Matt, You hit it on the first try! Everything works if I manually load sd_mod.
Should sd_mod be loading automatically? Or should I add it to /etc/modules? Currently I'm only autoloading ohci-hcd and everything else USB needs seems to be pulled in as needed. Thanks! Steve On Sat, 2007-12-22 at 00:05 -0800, Matthew Dharm wrote: > Is sd_mod getting loaded? What happens if you load it manually? > > Matt > > On Fri, Dec 21, 2007 at 11:51:42PM -0800, Steve Sakoman wrote: > > I'm working on an OpenEmbedded port for gumstix modules (PXA270 based) > > and running into an issue with USB storage devices. > > > > I am using a 2.6.21 kernel and udev-115. > > > > Other devices seem to work fine: USB keyboards, Bluetooth dongles, etc. > > > > However when I insert a USB storage device the mount process doesn't > > quite complete: > > > > <6>usb 1-2.3: new full speed USB device using pxa27x-ohci and address 6 > > <6>usb 1-2.3: configuration #1 chosen from 1 choice > > <6>scsi2 : SCSI emulation for USB Mass Storage devices > > <7>usb-storage: device found at 6 > > <7>usb-storage: waiting for device to settle before scanning > > <5>scsi 2:0:0:0: Direct-Access USB 2.0 Flash Drive 0.00 PQ: 0 > > ANSI: 2 > > <7>usb-storage: device scan complete > > > > And nothing further--the expected sda device is never created. > > > > This is new territory for me. Any advice on where I should begin > > looking? Is this a udev thing? > > > > Thanks! > > > > Steve > > > > > > - > > To unsubscribe from this list: send the line "unsubscribe linux-usb" in > > the body of a message to [EMAIL PROTECTED] > > More majordomo info at http://vger.kernel.org/majordomo-info.html > - To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
