On Sun, 8 Jul 2012, Kevin Cernekee wrote: > usb_gadget_remove_driver() runs through a four-step sequence to shut down > the gadget driver. For the case of a composite gadget + at91 UDC, this > would look like: > > udc->driver->disconnect(udc->gadget); // composite_disconnect() > usb_gadget_disconnect(udc->gadget); // at91_pullup(gadget, 0) > udc->driver->unbind(udc->gadget); // composite_unbind() > usb_gadget_udc_stop(udc->gadget, udc->driver); // at91_stop() > > composite_disconnect() says: > > if (cdev->config) > reset_config(cdev); > > reset_config() sets cdev->config to NULL. composite_unbind() later tests > for this: > > WARN_ON(cdev->config); > > But SETUP packets may be sent to the composite driver up until the point > when usb_gadget_disconnect() returns.
That doesn't sound right. A host can't send SETUP packets to a disconnected port. The packets should stop arriving when udc->driver->disconnect returns -- assuming the UDC driver implements a disconnect method. Alan Stern -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
