*Aşağıdaki yapılandırmaya sahip samba (raspbian) ile ilginç bir sorun yaşıyorum. Bir pardus makineden (topluluk ve kurumsal) samba paylaşımına giriş yapmak istediğimde parolayı doğru girmeme rağmen aşağıdaki debuglardaki gibi bir LOGON FAILURE alıyorum. Diğer işletim sistemlerinde Windows, Kali, Centos, Raspbian böyle bir sorun yok. Debug'lardan bir mana çıkartamadım. Böyle birşey başına gelmiş olan var mı?*
*root@tspardus:/home/ozgur# smbclient -d 3 //10.1.1.1/pi <http://10.1.1.1/pi> -U pi* lp_load_ex: refreshing parameters Initialising global parameters params.c:pm_process() - Processing configuration file "/etc/samba/smb.conf" Processing section "[global]" added interface eth0 ip=10.1.1.123 bcast=10.1.1.255 netmask=255.255.255.0 Client started (version 4.1.13-Debian). Enter pi's password: Connecting to 10.1.1.1 at port 445 Doing spnego session setup (blob length=74) got OID=1.3.6.1.4.1.311.2.2.10 got principal=not_defined_in_RFC4178@please_ignore Got challenge flags: Got NTLMSSP neg_flags=0x608a8215 NTLMSSP: Set final flags: Got NTLMSSP neg_flags=0x60088215 NTLMSSP Sign/Seal - Initialising with flags: Got NTLMSSP neg_flags=0x60088215 SPNEGO login failed: Logon failure session setup failed: NT_STATUS_LOGON_FAILURE *root@tspardus:/home/ozgur# smbclient -d 5 //10.1.1.1/pi <http://10.1.1.1/pi> -U pi * INFO: Current debug levels: all: 5 tdb: 5 printdrivers: 5 lanman: 5 smb: 5 rpc_parse: 5 rpc_srv: 5 rpc_cli: 5 passdb: 5 sam: 5 auth: 5 winbind: 5 vfs: 5 idmap: 5 quota: 5 acls: 5 locking: 5 msdfs: 5 dmapi: 5 registry: 5 scavenger: 5 dns: 5 ldb: 5 lp_load_ex: refreshing parameters Initialising global parameters INFO: Current debug levels: all: 5 tdb: 5 printdrivers: 5 lanman: 5 smb: 5 rpc_parse: 5 rpc_srv: 5 rpc_cli: 5 passdb: 5 sam: 5 auth: 5 winbind: 5 vfs: 5 idmap: 5 quota: 5 acls: 5 locking: 5 msdfs: 5 dmapi: 5 registry: 5 scavenger: 5 dns: 5 ldb: 5 params.c:pm_process() - Processing configuration file "/etc/samba/smb.conf" Processing section "[global]" doing parameter workgroup = WORKGROUP doing parameter dns proxy = no doing parameter log file = /var/log/samba/log.%m doing parameter max log size = 1000 doing parameter syslog = 0 doing parameter panic action = /usr/share/samba/panic-action %d doing parameter server role = standalone server doing parameter passdb backend = tdbsam doing parameter obey pam restrictions = yes doing parameter unix password sync = no doing parameter passwd program = /usr/bin/passwd %u doing parameter passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . doing parameter pam password change = yes doing parameter map to guest = bad user doing parameter usershare allow guests = yes pm_process() returned Yes added interface eth0 ip=10.1.1.123 bcast=10.1.1.255 netmask=255.255.255.0 Netbios name list:- my_netbios_names[0]="TSPARDUS" Client started (version 4.1.13-Debian). Enter pi's password: Connecting to 10.1.1.1 at port 445 Socket options: SO_KEEPALIVE = 0 SO_REUSEADDR = 0 SO_BROADCAST = 0 TCP_NODELAY = 1 TCP_KEEPCNT = 9 TCP_KEEPIDLE = 7200 TCP_KEEPINTVL = 75 IPTOS_LOWDELAY = 0 IPTOS_THROUGHPUT = 0 SO_REUSEPORT = 0 SO_SNDBUF = 87040 SO_RCVBUF = 372480 SO_SNDLOWAT = 1 SO_RCVLOWAT = 1 SO_SNDTIMEO = 0 SO_RCVTIMEO = 0 TCP_QUICKACK = 1 TCP_DEFER_ACCEPT = 0 session request ok Doing spnego session setup (blob length=74) got OID=1.3.6.1.4.1.311.2.2.10 got principal=not_defined_in_RFC4178@please_ignore Got challenge flags: Got NTLMSSP neg_flags=0x608a8215 NTLMSSP_NEGOTIATE_UNICODE NTLMSSP_REQUEST_TARGET NTLMSSP_NEGOTIATE_SIGN NTLMSSP_NEGOTIATE_NTLM NTLMSSP_NEGOTIATE_ALWAYS_SIGN NTLMSSP_NEGOTIATE_NTLM2 NTLMSSP_NEGOTIATE_TARGET_INFO NTLMSSP_NEGOTIATE_128 NTLMSSP_NEGOTIATE_KEY_EXCH NTLMSSP: Set final flags: Got NTLMSSP neg_flags=0x60088215 NTLMSSP_NEGOTIATE_UNICODE NTLMSSP_REQUEST_TARGET NTLMSSP_NEGOTIATE_SIGN NTLMSSP_NEGOTIATE_NTLM NTLMSSP_NEGOTIATE_ALWAYS_SIGN NTLMSSP_NEGOTIATE_NTLM2 NTLMSSP_NEGOTIATE_128 NTLMSSP_NEGOTIATE_KEY_EXCH NTLMSSP Sign/Seal - Initialising with flags: Got NTLMSSP neg_flags=0x60088215 NTLMSSP_NEGOTIATE_UNICODE NTLMSSP_REQUEST_TARGET NTLMSSP_NEGOTIATE_SIGN NTLMSSP_NEGOTIATE_NTLM NTLMSSP_NEGOTIATE_ALWAYS_SIGN NTLMSSP_NEGOTIATE_NTLM2 NTLMSSP_NEGOTIATE_128 NTLMSSP_NEGOTIATE_KEY_EXCH SPNEGO login failed: Logon failure session setup failed: NT_STATUS_LOGON_FAILURE *Ağdaki bir windows (7) makineden, vm üzerindeki kali ve centos'tan ve söz konusu samba sunucunun kendi konsolundan sorunsuz giriş yapabiliyorum:* *pi@maket:~ $* smbclient //10.1.1.1/logs -d 2 -U pi added interface eth0 ip=192.168.0.168 bcast=192.168.0.255 netmask=255.255.255.0 added interface eth0 ip=10.1.1.1 bcast=10.1.1.255 netmask=255.255.255.0 added interface wlan0 ip=10.2.2.2 bcast=10.2.2.255 netmask=255.255.255.0 Enter pi's password: Domain=[WORKGROUP] OS=[Unix] Server=[Samba 4.1.17-Debian] smb: \> *pi@maket:~ $ testparm* Load smb config files from /etc/samba/smb.conf Processing section "[www]" Processing section "[logs]" Processing section "[pi]" Loaded services file OK. Server role: ROLE_STANDALONE Press enter to see a dump of your service definitions [global] server string = Maket Samba Server server role = standalone server map to guest = Bad User obey pam restrictions = Yes pam password change = Yes passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . syslog = 10 syslog only = Yes log file = /var/log/samba/log.%m max log size = 1000 load printers = No printcap name = /dev/null disable spoolss = Yes dns proxy = No usershare allow guests = Yes panic action = /usr/share/samba/panic-action %d idmap config * : backend = tdb printing = bsd print command = lpr -r -P'%p' %s lpq command = lpq -P'%p' lprm command = lprm -P'%p' %j [www] comment = Apache public directory path = /var/www/html valid users = pi force user = root force group = root read only = No create mask = 0777 force create mode = 0777 [logs] comment = System logs path = /var/log valid users = pi force user = root force group = root read only = No create mask = 0711 force create mode = 0722 [pi] comment = Pis home path = /home/pi valid users = pi force user = pi force group = pi read only = No *Sorun ne olabilir acaba?* Özgür Koca [tankado.com][raspberry-pi.tankado.com] <http://www.facebook.com/zerostoheroes/>
_______________________________________________ Linux-sohbet mailing list [email protected] https://liste.linux.org.tr/mailman/listinfo/linux-sohbet Liste kurallari: http://liste.linux.org.tr/kurallar.php
