[PATCH 4/9] scsi: hisi_sas: Adjust the printk format of functions hisi_sas_init_device()

[John Garry]

From: Xiang Chen <chenxian...@hisilicon.com>

In function hisi_sas_init_device(), the log is as follows when error for
hardreset:
  hisi_sas_v3_hw 0000:74:02.0: SATA disk hardreset fail: 0xffffffed

Actually if hardreset failed, its return value is negative, so change
the print format from %x to %d.

Signed-off-by: Xiang Chen <chenxian...@hisilicon.com>
Signed-off-by: John Garry <john.ga...@huawei.com>
---
 drivers/scsi/hisi_sas/hisi_sas_main.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c 
b/drivers/scsi/hisi_sas/hisi_sas_main.c
index d4da537f9a45..ede812759991 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -769,8 +769,7 @@ static int hisi_sas_init_device(struct domain_device 
*device)
                }
                sas_put_local_phy(local_phy);
                if (rc) {
-                       dev_warn(dev, "SATA disk hardreset fail: 0x%x\n",
-                                rc);
+                       dev_warn(dev, "SATA disk hardreset fail: %d\n", rc);
                        return rc;
                }
 
-- 
2.17.1