On Tuesday 19 February 2008, Andre Tomt wrote: > > > Can you try this diagnostic patch, to see if it reports any messages > > about IAA and/or IAAD oddities? There's surely a quick workaround > > for this, but I'd rather understand the root cause before patching. > > Doesn't seem to have triggered anything. dmesg attached in case I missed > anything.
You don't seem to have enabled CONFIG_USB_DEBUG, as the patch instructions say is needed to get such diagnostics ... I can tell because the startup messages from USB are pretty minimal. (See appended, vs what you sent...) Please try again with USB debugging enabled. - Dave ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3 ehci_hcd 0000:00:02.2: reset hcs_params 0x102486 dbg=1 cc=2 pcc=4 !ppc ports=6 ehci_hcd 0000:00:02.2: reset portroute 0 0 1 1 1 0 ehci_hcd 0000:00:02.2: reset hcc_params a086 caching frame 256/512/1024 park ehci_hcd 0000:00:02.2: park 0 ehci_hcd 0000:00:02.2: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT PCI: cache line size of 64 is not supported by device 0000:00:02.2 ehci_hcd 0000:00:02.2: supports USB remote wakeup ehci_hcd 0000:00:02.2: irq 22, io mem 0xe8004000 ehci_hcd 0000:00:02.2: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT ehci_hcd 0000:00:02.2: init command 010009 (park)=0 ithresh=1 period=256 RUN ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 ... - To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
