Hi all,
the 'result' field in the SCSI command is defined as having
4 fields. The top byte is declared as a 'driver_byte', where the
driver can signal some internal status back to the midlayer.
However, there is quite a bit of overlap between the driver_byte
and the host_byte, resulting in the driver_byte being used in
very few places, and mostly in legacy drivers.
Additionally, we have _two_ sets of definitions for the
last byte (status byte), which can specified either in SAM terms
or in the linux-specific terms, which are shifted right by one
from the SAM ones.
Needless to say, the linux-specific ones are declared obsolete
for years now.
And to make the confusion complete, both the status byte and
the driver byte have a byte for a valid sense code, resulting
in quite some confusion which of those bits to check.
This patchset does several things:
- remove the linux-specific status byte definitions, and use
the SAM values throughout
- replace the driver-byte values with either SAM ones (for sense
code checking) or host-byte definitions
- remove the driver-byte definitions
As usual, comments and reviews are welcome.
Please note, commit 66cf50e65b18 ("scsi: qla2xxx: fixup incorrect
usage of host_byte") from 5.4/scsi-fixes is a prerequisite for
this patch series.
Hannes Reinecke (24):
aic7xxx,aic79xxx: remove driver-defined SAM status definitions
bfa: drop driver-defined SCSI status codes
wd33c93: use SCSI status
acornscsi: use standard defines
scsi: use standard SAM status codes
scsi: change status_byte() to return the standard SCSI status
target_core: Fixup target_complete_cmd() usage
sg: use SAM status definitions and avoid using masked_status
scsi: Kill obsolete linux-specific status codes
scsi: introduce set_status_byte()
advansys: kill driver_defined status byte accessors
scsi: introduce scsi_build_sense()
scsi: Kill DRIVER_SENSE
scsi: Kill DRIVER_HARD
scsi_error: use DID_TIME_OUT instead of DRIVER_TIMEOUT
scsi: Kill DRIVER_TIMEOUT
scsi: do not use DRIVER_INVALID
st: return error code in st_scsi_execute()
scsi_ioctl: return error code when blk_map_user() fails
scsi_dh_alua: do not interpret DRIVER_ERROR
xen-scsiback: stop using DRIVER_ERROR
scsi: stop using DRIVER_ERROR
scsi: Kill DRIVER_MEDIA, DRIVER_SOFT, and DRIVER_BUSY
scsi: Drop now obsolete driver_byte definitions
Documentation/scsi/scsi_mid_low_api.txt | 3 +-
block/bsg-lib.c | 2 +-
block/bsg.c | 2 +-
block/scsi_ioctl.c | 9 ++--
drivers/ata/libata-scsi.c | 22 +++-----
drivers/infiniband/ulp/srp/ib_srp.c | 2 +-
drivers/message/fusion/mptscsih.c | 2 +-
drivers/s390/scsi/zfcp_scsi.c | 5 +-
drivers/scsi/3w-9xxx.c | 5 +-
drivers/scsi/3w-sas.c | 3 +-
drivers/scsi/3w-xxxx.c | 7 ++-
drivers/scsi/53c700.c | 6 +--
drivers/scsi/NCR5380.c | 4 +-
drivers/scsi/advansys.c | 78 ++++++++---------------------
drivers/scsi/aic7xxx/aic79xx_core.c | 8 +--
drivers/scsi/aic7xxx/aic79xx_osm.c | 35 ++++++-------
drivers/scsi/aic7xxx/aic7xxx_core.c | 6 +--
drivers/scsi/aic7xxx/aic7xxx_osm.c | 13 +++--
drivers/scsi/aic7xxx/aiclib.h | 15 ------
drivers/scsi/arcmsr/arcmsr_hba.c | 5 +-
drivers/scsi/arm/acornscsi.c | 24 +++------
drivers/scsi/arm/fas216.c | 10 ++--
drivers/scsi/bfa/bfa_fc.h | 15 ------
drivers/scsi/bfa/bfa_fcpim.c | 2 +-
drivers/scsi/bfa/bfad_im.c | 4 +-
drivers/scsi/ch.c | 5 +-
drivers/scsi/constants.c | 15 ------
drivers/scsi/cxlflash/superpipe.c | 45 ++++++++---------
drivers/scsi/dc395x.c | 26 +++-------
drivers/scsi/device_handler/scsi_dh_alua.c | 4 --
drivers/scsi/dpt_i2o.c | 2 +-
drivers/scsi/esp_scsi.c | 3 +-
drivers/scsi/gdth.c | 12 ++---
drivers/scsi/hptiop.c | 2 +-
drivers/scsi/libiscsi.c | 5 +-
drivers/scsi/lpfc/lpfc_scsi.c | 30 +++--------
drivers/scsi/megaraid.c | 22 ++++----
drivers/scsi/megaraid/megaraid_mbox.c | 22 ++++----
drivers/scsi/megaraid/megaraid_sas_base.c | 3 +-
drivers/scsi/megaraid/megaraid_sas_fusion.c | 1 -
drivers/scsi/mpt3sas/mpt3sas_scsih.c | 8 +--
drivers/scsi/mvumi.c | 16 +++---
drivers/scsi/myrb.c | 61 ++++++----------------
drivers/scsi/myrs.c | 9 +---
drivers/scsi/ps3rom.c | 3 +-
drivers/scsi/qla2xxx/qla_isr.c | 15 ++----
drivers/scsi/scsi.c | 8 +--
drivers/scsi/scsi_debug.c | 15 +++---
drivers/scsi/scsi_error.c | 52 +++++++++----------
drivers/scsi/scsi_ioctl.c | 2 +-
drivers/scsi/scsi_lib.c | 44 +++++++++++-----
drivers/scsi/scsi_logging.c | 10 +---
drivers/scsi/scsi_scan.c | 2 +-
drivers/scsi/scsi_transport_spi.c | 2 +-
drivers/scsi/sd.c | 42 ++++++++--------
drivers/scsi/sd_zbc.c | 4 +-
drivers/scsi/sg.c | 25 ++++-----
drivers/scsi/smartpqi/smartpqi_init.c | 3 +-
drivers/scsi/sr.c | 2 +-
drivers/scsi/sr_ioctl.c | 2 +-
drivers/scsi/st.c | 8 +--
drivers/scsi/stex.c | 9 ++--
drivers/scsi/sym53c8xx_2/sym_glue.c | 6 +--
drivers/scsi/ufs/ufshcd.c | 6 +--
drivers/scsi/virtio_scsi.c | 3 +-
drivers/scsi/vmw_pvscsi.c | 21 ++++----
drivers/scsi/wd33c93.c | 21 +++-----
drivers/target/loopback/tcm_loop.c | 1 -
drivers/target/target_core_alua.c | 6 +--
drivers/target/target_core_iblock.c | 2 +-
drivers/target/target_core_pr.c | 8 +--
drivers/target/target_core_sbc.c | 10 ++--
drivers/target/target_core_spc.c | 14 +++---
drivers/target/target_core_xcopy.c | 2 +-
drivers/usb/storage/cypress_atacb.c | 4 +-
drivers/xen/xen-scsiback.c | 12 ++---
include/scsi/scsi.h | 19 +------
include/scsi/scsi_cmnd.h | 12 +++--
include/scsi/scsi_proto.h | 19 -------
include/scsi/sg.h | 3 +-
include/trace/events/scsi.h | 15 +-----
81 files changed, 371 insertions(+), 639 deletions(-)
--
2.16.4
