In default it showed rtn in decimal. kworker/3:1H-183 [003] .... 51.035474: scsi_dispatch_cmd_error: host_no=0 channel=0 id=0 lun=4 data_sgl=1 prot_sgl=0 prot_op=SCSI_PROT_NORMAL cmnd=(READ_10 lba=3907214 txlen=1 protect=0 raw=28 00 00 3b 9e 8e 00 00 01 00) rtn=4181
In source code we define these possible value as hexadecimal: include/scsi/scsi.h SCSI_MLQUEUE_HOST_BUSY 0x1055 SCSI_MLQUEUE_DEVICE_BUSY 0x1056 SCSI_MLQUEUE_EH_RETRY 0x1057 SCSI_MLQUEUE_TARGET_BUSY 0x1058 This change shows the string type. Signed-off-by: Kassey Li <[email protected]> --- include/trace/events/scsi.h | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/include/trace/events/scsi.h b/include/trace/events/scsi.h index bf6cc98d9122..56987f98ba4a 100644 --- a/include/trace/events/scsi.h +++ b/include/trace/events/scsi.h @@ -240,14 +240,18 @@ TRACE_EVENT(scsi_dispatch_cmd_error, TP_printk("host_no=%u channel=%u id=%u lun=%u data_sgl=%u prot_sgl=%u" \ " prot_op=%s driver_tag=%d scheduler_tag=%d cmnd=(%s %s raw=%s)" \ - " rtn=%d", + " rtn=%s", __entry->host_no, __entry->channel, __entry->id, __entry->lun, __entry->data_sglen, __entry->prot_sglen, show_prot_op_name(__entry->prot_op), __entry->driver_tag, __entry->scheduler_tag, show_opcode_name(__entry->opcode), __parse_cdb(__get_dynamic_array(cmnd), __entry->cmd_len), __print_hex(__get_dynamic_array(cmnd), __entry->cmd_len), - __entry->rtn) + __print_symbolic(rtn, { SCSI_MLQUEUE_HOST_BUSY, "HOST_BUSY" }, + { SCSI_MLQUEUE_DEVICE_BUSY, "DEVICE_BUSY" }, + { SCSI_MLQUEUE_EH_RETRY, "EH_RETRY" }, + { SCSI_MLQUEUE_TARGET_BUSY, "TARGET_BUSY" }) + ) ); DECLARE_EVENT_CLASS(scsi_cmd_done_timeout_template, -- 2.34.1
