Am 16.12.24 um 11:38 schrieb Joshua Grisham:
Adds a new driver for Samsung Galaxy Book series notebook devices. This
includes the driver itself, a tracepoint header file, a new page in the
documentation, and relevant updates to Kconfig, Makefile, and MAINTAINERS
files related to this new driver.
Can you make sure that scripts/checkpatch --strict find no more complaints in
the next patch
revision? Currently it finds 1 warning and 16 checks.
Signed-off-by: Joshua Grisham <j...@joshuagrisham.com>
---
v1->v2:
- Attempt to resolve all review comments from v1 as written here:
https://lore.kernel.org/platform-driver-x86/53c5075b-1967-45d0-937f-463912dd9...@gmx.de/T/#mbcbd8d5d9bc4496bac5486636c7d3b32bc3e5cd0
v2->v3:
- Tweak to battery attribute to closer match pattern in dell-wmi-ddv
- implement platform_profile_remove() change from
9b3bb37b44a317626464e79da8b39989b421963f
- Small tweak to Documentation page
---
.../laptops/samsung-galaxybook.rst | 280 ++++
MAINTAINERS | 8 +
drivers/platform/x86/Kconfig | 18 +
drivers/platform/x86/Makefile | 5 +-
.../platform/x86/samsung-galaxybook-trace.h | 51 +
drivers/platform/x86/samsung-galaxybook.c | 1380 +++++++++++++++++
6 files changed, 1740 insertions(+), 2 deletions(-)
create mode 100644 Documentation/admin-guide/laptops/samsung-galaxybook.rst
create mode 100644 drivers/platform/x86/samsung-galaxybook-trace.h
create mode 100644 drivers/platform/x86/samsung-galaxybook.c
diff --git a/Documentation/admin-guide/laptops/samsung-galaxybook.rst
b/Documentation/admin-guide/laptops/samsung-galaxybook.rst
new file mode 100644
index 000000000000..947810c5f998
--- /dev/null
+++ b/Documentation/admin-guide/laptops/samsung-galaxybook.rst
@@ -0,0 +1,280 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+==========================
+Samsung Galaxy Book Extras
+==========================
+
+December 15, 2024
+
+Joshua Grisham <j...@joshuagrisham.com>
+
+This is a Linux x86 platform driver for Samsung Galaxy Book series notebook
+devices which utilizes Samsung's ``SCAI`` ACPI device in order to control
+extra features and receive various notifications.
+
Please only use a single empty lines in this doc.
+
+Supported devices
+=================
+
+Any device with one of the supported ACPI device IDs should be supported. This
+covers most of the "Samsung Galaxy Book" series notebooks that are currently
+available as of this writing, and could include other Samsung notebook devices
+as well.
+
+
+Status
+======
+
+The following features are currently supported:
+
+- :ref:`Keyboard backlight <keyboard-backlight>` control
+- :ref:`Performance mode <performance-mode>` control implemented using the
+ platform profile interface
+- :ref:`Battery charge control end threshold
+ <battery-charge-control-end-threshold>` (stop charging battery at given
+ percentage value) implemented as a battery device extension
+- :ref:`Settings Attributes <settings-attributes>` to allow control of various
+ device settings
+- :ref:`Handling of Fn hotkeys <keyboard-hotkey-actions>` for various actions
+- :ref:`Tracepoint <tracepoint>` event for debugging ACPI device communication
+
+Because different models of these devices can vary in their features, there is
+logic built within the driver which attempts to test each implemented feature
+for a valid response before enabling its support (registering additional
devices
+or extensions, adding sysfs attributes, etc). Therefore, it can be important to
+note that not all features may be supported for your particular device.
+
+The following features might be possible to implement but will require
+additional investigation and are therefore not supported at this time:
+
+- "Dolby Atmos" mode for the speakers
+- "Outdoor Mode" for increasing screen brightness on models with ``SAM0427``
+- "Silent Mode" on models with ``SAM0427``
+
+
+Parameters
+==========
+
+The driver includes a list of boolean parameters that allow for manually
+enabling or disabling various features:
+
+- ``kbd_backlight``: Enable Keyboard Backlight control (default on)
+- ``performance_mode``: Enable Performance Mode control (default on)
+- ``battery_threshold``: Enable battery charge threshold control (default on)
+- ``allow_recording``: Enable control to allow or block access to camera and
+ microphone (default on)
+- ``i8042_filter``: Enable capture and execution of keyboard-based hotkey
events
+ (default on)
+
+.. note::
+ Even if you explicitly try to enable a feature using its parameter, support
+ for it will still be evaluated by the driver, and the feature will be
+ disabled if it does not appear to be supported on your device.
+
+The availability of various sysfs file-based "settings" attributes
+(``usb_charge``, ``start_on_lid_open``, etc) will be determined automatically
+and cannot be manually disabled at this time.
+
+
+.. _keyboard-backlight:
+
+Keyboard backlight
+==================
+
+Controlled by parameter: ``kbd_backlight``
+
+A new LED class named ``samsung-galaxybook::kbd_backlight`` is created which
+will then expose the device using the standard sysfs-based LED interface at
+``/sys/class/leds/samsung-galaxybook::kbd_backlight``. Brightness can be
+controlled by writing values 0 to 3 to the ``brightness`` sysfs attribute or
+with any other desired userspace utility.
+
+.. note::
+ Most of these devices have an ambient light sensor which also turns
+ off the keyboard backlight under well-lit conditions. This behavior does not
+ seem possible to control at this time, but can be good to be aware of.
+
+
+.. _performance-mode:
+
+Performance mode
+================
+
+Controlled by parameter: ``performance_mode``
+
+This driver implements the
+Documentation/userspace-api/sysfs-platform_profile.rst interface for working
+with the "performance mode" function of the Samsung ACPI device.
+
+Mapping of each Samsung "performance mode" to its respective platform profile
is
+done dynamically based on a list of the supported modes reported by the device
+itself. Preference is given to always try and map ``low-power``, ``balanced``,
+and ``performance`` profiles, as these seem to be the most common profiles
+utilized (and sometimes even required) by various userspace tools.
+
+The result of the mapping will be printed in the kernel log when the module is
+loaded. Supported profiles can also be retrieved from
+``/sys/firmware/acpi/platform_profile_choices``, while
+``/sys/firmware/acpi/platform_profile`` can be used to read or write the
+currently selected profile.
+
+The ``balanced`` platform profile will be set during module load if no profile
+has been previously set.
+
+
+.. _battery-charge-control-end-threshold:
+
+Battery charge control end threshold
+====================================
+
+Controlled by parameter: ``battery_threshold``
+
+This platform driver will add the ability to set the battery's charge control
+end threshold, but does not have the ability to set a start threshold.
+
+This feature is typically called "Battery Saver" by the various Samsung
+applications in Windows, but in Linux we have implemented the standardized
+"charge control threshold" sysfs interface on the battery device to allow for
+controlling this functionality from the userspace.
+
+The sysfs attribute
+``/sys/class/power_supply/BAT1/charge_control_end_threshold`` can be used to
+read or set the desired charge end threshold.
+
+If you wish to maintain interoperability with Windows, then you should set the
+value to 80 to represent "on", or 0 to represent "off", as these are the values
+currently recognized by the various Windows-based Samsung applications and
+services as "on" or "off". Otherwise, the device will accept any value between 0
+(off) and 99 as the percentage that you wish the battery to stop charging at.
+
+.. note::
+ If you try to set a value of 100, the driver will also accept this input, but
+ will set the attribute value to 0 (i.e. 100% will "remove" the end
threshold).
+
+
+.. _settings-attributes:
+
+Settings Attributes
+===================
+
+Various hardware settings can be controlled by the following sysfs attributes:
+
+- ``allow_recording`` (allows or blocks usage of built-in camera and
microphone)
+- ``start_on_lid_open`` (power on automatically when opening the lid)
+- ``usb_charge`` (allows USB ports to provide power even when device is off)
+
+These attributes will be available under the path for your supported ACPI
Device
+ID's platform device (``SAM0428``, ``SAM0429``, etc), and can most reliably
+be found by seeing which device has been bound to the ``samsung-galaxybook``
+driver. Here are some examples: ::
+
+ # find which device ID has been bound to the driver
+ ls /sys/bus/platform/drivers/samsung-galaxybook/ | grep SAM
+
+ # see SAM0429 attributes
+ ls /sys/bus/platform/drivers/samsung-galaxybook/SAM0429\:00
+
+ # see attributes no matter the device ID (using wildcard expansion)
+ ls /sys/bus/platform/drivers/samsung-galaxybook/SAM*
+
+Most shells should support using wildcard expansion to directly read and write
+these attributes using the above pattern. Example: ::
+
+ # read value of start_on_lid_open
+ cat /sys/bus/platform/drivers/samsung-galaxybook/SAM*/start_on_lid_open
+
+ # turn on start_on_lid_open
+ echo true | sudo tee
/sys/bus/platform/drivers/samsung-galaxybook/SAM*/start_on_lid_open
+
+It is also possible to use a udev rule to create a fixed-path symlink to your
+device under ``/dev`` (e.g. ``/dev/samsung-galaxybook``), no matter the device
+ID, to further simplify reading and writing these attributes in the userspace.
+
+Allow recording (allow_recording)
+---------------------------------
+
+``/sys/bus/platform/drivers/samsung-galaxybook/SAM*/allow_recording``
+
+Controlled by parameter: ``allow_recording``
+
+Controls the "Allow recording" setting, which allows or blocks usage of the
+built-in camera and microphone (boolean).
+
+Start on lid open (start_on_lid_open)
+-------------------------------------
+
+``/sys/bus/platform/drivers/samsung-galaxybook/SAM*/start_on_lid_open``
+
+Controls the "Start on lid open" setting, which sets the device to power on
+automatically when the lid is opened (boolean).
+
+USB charge (usb_charge)
+-----------------------
+
+``/sys/bus/platform/drivers/samsung-galaxybook/SAM*/usb_charge``
+
+Controls the "USB charge" setting, which allows USB ports to provide power even
+when the device is turned off (boolean).
+
+.. note::
+ For most devices, this setting seems to only apply to the USB-C ports.
+
+
+.. _keyboard-hotkey-actions:
+
+Keyboard hotkey actions (i8042 filter)
+======================================
+
+Controlled by parameter: ``i8042_filter``
+
+The i8042 filter will swallow the keyboard events for the Fn+F9 hotkey (Multi-
+level keyboard backlight toggle) and Fn+F10 hotkey (Allow/block recording
+toggle) and instead execute their actions within the driver itself.
+
+Fn+F9 will cycle through the brightness levels of the keyboard backlight. A
+notification will be sent using ``led_classdev_notify_brightness_hw_changed``
+so that the userspace can be aware of the change. This mimics the behavior of
+other existing devices where the brightness level is cycled internally by the
+embedded controller and then reported via a notification.
+
+Fn+F10 will toggle the value of the "Allow recording" setting.
+
+
+ACPI notifications and ACPI hotkey actions
+==========================================
+
+There is a new "Samsung Galaxy Book extra buttons" input device created which
+will send input events for the following notifications from the ACPI device:
+
+- Notification when the battery charge control end threshold has been reached
+ and the "battery saver" feature has stopped the battery from charging
+- Notification when the device has been placed on a table (not available on all
+ models)
+- Notification when the device has been lifted from a table (not available on
+ all models)
+
+The Fn+F11 Performance mode hotkey is received as an ACPI notification. It will
+be handled in a similar way as the Fn+F9 and Fn+F10 hotkeys; namely, that the
+keypress will be swallowed by the driver and each press will cycle to the next
+available platform profile.
+
+
+.. _tracepoint:
+
+Tracepoint for debugging ACPI communication
+===========================================
+
+A new tracepoint event ``samsung_galaxybook:samsung_galaxybook_acpi`` will
+provide a trace of the buffers sent to, and received from, the ACPI device
+methods.
+
+Here is an example of how to use it: ::
+
+ # Enable tracepoint events
+ echo 1 | sudo tee /sys/kernel/tracing/events/samsung_galaxybook/enable
+
+ # Perform some actions using the driver and then read the result
+ sudo cat /sys/kernel/tracing/trace
+
+ # Disable tracepoint events when you are finished
+ echo 0 | sudo tee /sys/kernel/tracing/events/samsung_galaxybook/enable
diff --git a/MAINTAINERS b/MAINTAINERS
index 3809931b9240..9e3b45cf799f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -20733,6 +20733,14 @@ L: linux-fb...@vger.kernel.org
S: Maintained
F: drivers/video/fbdev/s3c-fb.c
+SAMSUNG GALAXY BOOK EXTRAS DRIVER
+M: Joshua Grisham <j...@joshuagrisham.com>
+L: platform-driver-...@vger.kernel.org
+S: Maintained
+F: Documentation/admin-guide/laptops/samsung-galaxybook.rst
+F: drivers/platform/x86/samsung-galaxybook-trace.h
+F: drivers/platform/x86/samsung-galaxybook.c
+
SAMSUNG INTERCONNECT DRIVERS
M: Sylwester Nawrocki <s.nawro...@samsung.com>
M: Artur Świgoń <a.swi...@samsung.com>
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index 0258dd879d64..03f4fb0e93e7 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -778,6 +778,24 @@ config BARCO_P50_GPIO
To compile this driver as a module, choose M here: the module
will be called barco-p50-gpio.
+config SAMSUNG_GALAXYBOOK
+ tristate "Samsung Galaxy Book extras driver"
+ depends on ACPI
+ depends on ACPI_BATTERY
+ depends on INPUT
+ depends on SERIO_I8042
+ select ACPI_PLATFORM_PROFILE
+ select INPUT_SPARSEKMAP
+ select NEW_LEDS
+ select LEDS_CLASS
+ help
+ This is a driver for Samsung Galaxy Book series notebooks. It adds
+ support for the keyboard backlight control, performance mode control,
fan
+ speed reporting, function keys, and various other device controls.
+
+ For more information about this driver, see
+ <file:Documentation/admin-guide/laptops/samsung-galaxybook.rst>.
+
config SAMSUNG_LAPTOP
tristate "Samsung Laptop driver"
depends on RFKILL || RFKILL = n
diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
index e1b142947067..32ec4cb9d902 100644
--- a/drivers/platform/x86/Makefile
+++ b/drivers/platform/x86/Makefile
@@ -95,8 +95,9 @@ obj-$(CONFIG_PCENGINES_APU2) += pcengines-apuv2.o
obj-$(CONFIG_BARCO_P50_GPIO) += barco-p50-gpio.o
# Samsung
-obj-$(CONFIG_SAMSUNG_LAPTOP) += samsung-laptop.o
-obj-$(CONFIG_SAMSUNG_Q10) += samsung-q10.o
+obj-$(CONFIG_SAMSUNG_GALAXYBOOK) += samsung-galaxybook.o
+obj-$(CONFIG_SAMSUNG_LAPTOP) += samsung-laptop.o
+obj-$(CONFIG_SAMSUNG_Q10) += samsung-q10.o
# Toshiba
obj-$(CONFIG_TOSHIBA_BT_RFKILL) += toshiba_bluetooth.o
diff --git a/drivers/platform/x86/samsung-galaxybook-trace.h
b/drivers/platform/x86/samsung-galaxybook-trace.h
new file mode 100644
index 000000000000..09ab6dbe6586
--- /dev/null
+++ b/drivers/platform/x86/samsung-galaxybook-trace.h
@@ -0,0 +1,51 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Samsung Galaxy Book series extras driver tracepoint events
+ *
+ * Copyright (c) 2024 Joshua Grisham <j...@joshuagrisham.com>
+ */
+
+#if !defined(_TRACE_SAMSUNG_GALAXYBOOK_H_) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_SAMSUNG_GALAXYBOOK_H_
+
+#include <linux/types.h>
+#include <linux/tracepoint.h>
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM samsung_galaxybook
+
+#define GALAXYBOOK_TRACE_MAX_ACPI_BUF_LENGTH 0x100
+
+TRACE_EVENT(samsung_galaxybook_acpi,
+ TP_PROTO(const char *devname, const char *method, const char *label, u8
*buf, size_t len),
+ TP_ARGS(devname, method, label, buf, len),
+ TP_STRUCT__entry(
+ __string(devname, devname)
+ __string(method, method)
+ __string(label, label)
+ __array(u8, buf, GALAXYBOOK_TRACE_MAX_ACPI_BUF_LENGTH)
+ __field(size_t, len)
+ ),
+ TP_fast_assign(
+ __assign_str(devname);
+ __assign_str(method);
+ __assign_str(label);
+ memcpy(__entry->buf, buf, len);
+ __entry->len = len;
+ ),
+ TP_printk("device: %s, method: %s, %s: %s",
+ __get_str(devname),
+ __get_str(method),
+ __get_str(label),
+ __print_hex(__entry->buf, __entry->len))
+);
I CCed the tracing guys so they can share their opinion on this.
+
+#endif
+
+#undef TRACE_INCLUDE_PATH
+#undef TRACE_INCLUDE_FILE
+
+#define TRACE_INCLUDE_PATH ../../drivers/platform/x86
+#define TRACE_INCLUDE_FILE samsung-galaxybook-trace
+
+#include <trace/define_trace.h>
diff --git a/drivers/platform/x86/samsung-galaxybook.c
b/drivers/platform/x86/samsung-galaxybook.c
new file mode 100644
index 000000000000..7baa3441fbfa
--- /dev/null
+++ b/drivers/platform/x86/samsung-galaxybook.c
@@ -0,0 +1,1380 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Samsung Galaxy Book series extras driver
+ *
+ * Copyright (c) 2024 Joshua Grisham <j...@joshuagrisham.com>
+ *
+ * With contributions to the SCAI ACPI device interface:
+ * Copyright (c) 2024 Giulio Girardi <giulio.gira...@protechgroup.it>
+ *
+ * Implementation inspired by existing x86 platform drivers.
+ * Thank you to the authors!
+ */
+
+#include <linux/acpi.h>
+#include <linux/err.h>
+#include <linux/i8042.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/input/sparse-keymap.h>
+#include <linux/kernel.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/platform_profile.h>
+#include <linux/serio.h>
+#include <linux/sysfs.h>
+#include <linux/uuid.h>
+#include <linux/workqueue.h>
+#include <acpi/battery.h>
+
+#define CREATE_TRACE_POINTS
+#include "samsung-galaxybook-trace.h"
+
+#define DRIVER_NAME "samsung-galaxybook"
+
+/*
+ * Module parameters
+ */
+
+static bool kbd_backlight = true;
+static bool battery_threshold = true;
+static bool performance_mode = true;
+static bool allow_recording = true;
+static bool i8042_filter = true;
+
+module_param(kbd_backlight, bool, 0);
+MODULE_PARM_DESC(kbd_backlight, "Enable Keyboard Backlight control (default
on)");
+module_param(battery_threshold, bool, 0);
+MODULE_PARM_DESC(battery_threshold, "Enable battery charge threshold control
(default on)");
+module_param(performance_mode, bool, 0);
+MODULE_PARM_DESC(performance_mode, "Enable Performance Mode control (default
on)");
+module_param(allow_recording, bool, 0);
+MODULE_PARM_DESC(allow_recording,
+ "Enable control to allow or block access to camera and microphone
(default on)");
+module_param(i8042_filter, bool, 0);
+MODULE_PARM_DESC(i8042_filter, "Enable capturing keyboard hotkey events (default
on)");
+
+/*
+ * Device definitions and matching
+ */
+
+static const struct acpi_device_id galaxybook_device_ids[] = {
+ { "SAM0427" },
+ { "SAM0428" },
+ { "SAM0429" },
+ { "SAM0430" },
+ {},
+};
+MODULE_DEVICE_TABLE(acpi, galaxybook_device_ids);
+
+struct samsung_galaxybook {
+ struct platform_device *platform;
+ struct acpi_device *acpi;
+ struct mutex acpi_lock;
+
+ struct led_classdev kbd_backlight;
+
+ struct input_dev *input;
+ struct mutex input_lock;
+
+ void *i8042_filter_ptr;
+ struct work_struct kbd_backlight_hotkey_work;
+ struct work_struct allow_recording_hotkey_work;
+
+ struct acpi_battery_hook battery_hook;
+ struct device_attribute charge_control_end_threshold_attr;
+
+ u8 *profile_performance_modes;
+ struct platform_profile_handler profile_handler;
+};
+static struct samsung_galaxybook *galaxybook_ptr;
+
+struct sawb {
+ u16 safn;
+ u16 sasb;
+ u8 rflg;
+ union {
+ struct {
+ u8 gunm;
+ u8 guds[250];
+ };
+ struct {
+ u8 caid[16];
+ u8 fncn;
+ u8 subn;
+ u8 iob0;
+ u8 iob1;
+ u8 iob2;
+ u8 iob3;
+ u8 iob4;
+ u8 iob5;
+ u8 iob6;
+ u8 iob7;
+ u8 iob8;
+ u8 iob9;
+ };
+ struct {
+ u8 iob_prefix[18];
+ u8 iob_values[10];
+ };
+ };
+};
+
+#define SAWB_LEN_SETTINGS 0x15
+#define SAWB_LEN_PERFORMANCE_MODE 0x100
+
+#define SAFN 0x5843
+
+#define SASB_KBD_BACKLIGHT 0x78
+#define SASB_POWER_MANAGEMENT 0x7a
+#define SASB_USB_CHARGE_GET 0x67
+#define SASB_USB_CHARGE_SET 0x68
+#define SASB_NOTIFICATIONS 0x86
+#define SASB_ALLOW_RECORDING 0x8a
+#define SASB_PERFORMANCE_MODE 0x91
+
+#define SAWB_RFLG_POS 4
+#define SAWB_GUNM_POS 5
+
+#define RFLG_SUCCESS 0xaa
+#define GUNM_FAIL 0xff
+
+#define GUNM_FEATURE_ENABLE 0xbb
+#define GUNM_FEATURE_ENABLE_SUCCESS 0xdd
+#define GUDS_FEATURE_ENABLE 0xaa
+#define GUDS_FEATURE_ENABLE_SUCCESS 0xcc
+
+#define GUNM_GET 0x81
+#define GUNM_SET 0x82
+
+#define GUNM_POWER_MANAGEMENT 0x82
+
+#define GUNM_USB_CHARGE_GET 0x80
+#define GUNM_USB_CHARGE_ON 0x81
+#define GUNM_USB_CHARGE_OFF 0x80
+#define GUDS_START_ON_LID_OPEN 0xa3
+#define GUDS_START_ON_LID_OPEN_GET 0x81
+#define GUDS_START_ON_LID_OPEN_SET 0x80
+#define GUDS_BATTERY_CHARGE_CONTROL 0xe9
+#define GUDS_BATTERY_CHARGE_CONTROL_GET 0x91
+#define GUDS_BATTERY_CHARGE_CONTROL_SET 0x90
+#define GUNM_ACPI_NOTIFY_ENABLE 0x80
+#define GUDS_ACPI_NOTIFY_ENABLE 0x02
+
+#define FNCN_PERFORMANCE_MODE 0x51
+#define SUBN_PERFORMANCE_MODE_LIST 0x01
+#define SUBN_PERFORMANCE_MODE_GET 0x02
+#define SUBN_PERFORMANCE_MODE_SET 0x03
+
+/* guid 8246028d-8bca-4a55-ba0f-6f1e6b921b8f */
+static const guid_t performance_mode_guid_value =
+ GUID_INIT(0x8246028d, 0x8bca, 0x4a55, 0xba, 0x0f, 0x6f, 0x1e, 0x6b,
0x92, 0x1b, 0x8f);
+#define PERFORMANCE_MODE_GUID performance_mode_guid_value
+
+#define PERFORMANCE_MODE_ULTRA 0x16
+#define PERFORMANCE_MODE_PERFORMANCE 0x15
+#define PERFORMANCE_MODE_SILENT 0xb
+#define PERFORMANCE_MODE_QUIET 0xa
+#define PERFORMANCE_MODE_OPTIMIZED 0x2
+#define PERFORMANCE_MODE_PERFORMANCE_LEGACY 0x1
+#define PERFORMANCE_MODE_OPTIMIZED_LEGACY 0x0
+#define PERFORMANCE_MODE_UNKNOWN 0xff
+
+#define DEFAULT_PLATFORM_PROFILE PLATFORM_PROFILE_BALANCED
+
+#define ACPI_METHOD_ENABLE "SDLS"
+#define ACPI_METHOD_ENABLE_ON 1
+#define ACPI_METHOD_ENABLE_OFF 0
+#define ACPI_METHOD_SETTINGS "CSFI"
+#define ACPI_METHOD_PERFORMANCE_MODE "CSXI"
+
+#define KBD_BACKLIGHT_MAX_BRIGHTNESS 3
+
+#define ACPI_NOTIFY_BATTERY_STATE_CHANGED 0x61
+#define ACPI_NOTIFY_DEVICE_ON_TABLE 0x6c
+#define ACPI_NOTIFY_DEVICE_OFF_TABLE 0x6d
+#define ACPI_NOTIFY_HOTKEY_PERFORMANCE_MODE 0x70
+
+#define GB_KEY_KBD_BACKLIGHT_KEYDOWN 0x2c
+#define GB_KEY_KBD_BACKLIGHT_KEYUP 0xac
+#define GB_KEY_ALLOW_RECORDING_KEYDOWN 0x1f
+#define GB_KEY_ALLOW_RECORDING_KEYUP 0x9f
+
+static const struct key_entry galaxybook_acpi_keymap[] = {
+ { KE_KEY, ACPI_NOTIFY_BATTERY_STATE_CHANGED, { KEY_BATTERY } },
+ { KE_KEY, ACPI_NOTIFY_DEVICE_ON_TABLE, { KEY_F14 } },
+ { KE_KEY, ACPI_NOTIFY_DEVICE_OFF_TABLE, { KEY_F15 } },
+ { KE_KEY, ACPI_NOTIFY_HOTKEY_PERFORMANCE_MODE, { KEY_UNKNOWN } },
+ { KE_END, 0 },
+};
+
+/*
+ * ACPI method handling
+ */
+
+static int galaxybook_acpi_method(struct samsung_galaxybook *galaxybook,
acpi_string method,
+ struct sawb *in_buf, size_t len, const char
*purpose_str,
+ struct sawb *out_buf)
+{
+ struct acpi_buffer output = {ACPI_ALLOCATE_BUFFER, NULL};
+ union acpi_object in_obj, *out_obj;
+ struct acpi_object_list input;
+ acpi_status status;
+ int err;
+
+ mutex_lock(&galaxybook->acpi_lock);
I do not think that providing locking around each ACPI method call is
necessary, the AML code will
do this itself if necessary.
+
+ in_obj.type = ACPI_TYPE_BUFFER;
+ in_obj.buffer.length = len;
+ in_obj.buffer.pointer = (u8 *)in_buf;
+
+ input.count = 1;
+ input.pointer = &in_obj;
+
+ trace_samsung_galaxybook_acpi(dev_name(&galaxybook->acpi->dev), method,
purpose_str,
+ in_obj.buffer.pointer,
in_obj.buffer.length);
+
+ status = acpi_evaluate_object_typed(galaxybook->acpi->handle, method,
&input, &output,
+ ACPI_TYPE_BUFFER);
+
+ if (ACPI_FAILURE(status)) {
+ dev_err(&galaxybook->acpi->dev, "failed %s with ACPI method %s; got
%s\n",
+ purpose_str, method, acpi_format_exception(status));
+ err = -ENXIO;
-EIO please.
+ goto out_free;
out_obj is not assigned here so this would cause problems. Please just return
directly.
+ }
+
+ out_obj = output.pointer;
+
+ trace_samsung_galaxybook_acpi(dev_name(&galaxybook->acpi->dev), method,
"response",
+ out_obj->buffer.pointer,
out_obj->buffer.length);
+
+ if (out_obj->buffer.length != len || out_obj->buffer.length <
SAWB_GUNM_POS + 1) {
+ dev_err(&galaxybook->acpi->dev, "failed %s with ACPI method %s;
"
+ "response length mismatch\n",
+ purpose_str, method);
+ err = -ETOOSMALL;
-EPROTO please.
+ goto out_free;
+ }
+ if (out_obj->buffer.pointer[SAWB_RFLG_POS] != RFLG_SUCCESS) {
+ dev_err(&galaxybook->acpi->dev, "failed %s with ACPI method %s;
"
+ "device did not respond with success code 0x%x\n",
+ purpose_str, method, RFLG_SUCCESS);
+ err = -EIO;
-ENXIO please.
+ goto out_free;
+ }
+ if (out_obj->buffer.pointer[SAWB_GUNM_POS] == GUNM_FAIL) {
+ dev_err(&galaxybook->acpi->dev,
+ "failed %s with ACPI method %s; device responded with
failure code 0x%x\n",
+ purpose_str, method, GUNM_FAIL);
+ err = -EIO;
-ENXIO please.
+ goto out_free;
+ }
+
+ memcpy(out_buf, out_obj->buffer.pointer, len);
+ err = 0;
+
+out_free:
+ kfree(out_obj);
+ mutex_unlock(&galaxybook->acpi_lock);
+ return err;
+}
+
+static int galaxybook_enable_acpi_feature(struct samsung_galaxybook
*galaxybook, const u16 sasb)
+{
+ struct sawb buf = { 0 };
+ int err;
+
+ buf.safn = SAFN;
+ buf.sasb = sasb;
+ buf.gunm = GUNM_FEATURE_ENABLE;
+ buf.guds[0] = GUDS_FEATURE_ENABLE;
+
+ err = galaxybook_acpi_method(galaxybook, ACPI_METHOD_SETTINGS, &buf,
SAWB_LEN_SETTINGS,
+ "enabling ACPI feature", &buf);
+ if (err)
+ return err;
+
+ if (buf.gunm != GUNM_FEATURE_ENABLE_SUCCESS && buf.guds[0] !=
GUDS_FEATURE_ENABLE_SUCCESS)
+ return -ENODEV;
+
+ return 0;
+}
+
+/*
+ * Keyboard Backlight
+ */
+
+static int kbd_backlight_acpi_set(struct samsung_galaxybook *galaxybook,
+ const enum led_brightness brightness)
+{
+ struct sawb buf = { 0 };
+ int err;
+
+ buf.safn = SAFN;
+ buf.sasb = SASB_KBD_BACKLIGHT;
+ buf.gunm = GUNM_SET;
+
+ buf.guds[0] = brightness;
+
+ err = galaxybook_acpi_method(galaxybook, ACPI_METHOD_SETTINGS, &buf,
SAWB_LEN_SETTINGS,
+ "setting kbd_backlight brightness", &buf);
+ if (err)
+ return err;
+
+ galaxybook->kbd_backlight.brightness = brightness;
This variable is handled by the LED class code, please do not access it.
+
+ return 0;
+}
+
+static int kbd_backlight_acpi_get(struct samsung_galaxybook *galaxybook,
+ enum led_brightness *brightness)
+{
+ struct sawb buf = { 0 };
+ int err;
+
+ buf.safn = SAFN;
+ buf.sasb = SASB_KBD_BACKLIGHT;
+ buf.gunm = GUNM_GET;
+
+ err = galaxybook_acpi_method(galaxybook, ACPI_METHOD_SETTINGS, &buf,
SAWB_LEN_SETTINGS,
+ "getting kbd_backlight brightness", &buf);
+ if (err)
+ return err;
+
+ *brightness = buf.gunm;
+ galaxybook->kbd_backlight.brightness = buf.gunm;
Same as above.
+
+ return 0;
+}
+
+static int kbd_backlight_store(struct led_classdev *led,
+ const enum led_brightness brightness)
+{
+ struct samsung_galaxybook *galaxybook =
+ container_of(led, struct samsung_galaxybook, kbd_backlight);
+
+ return kbd_backlight_acpi_set(galaxybook, brightness);
+}
+
+static enum led_brightness kbd_backlight_show(struct led_classdev *led)
+{
+ struct samsung_galaxybook *galaxybook =
+ container_of(led, struct samsung_galaxybook, kbd_backlight);
+ enum led_brightness brightness;
+ int err;
+
+ err = kbd_backlight_acpi_get(galaxybook, &brightness);
+ if (err)
+ return err;
+
+ return brightness;
+}
+
+static int galaxybook_kbd_backlight_init(struct samsung_galaxybook *galaxybook)
+{
+ struct led_init_data init_data = {};
+ enum led_brightness brightness;
+ int err;
+
+ err = galaxybook_enable_acpi_feature(galaxybook, SASB_KBD_BACKLIGHT);
+ if (err)
+ return err;
+
+ /* verify we can read the value, otherwise init should stop and fail */
+ err = kbd_backlight_acpi_get(galaxybook, &brightness);
+ if (err)
+ return err;
+
+ init_data.devicename = DRIVER_NAME;
+ init_data.default_label = ":" LED_FUNCTION_KBD_BACKLIGHT;
+ init_data.devname_mandatory = true;
+
+ galaxybook->kbd_backlight.brightness_get = kbd_backlight_show;
+ galaxybook->kbd_backlight.brightness_set_blocking = kbd_backlight_store;
+ galaxybook->kbd_backlight.flags = LED_BRIGHT_HW_CHANGED;
+ galaxybook->kbd_backlight.max_brightness = KBD_BACKLIGHT_MAX_BRIGHTNESS;
+
+ return devm_led_classdev_register_ext(&galaxybook->platform->dev,
+ &galaxybook->kbd_backlight,
&init_data);
+}
+
+/*
+ * Platform device attributes (configuration properties which can be
controlled via userspace)
+ */
+
+/* Start on lid open (device should power on when lid is opened) */
+
+static int start_on_lid_open_acpi_set(struct samsung_galaxybook *galaxybook,
const bool value)
+{
+ struct sawb buf = { 0 };
+
+ buf.safn = SAFN;
+ buf.sasb = SASB_POWER_MANAGEMENT;
+ buf.gunm = GUNM_POWER_MANAGEMENT;
+ buf.guds[0] = GUDS_START_ON_LID_OPEN;
+ buf.guds[1] = GUDS_START_ON_LID_OPEN_SET;
+ buf.guds[2] = value ? 1 : 0;
+
+ return galaxybook_acpi_method(galaxybook, ACPI_METHOD_SETTINGS, &buf,
SAWB_LEN_SETTINGS,
+ "setting start_on_lid_open", &buf);
+}
+
+static int start_on_lid_open_acpi_get(struct samsung_galaxybook *galaxybook,
bool *value)
+{
+ struct sawb buf = { 0 };
+ int err;
+
+ buf.safn = SAFN;
+ buf.sasb = SASB_POWER_MANAGEMENT;
+ buf.gunm = GUNM_POWER_MANAGEMENT;
+ buf.guds[0] = GUDS_START_ON_LID_OPEN;
+ buf.guds[1] = GUDS_START_ON_LID_OPEN_GET;
+
+ err = galaxybook_acpi_method(galaxybook, ACPI_METHOD_SETTINGS, &buf,
SAWB_LEN_SETTINGS,
+ "getting start_on_lid_open", &buf);
+ if (err)
+ return err;
+
+ *value = buf.guds[1];
+
+ return 0;
+}
+
+static ssize_t start_on_lid_open_store(struct device *dev, struct
device_attribute *attr,
+ const char *buffer, size_t count)
+{
+ struct samsung_galaxybook *galaxybook = dev_get_drvdata(dev);
+ bool value;
+ int err;
+
+ if (!count)
+ return -EINVAL;
+
+ err = kstrtobool(buffer, &value);
+ if (err)
+ return err;
+
+ err = start_on_lid_open_acpi_set(galaxybook, value);
+ if (err)
+ return err;
+
+ return count;
+}
+
+static ssize_t start_on_lid_open_show(struct device *dev, struct
device_attribute *attr,
+ char *buffer)
+{
+ struct samsung_galaxybook *galaxybook = dev_get_drvdata(dev);
+ bool value;
+ int err;
+
+ err = start_on_lid_open_acpi_get(galaxybook, &value);
+ if (err)
+ return err;
+
+ return sysfs_emit(buffer, "%u\n", value);
+}
+
+static DEVICE_ATTR_RW(start_on_lid_open);
+
+/* USB Charge (USB ports can charge other devices even when device is powered
off) */
+
+static int usb_charge_acpi_set(struct samsung_galaxybook *galaxybook, const
bool value)
+{
+ struct sawb buf = { 0 };
+
+ buf.safn = SAFN;
+ buf.sasb = SASB_USB_CHARGE_SET;
+ buf.gunm = value ? GUNM_USB_CHARGE_ON : GUNM_USB_CHARGE_OFF;
+
+ return galaxybook_acpi_method(galaxybook, ACPI_METHOD_SETTINGS, &buf,
SAWB_LEN_SETTINGS,
+ "setting usb_charge", &buf);
+}
+
+static int usb_charge_acpi_get(struct samsung_galaxybook *galaxybook, bool
*value)
+{
+ struct sawb buf = { 0 };
+ int err;
+
+ buf.safn = SAFN;
+ buf.sasb = SASB_USB_CHARGE_GET;
+ buf.gunm = GUNM_USB_CHARGE_GET;
+
+ err = galaxybook_acpi_method(galaxybook, ACPI_METHOD_SETTINGS, &buf,
SAWB_LEN_SETTINGS,
+ "getting usb_charge", &buf);
+ if (err)
+ return err;
+
+ *value = buf.gunm;
+
+ return 0;
+}
+
+static ssize_t usb_charge_store(struct device *dev, struct device_attribute
*attr,
+ const char *buffer, size_t count)
+{
+ struct samsung_galaxybook *galaxybook = dev_get_drvdata(dev);
+ bool value;
+ int err;
+
+ if (!count)
+ return -EINVAL;
+
+ err = kstrtobool(buffer, &value);
+ if (err)
+ return err;
+
+ err = usb_charge_acpi_set(galaxybook, value);
+ if (err)
+ return err;
+
+ return count;
+}
+
+static ssize_t usb_charge_show(struct device *dev, struct device_attribute
*attr, char *buffer)
+{
+ struct samsung_galaxybook *galaxybook = dev_get_drvdata(dev);
+ bool value;
+ int err;
+
+ err = usb_charge_acpi_get(galaxybook, &value);
+ if (err)
+ return err;
+
+ return sysfs_emit(buffer, "%u\n", value);
+}
+
+static DEVICE_ATTR_RW(usb_charge);
+
+/* Allow recording (allows or blocks access to camera and microphone) */
+
+static int allow_recording_acpi_set(struct samsung_galaxybook *galaxybook,
const bool value)
+{
+ struct sawb buf = { 0 };
+
+ buf.safn = SAFN;
+ buf.sasb = SASB_ALLOW_RECORDING;
+ buf.gunm = GUNM_SET;
+ buf.guds[0] = value ? 1 : 0;
+
+ return galaxybook_acpi_method(galaxybook, ACPI_METHOD_SETTINGS, &buf,
SAWB_LEN_SETTINGS,
+ "setting allow_recording", &buf);
+}
+
+static int allow_recording_acpi_get(struct samsung_galaxybook *galaxybook,
bool *value)
+{
+ struct sawb buf = { 0 };
+ int err;
+
+ buf.safn = SAFN;
+ buf.sasb = SASB_ALLOW_RECORDING;
+ buf.gunm = GUNM_GET;
+
+ err = galaxybook_acpi_method(galaxybook, ACPI_METHOD_SETTINGS, &buf,
SAWB_LEN_SETTINGS,
+ "getting allow_recording", &buf);
+ if (err)
+ return err;
+
+ *value = buf.gunm == 1;
+
+ return 0;
+}
+
+static ssize_t allow_recording_store(struct device *dev, struct
device_attribute *attr,
+ const char *buffer, size_t count)
+{
+ struct samsung_galaxybook *galaxybook = dev_get_drvdata(dev);
+ bool value;
+ int err;
+
+ if (!count)
+ return -EINVAL;
+
+ err = kstrtobool(buffer, &value);
+ if (err)
+ return err;
+
+ err = allow_recording_acpi_set(galaxybook, value);
+ if (err)
+ return err;
+
+ return count;
+}
+
+static ssize_t allow_recording_show(struct device *dev, struct
device_attribute *attr, char *buffer)
+{
+ struct samsung_galaxybook *galaxybook = dev_get_drvdata(dev);
+ bool value;
+ int err;
+
+ err = allow_recording_acpi_get(galaxybook, &value);
+ if (err)
+ return err;
+
+ return sysfs_emit(buffer, "%u\n", value);
+}
+
+static DEVICE_ATTR_RW(allow_recording);
+
+static umode_t galaxybook_attr_is_visible(struct kobject *kobj, struct
attribute *attr, int idx)
+{
+ struct device *dev = kobj_to_dev(kobj);
+ struct samsung_galaxybook *galaxybook = dev_get_drvdata(dev);
+ bool value;
+ int err;
+
+ if (attr == &dev_attr_start_on_lid_open.attr) {
+ err = start_on_lid_open_acpi_get(galaxybook, &value);
+ return err ? 0 : attr->mode;
+ }
+
+ if (attr == &dev_attr_usb_charge.attr) {
+ err = usb_charge_acpi_get(galaxybook, &value);
+ return err ? 0 : attr->mode;
+ }
+
+ if (attr == &dev_attr_allow_recording.attr) {
+ if (!allow_recording)
+ return 0;
+ err = galaxybook_enable_acpi_feature(galaxybook,
SASB_ALLOW_RECORDING);
+ if (err) {
+ dev_dbg(&galaxybook->platform->dev,
+ "failed to initialize ACPI allow_recording
feature\n");
+ allow_recording = false;
+ return 0;
+ }
+ err = allow_recording_acpi_get(galaxybook, &value);
+ if (err) {
+ allow_recording = false;
+ return 0;
+ }
+ return attr->mode;
+ }
+
+ return attr->mode;
+}
+
+static struct attribute *galaxybook_attrs[] = {
+ &dev_attr_start_on_lid_open.attr,
+ &dev_attr_usb_charge.attr,
+ &dev_attr_allow_recording.attr,
+};
Needs to be NULL-terminated.
+
+static const struct attribute_group galaxybook_attrs_group = {
+ .attrs = galaxybook_attrs,
+ .is_visible = galaxybook_attr_is_visible,
+};
AFAIK this can safely be added to the drivers .dev_groups. The driver core will
ensure that
those sysfs attrs are registers after the drivers .probe callback returned
successfully.
+
+/*
+ * Battery Extension (adds charge_control_end_threshold to the battery device)
+ */
+
+static int charge_control_end_threshold_acpi_set(struct samsung_galaxybook
*galaxybook, u8 value)
+{
+ struct sawb buf = { 0 };
+
+ if (value > 100)
+ return -EINVAL;
+ /* if setting to 100, should be set to 0 (no threshold) */
+ if (value == 100)
+ value = 0;
Please also handle the case here value is zero. You can for example return
-EINVAL in this case.
+
+ buf.safn = SAFN;
+ buf.sasb = SASB_POWER_MANAGEMENT;
+ buf.gunm = GUNM_POWER_MANAGEMENT;
+ buf.guds[0] = GUDS_BATTERY_CHARGE_CONTROL;
+ buf.guds[1] = GUDS_BATTERY_CHARGE_CONTROL_SET;
+ buf.guds[2] = value;
+
+ return galaxybook_acpi_method(galaxybook, ACPI_METHOD_SETTINGS, &buf,
SAWB_LEN_SETTINGS,
+ "setting battery
charge_control_end_threshold", &buf);
+}
+
+static int charge_control_end_threshold_acpi_get(struct samsung_galaxybook
*galaxybook, u8 *value)
+{
+ struct sawb buf = { 0 };
+ int err;
+
+ buf.safn = SAFN;
+ buf.sasb = SASB_POWER_MANAGEMENT;
+ buf.gunm = GUNM_POWER_MANAGEMENT;
+ buf.guds[0] = GUDS_BATTERY_CHARGE_CONTROL;
+ buf.guds[1] = GUDS_BATTERY_CHARGE_CONTROL_GET;
+
+ err = galaxybook_acpi_method(galaxybook, ACPI_METHOD_SETTINGS, &buf,
SAWB_LEN_SETTINGS,
+ "getting battery
charge_control_end_threshold", &buf);
+ if (err)
+ return err;
+
+ *value = buf.guds[1];
+
+ return 0;
+}
+
+static ssize_t charge_control_end_threshold_store(struct device *dev, struct
device_attribute *attr,
+ const char *buffer, size_t
count)
+{
+ struct samsung_galaxybook *galaxybook =
+ container_of(attr, struct samsung_galaxybook,
charge_control_end_threshold_attr);
+ u8 value;
+ int err;
+
+ if (!count)
+ return -EINVAL;
+
+ err = kstrtou8(buffer, 0, &value);
+ if (err)
+ return err;
+
+ err = charge_control_end_threshold_acpi_set(galaxybook, value);
+ if (err)
+ return err;
+
+ return count;
+}
+
+static ssize_t charge_control_end_threshold_show(struct device *dev, struct
device_attribute *attr,
+ char *buffer)
+{
+ struct samsung_galaxybook *galaxybook =
+ container_of(attr, struct samsung_galaxybook,
charge_control_end_threshold_attr);
+ u8 value;
+ int err;
+
+ err = charge_control_end_threshold_acpi_get(galaxybook, &value);
+ if (err)
+ return err;
+
+ return sysfs_emit(buffer, "%d\n", value);
+}
+
+static int galaxybook_battery_add(struct power_supply *battery, struct
acpi_battery_hook *hook)
+{
+ struct samsung_galaxybook *galaxybook =
+ container_of(hook, struct samsung_galaxybook, battery_hook);
+
+ return device_create_file(&battery->dev,
&galaxybook->charge_control_end_threshold_attr);
+}
+
+static int galaxybook_battery_remove(struct power_supply *battery, struct
acpi_battery_hook *hook)
+{
+ struct samsung_galaxybook *galaxybook =
+ container_of(hook, struct samsung_galaxybook, battery_hook);
+
+ device_remove_file(&battery->dev,
&galaxybook->charge_control_end_threshold_attr);
+ return 0;
+}
+
+static int galaxybook_battery_threshold_init(struct samsung_galaxybook
*galaxybook)
+{
+ struct acpi_battery_hook *hook;
+ struct device_attribute *attr;
+ u8 value;
+ int err;
+
+ err = charge_control_end_threshold_acpi_get(galaxybook, &value);
+ if (err)
+ return err;
+
+ hook = &galaxybook->battery_hook;
+ hook->add_battery = galaxybook_battery_add;
+ hook->remove_battery = galaxybook_battery_remove;
+ hook->name = "Samsung Galaxy Book Battery Extension";
+
+ attr = &galaxybook->charge_control_end_threshold_attr;
+ sysfs_attr_init(attr->attr);
+ attr->attr.name = "charge_control_end_threshold";
+ attr->attr.mode = 0644;
+ attr->show = charge_control_end_threshold_show;
+ attr->store = charge_control_end_threshold_store;
+
+ return devm_battery_hook_register(&galaxybook->platform->dev,
&galaxybook->battery_hook);
+}
+
+/*
+ * Platform Profile / Performance mode
+ */
+
+static int performance_mode_acpi_set(struct samsung_galaxybook *galaxybook,
+ const u8 performance_mode)
+{
+ struct sawb buf = { 0 };
+
+ buf.safn = SAFN;
+ buf.sasb = SASB_PERFORMANCE_MODE;
+ export_guid(buf.caid, &PERFORMANCE_MODE_GUID);
+ buf.fncn = FNCN_PERFORMANCE_MODE;
+ buf.subn = SUBN_PERFORMANCE_MODE_SET;
+ buf.iob0 = performance_mode;
+
+ return galaxybook_acpi_method(galaxybook, ACPI_METHOD_PERFORMANCE_MODE,
&buf,
+ SAWB_LEN_PERFORMANCE_MODE, "setting
performance_mode", &buf);
+}
+
+static int performance_mode_acpi_get(struct samsung_galaxybook *galaxybook, u8
*performance_mode)
+{
+ struct sawb buf = { 0 };
+ int err;
+
+ buf.safn = SAFN;
+ buf.sasb = SASB_PERFORMANCE_MODE;
+ export_guid(buf.caid, &PERFORMANCE_MODE_GUID);
+ buf.fncn = FNCN_PERFORMANCE_MODE;
+ buf.subn = SUBN_PERFORMANCE_MODE_GET;
+
+ err = galaxybook_acpi_method(galaxybook, ACPI_METHOD_PERFORMANCE_MODE,
&buf,
+ SAWB_LEN_PERFORMANCE_MODE, "getting
performance_mode", &buf);
+ if (err)
+ return err;
+
+ *performance_mode = buf.iob0;
+
+ return 0;
+}
+
+static int get_performance_mode_profile(struct samsung_galaxybook *galaxybook,
+ const u8 performance_mode,
+ enum platform_profile_option *profile)
+{
+ for (int i = 0; i < PLATFORM_PROFILE_LAST; i++) {
+ if (galaxybook->profile_performance_modes[i] ==
performance_mode) {
+ if (profile)
+ *profile = i;
+ return 0;
+ }
+ }
+
+ return -ENODATA;
+}
+
+static int galaxybook_platform_profile_set(struct platform_profile_handler
*pprof,
+ enum platform_profile_option profile)
+{
+ struct samsung_galaxybook *galaxybook =
+ container_of(pprof, struct samsung_galaxybook, profile_handler);
+
+ return performance_mode_acpi_set(galaxybook,
+
galaxybook->profile_performance_modes[profile]);
+}
+
+static int galaxybook_platform_profile_get(struct platform_profile_handler
*pprof,
+ enum platform_profile_option
*profile)
+{
+ struct samsung_galaxybook *galaxybook =
+ container_of(pprof, struct samsung_galaxybook, profile_handler);
+ u8 performance_mode;
+ int err;
+
+ err = performance_mode_acpi_get(galaxybook, &performance_mode);
+ if (err)
+ return err;
+
+ return get_performance_mode_profile(galaxybook, performance_mode,
profile);
+}
+
+static void galaxybook_profile_exit(void *data)
+{
+ struct samsung_galaxybook *galaxybook = data;
+
+ platform_profile_remove(&galaxybook->profile_handler);
+}
+
+#define IGNORE_PERFORMANCE_MODE_MAPPING -1
+
+static int galaxybook_profile_init(struct samsung_galaxybook *galaxybook)
+{
+ u8 current_performance_mode;
+ struct sawb buf = { 0 };
+ int mapped_profiles;
+ int mode_profile;
+ int err;
+ int i;
+
+ galaxybook->profile_handler.profile_get =
galaxybook_platform_profile_get;
+ galaxybook->profile_handler.profile_set =
galaxybook_platform_profile_set;
+
+ /* fetch supported performance mode values from ACPI method */
+ buf.safn = SAFN;
+ buf.sasb = SASB_PERFORMANCE_MODE;
+ export_guid(buf.caid, &PERFORMANCE_MODE_GUID);
+ buf.fncn = FNCN_PERFORMANCE_MODE;
+ buf.subn = SUBN_PERFORMANCE_MODE_LIST;
+
+ err = galaxybook_acpi_method(galaxybook, ACPI_METHOD_PERFORMANCE_MODE,
+ &buf, SAWB_LEN_PERFORMANCE_MODE,
+ "get supported performance modes", &buf);
+ if (err)
+ return err;
+
+ /* set up profile_performance_modes with "unknown" as init value */
+ galaxybook->profile_performance_modes =
+ kcalloc(PLATFORM_PROFILE_LAST, sizeof(u8), GFP_KERNEL);
+ if (!galaxybook->profile_performance_modes)
+ return -ENOMEM;
+ for (i = 0; i < PLATFORM_PROFILE_LAST; i++)
+ galaxybook->profile_performance_modes[i] =
PERFORMANCE_MODE_UNKNOWN;
+
+ /*
+ * Value returned in iob0 will have the number of supported performance
modes.
+ * The performance mode values will then be given as a list after this
(iob1-iobX).
+ * Loop backwards from last value to first value (to handle fallback
cases which come with
+ * smaller values) and map each supported value to its correct
platform_profile_option.
+ */
+ for (i = buf.iob0; i > 0; i--) {
+ /*
+ * Prefer mapping to at least performance, balanced, and
low-power profiles, as they
+ * are the profiles which are typically supported by userspace
tools
+ * (power-profiles-daemon, etc).
+ * - performance = "ultra", otherwise "performance"
+ * - balanced = "optimized", otherwise "performance" when
"ultra" is supported
+ * - low-power = "silent", otherwise "quiet"
+ * Different models support different modes. Additional
supported modes will be
+ * mapped to profiles that fall in between these 3.
+ */
+ switch (buf.iob_values[i]) {
+
+ case PERFORMANCE_MODE_ULTRA:
+ /* ultra always maps to performance */
+ mode_profile = PLATFORM_PROFILE_PERFORMANCE;
+ break;
+
+ case PERFORMANCE_MODE_PERFORMANCE:
+ /* if ultra exists, map performance to
balanced-performance */
+ if
(galaxybook->profile_performance_modes[PLATFORM_PROFILE_PERFORMANCE] !=
+ PERFORMANCE_MODE_UNKNOWN)
+ mode_profile =
PLATFORM_PROFILE_BALANCED_PERFORMANCE;
+ else /* otherwise map it to performance instead */
+ mode_profile = PLATFORM_PROFILE_PERFORMANCE;
+ break;
+
+ case PERFORMANCE_MODE_SILENT:
+ /* silent always maps to low-power */
+ mode_profile = PLATFORM_PROFILE_LOW_POWER;
+ break;
+
+ case PERFORMANCE_MODE_QUIET:
+ /* if silent exists, map quiet to quiet */
+ if
(galaxybook->profile_performance_modes[PLATFORM_PROFILE_LOW_POWER] !=
+ PERFORMANCE_MODE_UNKNOWN)
+ mode_profile = PLATFORM_PROFILE_QUIET;
+ else /* otherwise map it to low-power for better
userspace tool support */
+ mode_profile = PLATFORM_PROFILE_LOW_POWER;
+ break;
+
+ case PERFORMANCE_MODE_OPTIMIZED:
+ /* optimized always maps to balanced */
+ mode_profile = PLATFORM_PROFILE_BALANCED;
+ break;
+
+ case PERFORMANCE_MODE_PERFORMANCE_LEGACY:
+ /* map to performance if performance is not already
supported */
+ if
(galaxybook->profile_performance_modes[PLATFORM_PROFILE_PERFORMANCE] ==
+ PERFORMANCE_MODE_UNKNOWN)
+ mode_profile = PLATFORM_PROFILE_PERFORMANCE;
+ else /* otherwise, ignore */
+ mode_profile = IGNORE_PERFORMANCE_MODE_MAPPING;
+ break;
+
+ case PERFORMANCE_MODE_OPTIMIZED_LEGACY:
+ /* map to balanced if balanced is not already supported
*/
+ if
(galaxybook->profile_performance_modes[PLATFORM_PROFILE_BALANCED] ==
+ PERFORMANCE_MODE_UNKNOWN)
+ mode_profile = PLATFORM_PROFILE_BALANCED;
+ else /* otherwise, ignore */
+ mode_profile = IGNORE_PERFORMANCE_MODE_MAPPING;
+ break;
+
+ default: /* any other value is not supported */
+ mode_profile = IGNORE_PERFORMANCE_MODE_MAPPING;
+ break;
+ }
+
+ /* if current mode value mapped to a supported
platform_profile_option, set it up */
+ if (mode_profile != IGNORE_PERFORMANCE_MODE_MAPPING) {
+ mapped_profiles++;
+ galaxybook->profile_performance_modes[mode_profile] =
buf.iob_values[i];
+ set_bit(mode_profile,
galaxybook->profile_handler.choices);
+ dev_dbg(&galaxybook->platform->dev,
+ "will support platform profile %d (performance mode
0x%x)\n",
+ mode_profile, buf.iob_values[i]);
+ } else {
+ dev_dbg(&galaxybook->platform->dev,
+ "unmapped performance mode 0x%x will be
ignored\n",
+ buf.iob_values[i]);
+ }
+ }
+
+ if (mapped_profiles == 0)
+ return -ENODEV;
+
+ err = platform_profile_register(&galaxybook->profile_handler);
Please update the code to conform to the updated platform profile API.
+ if (err)
+ return err;
+
+ /* now check currently set performance mode; if not supported then set
default profile */
+ err = performance_mode_acpi_get(galaxybook, ¤t_performance_mode);
+ if (err)
+ goto err_remove_exit;
+ err = get_performance_mode_profile(galaxybook,
current_performance_mode, NULL);
+ if (err) {
+ dev_dbg(&galaxybook->platform->dev,
+ "initial performance mode value is not supported by device;
"
+ "setting to default\n");
+ err =
galaxybook_platform_profile_set(&galaxybook->profile_handler,
+ DEFAULT_PLATFORM_PROFILE);
+ if (err)
+ goto err_remove_exit;
+ }
+
+ /* if adding dev remove action fails, remove now and return failure */
+ err = devm_add_action_or_reset(&galaxybook->platform->dev,
+ galaxybook_profile_exit, galaxybook);
+ if (err)
+ goto err_remove_exit;
+
+ return 0;
+
+err_remove_exit:
+ galaxybook_profile_exit(galaxybook);
+ return err;
The error handling is a bit strange.
Please try to set the default platform profile first before registering the
platform profile interface,
then register the platform profile interface and use devm_add_action_or_reset().
+}
+
+/*
+ * Hotkey work and filters
+ */
+
+static void galaxybook_kbd_backlight_hotkey_work(struct work_struct *work)
+{
+ struct samsung_galaxybook *galaxybook =
+ container_of(work, struct samsung_galaxybook,
kbd_backlight_hotkey_work);
+
+ if (galaxybook->kbd_backlight.brightness <
galaxybook->kbd_backlight.max_brightness)
+ kbd_backlight_acpi_set(galaxybook,
galaxybook->kbd_backlight.brightness + 1);
+ else
+ kbd_backlight_acpi_set(galaxybook, 0);
+
+ led_classdev_notify_brightness_hw_changed(
+ &galaxybook->kbd_backlight,
+ galaxybook->kbd_backlight.brightness);
This is the exact reason why i think this should be done in userspace. You can
replace this code
with a simple input event submission using the KBDILLUM* key codes. This would
also allow you to
avoid any special locking in this case.
This would also allow userspace to configure the step with of the brightness
changes.
+}
+
+static void galaxybook_allow_recording_hotkey_work(struct work_struct *work)
+{
+ struct samsung_galaxybook *galaxybook =
+ container_of(work, struct samsung_galaxybook,
allow_recording_hotkey_work);
+ bool value;
+
+ allow_recording_acpi_get(galaxybook, &value);
+ allow_recording_acpi_set(galaxybook, !value);
Please add some locking here, the value of "allow recording" might have been
changed by another
thread in the mid of those two function calls.
+}
+
+static bool galaxybook_i8042_filter(unsigned char data, unsigned char str,
struct serio *port)
+{
+ static bool extended;
+
+ if (str & I8042_STR_AUXDATA)
+ return false;
+
+ if (unlikely(data == 0xe0)) {
+ extended = true;
+ return true;
+ } else if (unlikely(extended)) {
+ extended = false;
+ switch (data) {
+
+ case GB_KEY_KBD_BACKLIGHT_KEYDOWN:
+ return true;
+ case GB_KEY_KBD_BACKLIGHT_KEYUP:
+ if (kbd_backlight)
+
schedule_work(&galaxybook_ptr->kbd_backlight_hotkey_work);
+ return true;
+
+ case GB_KEY_ALLOW_RECORDING_KEYDOWN:
+ return true;
+ case GB_KEY_ALLOW_RECORDING_KEYUP:
+ if (allow_recording)
+
schedule_work(&galaxybook_ptr->allow_recording_hotkey_work);
+ return true;
+
+ default:
+ /*
+ * Report the previously filtered e0 before continuing
+ * with the next non-filtered byte.
+ */
+ serio_interrupt(port, 0xe0, 0);
+ return false;
+ }
+ }
+
+ return false;
+}
+
+static void galaxybook_i8042_filter_remove(void *data)
+{
+ struct samsung_galaxybook *galaxybook = data;
+
+ i8042_remove_filter(galaxybook_i8042_filter);
+ cancel_work_sync(&galaxybook->kbd_backlight_hotkey_work);
+ cancel_work_sync(&galaxybook->allow_recording_hotkey_work);
+}
+
+static int galaxybook_i8042_filter_install(struct samsung_galaxybook
*galaxybook)
+{
+ int err;
+
+ /* initialize hotkey work queues */
+ if (kbd_backlight)
+ INIT_WORK(&galaxybook->kbd_backlight_hotkey_work,
+ galaxybook_kbd_backlight_hotkey_work);
+ if (allow_recording)
+ INIT_WORK(&galaxybook->allow_recording_hotkey_work,
+ galaxybook_allow_recording_hotkey_work);
+
+ err = i8042_install_filter(galaxybook_i8042_filter);
+ if (err) {
+ cancel_work_sync(&galaxybook->kbd_backlight_hotkey_work);
+ cancel_work_sync(&galaxybook->allow_recording_hotkey_work);
+ return err;
+ }
No work should be active should i8042_install_filter fail.
+
+ /* if adding dev remove action fails, remove now and return failure */
+ err = devm_add_action_or_reset(&galaxybook->platform->dev,
+ galaxybook_i8042_filter_remove,
galaxybook);
+ if (err) {
+ galaxybook_i8042_filter_remove(galaxybook);
This will be called automatically be devm_add_action_or_reset().
+ return err;
+ }
+
+ return 0;
+}
+
+/*
+ * Input device (hotkeys and notifications)
+ */
+
+static void galaxybook_input_notify(struct samsung_galaxybook *galaxybook, int
event)
+{
+ if (!galaxybook->input)
+ return;
+ mutex_lock(&galaxybook->input_lock);
+ if (!sparse_keymap_report_event(galaxybook->input, event, 1, true))
+ dev_warn(&galaxybook->acpi->dev, "unknown input notification event:
0x%x\n", event);
+ mutex_unlock(&galaxybook->input_lock);
+}
+
+static int galaxybook_input_init(struct samsung_galaxybook *galaxybook)
+{
+ int err;
+
+ galaxybook->input =
devm_input_allocate_device(&galaxybook->platform->dev);
+ if (!galaxybook->input)
+ return -ENOMEM;
+
+ galaxybook->input->name = "Samsung Galaxy Book Extra Buttons";
+ galaxybook->input->phys = DRIVER_NAME "/input0";
+ galaxybook->input->id.bustype = BUS_HOST;
+ galaxybook->input->dev.parent = &galaxybook->platform->dev;
+
+ err = sparse_keymap_setup(galaxybook->input, galaxybook_acpi_keymap,
NULL);
+ if (err)
+ return err;
+
+ return input_register_device(galaxybook->input);
+}
+
+/*
+ * ACPI device setup
+ */
+
+static void galaxybook_acpi_notify(acpi_handle handle, u32 event, void *data)
+{
+ struct samsung_galaxybook *galaxybook = data;
+
+ if (event == ACPI_NOTIFY_HOTKEY_PERFORMANCE_MODE) {
+ if (performance_mode) {
+ platform_profile_cycle();
+ goto exit;
+ }
+ }
+
+ galaxybook_input_notify(galaxybook, event);
+
+exit:
+ acpi_bus_generate_netlink_event(DRIVER_NAME,
dev_name(&galaxybook->platform->dev),
+ event, 0);
+}
+
+static int galaxybook_enable_acpi_notify(struct samsung_galaxybook *galaxybook)
+{
+ struct sawb buf = { 0 };
+ int err;
+
+ err = galaxybook_enable_acpi_feature(galaxybook, SASB_NOTIFICATIONS);
+ if (err)
+ return err;
+
+ buf.safn = SAFN;
+ buf.sasb = SASB_NOTIFICATIONS;
+ buf.gunm = GUNM_ACPI_NOTIFY_ENABLE;
+ buf.guds[0] = GUDS_ACPI_NOTIFY_ENABLE;
+
+ return galaxybook_acpi_method(galaxybook, ACPI_METHOD_SETTINGS, &buf,
SAWB_LEN_SETTINGS,
+ "activate ACPI notifications", &buf);
+}
+
+static void galaxybook_acpi_remove_notify_handler(void *data)
+{
+ struct samsung_galaxybook *galaxybook = data;
+
+ acpi_remove_notify_handler(galaxybook->acpi->handle, ACPI_ALL_NOTIFY,
+ galaxybook_acpi_notify);
+}
+
+static void galaxybook_acpi_disable(void *data)
+{
+ struct samsung_galaxybook *galaxybook = data;
+
+ acpi_execute_simple_method(galaxybook->acpi->handle,
+ ACPI_METHOD_ENABLE, ACPI_METHOD_ENABLE_OFF);
+}
+
+static int galaxybook_acpi_init(struct samsung_galaxybook *galaxybook)
+{
+ acpi_status status;
+ int err;
+
+ status = acpi_execute_simple_method(galaxybook->acpi->handle,
ACPI_METHOD_ENABLE,
+ ACPI_METHOD_ENABLE_ON);
+ if (ACPI_FAILURE(status))
+ return -ENXIO;
-EIO please.
+ err = devm_add_action_or_reset(&galaxybook->platform->dev,
+ galaxybook_acpi_disable, galaxybook);
+ if (err)
+ return err;
+
+ status = acpi_install_notify_handler(galaxybook->acpi->handle,
ACPI_ALL_NOTIFY,
+ galaxybook_acpi_notify,
galaxybook);
+ if (ACPI_FAILURE(status))
+ return -ENXIO;
Same as above.
+ err = devm_add_action_or_reset(&galaxybook->platform->dev,
+ galaxybook_acpi_remove_notify_handler,
galaxybook);
+ if (err)
+ return err;
+
+ err = galaxybook_enable_acpi_notify(galaxybook);
+ if (err) {
+ dev_warn(&galaxybook->platform->dev, "failed to enable ACPI
notifications; "
+ "some hotkeys will not be supported\n");
+ } else {
+ err = galaxybook_input_init(galaxybook);
+ if (err)
+ dev_warn(&galaxybook->platform->dev,
+ "failed to initialize input device\n");
You should initialize the input device before registering the i8042 filter and
the ACPI notify handler,
or else they might try to submit input events on a allocated but
not-yet-registered input device.
Also please call galaxybook_enable_acpi_notify() after registering the input
device.
+ }
+
+ return 0;
+}
+
+/*
+ * Platform driver
+ */
+
+#define galaxybook_init_feature(module_param, init_func)
\
+do {
\
+ if (module_param) {
\
+ err = init_func(galaxybook);
\
+ if (err) {
\
+ dev_dbg(&galaxybook->platform->dev, \
+ "failed to initialize " #module_param "\n");
\
+ module_param = false;
\
+ }
\
+ }
\
+} while (0)
See checkpatch for complains about this. Also i would prefer if you drop this
macro.
+
+static int galaxybook_probe(struct platform_device *pdev)
+{
+ struct acpi_device *adev = ACPI_COMPANION(&pdev->dev);
+ struct samsung_galaxybook *galaxybook;
+ int err;
+
+ if (!adev)
+ return -ENODEV;
+
+ dev_dbg(&pdev->dev, "loading driver\n");
+
+ galaxybook = devm_kzalloc(&pdev->dev, sizeof(*galaxybook), GFP_KERNEL);
+ if (!galaxybook)
+ return -ENOMEM;
+ /* set static pointer here so it can be used in i8042 filter */
+ galaxybook_ptr = galaxybook;
Please check if this pointer is already set and return -EBUSY in such a case.
+
+ galaxybook->platform = pdev;
+ galaxybook->acpi = adev;
You can also just store pdev->dev and the ACPI handle here.
+
+ dev_set_drvdata(&galaxybook->platform->dev, galaxybook);
+ devm_mutex_init(&galaxybook->platform->dev, &galaxybook->acpi_lock);
+ devm_mutex_init(&galaxybook->platform->dev, &galaxybook->input_lock);
Missing error handling here.
+
+ err = galaxybook_acpi_init(galaxybook);
+ if (err) {
+ dev_err(&galaxybook->acpi->dev, "failed to initialize the ACPI
device\n");
+ return err;
+ }
+
+ err = galaxybook_enable_acpi_feature(galaxybook, SASB_POWER_MANAGEMENT);
+ if (err) {
+ dev_warn(&galaxybook->acpi->dev,
+ "failed to initialize ACPI power management features; "
+ "many features of this driver will not be
available\n");
+ performance_mode = false;
+ battery_threshold = false;
+ }
+
+ galaxybook_init_feature(performance_mode, galaxybook_profile_init);
+ galaxybook_init_feature(battery_threshold,
galaxybook_battery_threshold_init);
+
+ /* add attrs group here as the is_visible requires above
initializations */
+ err = devm_device_add_group(&galaxybook->platform->dev,
&galaxybook_attrs_group);
+ if (err)
+ dev_warn(&galaxybook->platform->dev, "failed to add platform device
attributes\n");
When using .dev_groups the driver core will registers those after the probe
callback returns, so please
use .dev_groups.
+
+ galaxybook_init_feature(kbd_backlight, galaxybook_kbd_backlight_init);
+
+ /* i8042_filter should be disabled if kbd_backlight and allow_recording
are disabled */
+ if (!kbd_backlight && !allow_recording)
+ i8042_filter = false;
+
+ galaxybook_init_feature(i8042_filter, galaxybook_i8042_filter_install);
Does installing the i8042 filter involve any IO? If no then please fail probing
if an error
occurs here.
I think with would make sense to do this printing inside the initialization
functions. They can also
return 0 instead of an error when they determine that the feature is simply not
available on a given machine
so that all real errors can be treated as such and result in an probe failure.
I think the dell-wmi-ddv driver does something similar.
+
+ dev_dbg(&galaxybook->platform->dev, "driver successfully loaded\n");
+
+ return 0;
+}
+
+static void galaxybook_remove(struct platform_device *pdev)
+{
+ struct samsung_galaxybook *galaxybook = dev_get_drvdata(&pdev->dev);
+
+ if (galaxybook_ptr)
+ galaxybook_ptr = NULL;
+
+ dev_dbg(&galaxybook->platform->dev, "driver removed\n");
Maybe you should also use devres for this, since this will only get called if
the previous
probe callback was successful.
In general i am very positive about this driver. Nearly all issues are rather
small, so i am
looking forward to the v4 patch series :).
Thanks,
Armin Wolf
+}
+
+static struct platform_driver galaxybook_platform_driver = {
+ .driver = {
+ .name = DRIVER_NAME,
+ .acpi_match_table = galaxybook_device_ids,
+ },
+ .probe = galaxybook_probe,
+ .remove = galaxybook_remove,
+};
+module_platform_driver(galaxybook_platform_driver);
+
+MODULE_AUTHOR("Joshua Grisham <j...@joshuagrisham.com>");
+MODULE_DESCRIPTION("Samsung Galaxy Book Extras");
+MODULE_LICENSE("GPL");
