usb_dev)
> +{
> +
> + int id;
> + u32 reg;
> + struct device_node *usb_np;
> + unsigned long flags;
> +
> + id = get_index(usb_dev);
> + if (id < 0)
> + return id;
> +
> + usb_np = usb_dev->of_node;
> + if (of_find_property(usb_np, "disable-over-current", NULL)) {
> + spin_lock_irqsave(&usbmisc->lock, flags);
> + usbmisc->disable_oc |= BIT(id);
> + reg = readl(usbmisc->base + id * 4);
> + writel(reg | BM_OVER_CUR_DIS, usbmisc->base + id * 4);
> + spin_unlock_irqrestore(&usbmisc->lock, flags);
> + }
> +
> + return 0;
> +}
> +
> +static const struct usbmisc_ops imx6q_usbmisc_ops = {
> + .init = usbmisc_imx6q_init,
> +};
> +
> +static const struct of_device_id usbmisc_imx6q_dt_ids[] = {
> + { .compatible = "fsl,imx6q-usbmisc"},
> + { /* sentinel */ }
> +};
> +
> +static int __devinit usbmisc_imx6q_probe(struct platform_device *pdev)
> +{
> + struct resource *res;
> + struct imx6q_usbmisc *data;
> + int ret;
> +
> + if (usbmisc)
> + return -EBUSY;
> +
> + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
> + if (!data)
> + return -ENOMEM;
> +
> + spin_lock_init(&data->lock);
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + data->base = devm_request_and_ioremap(&pdev->dev, res);
> + if (!data->base)
> + return -EADDRNOTAVAIL;
> +
> + data->clk = devm_clk_get(&pdev->dev, NULL);
> + if (IS_ERR(data->clk)) {
> + dev_err(&pdev->dev,
> + "failed to get clock, err=%ld\n", PTR_ERR(data->clk));
> + return PTR_ERR(data->clk);
> + }
> +
> + ret = clk_prepare_enable(data->clk);
> + if (ret) {
> + dev_err(&pdev->dev,
> + "clk_prepare_enable failed, err=%d\n", ret);
> + return ret;
> + }
> +
> + ret = usbmisc_set_ops(&imx6q_usbmisc_ops);
> + if (ret)
> + return ret;
> +
> + usbmisc = data;
> +
> + return 0;
> +}
> +
> +static int __devexit usbmisc_imx6q_remove(struct platform_device *pdev)
> +{
> + usbmisc_unset_ops(&imx6q_usbmisc_ops);
> + clk_disable_unprepare(usbmisc->clk);
> + return 0;
> +}
> +
> +static struct platform_driver usbmisc_imx6q_driver = {
> + .probe = usbmisc_imx6q_probe,
> + .remove = __devexit_p(usbmisc_imx6q_remove),
> + .driver = {
> + .name = "usbmisc_imx6q",
> + .owner = THIS_MODULE,
> + .of_match_table = usbmisc_imx6q_dt_ids,
> + },
> +};
> +
> +static int __init usbmisc_imx6q_drv_init(void)
> +{
> + return platform_driver_register(&usbmisc_imx6q_driver);
> +}
> +subsys_initcall(usbmisc_imx6q_drv_init);
> +
> +static void __exit usbmisc_imx6q_drv_exit(void)
> +{
> + platform_driver_unregister(&usbmisc_imx6q_driver);
> +}
> +module_exit(usbmisc_imx6q_drv_exit);
> +MODULE_ALIAS("platform:usbmisc-imx6q"); MODULE_LICENSE("GPL v2");
> +MODULE_DESCRIPTION("i.MX6Q non-core usb register handling");
> +MODULE_AUTHOR("Richard Zhao <richard.z...@freescale.com>");This patch looks like a recipe for disaster IMHO, but it's Alex's call. -- balbi
signature.asc
Description: Digital signature
