Thanks Roman.
Looks like my system did not had updated 5.4/queue branch, which caused this
hunk failure.
Martin,
I am resending this series after rebasing on your latest 5.4/queue.
Thanks,
Himanshu
On 9/12/19, 11:55 AM, "Roman Bolshakov" <r.bolsha...@yadro.com> wrote:
External Email
----------------------------------------------------------------------
On Thu, Sep 12, 2019 at 08:19:42AM -0700, Himanshu Madhani wrote:
> From: Quinn Tran <qut...@marvell.com>
>
> For N2N, the NPort ID is assigned by driver in the PLOGI ELS.
> According to FW Spec the byte order for SID is not the same as
> DID.
>
> Signed-off-by: Quinn Tran <qut...@marvell.com>
> Signed-off-by: Himanshu Madhani <hmadh...@marvell.com>
> ---
> drivers/scsi/qla2xxx/qla_iocb.c | 7 ++++---
> 1 file changed, 4 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/scsi/qla2xxx/qla_iocb.c
b/drivers/scsi/qla2xxx/qla_iocb.c
> index 1886de92034c..5c279449ca1c 100644
> --- a/drivers/scsi/qla2xxx/qla_iocb.c
> +++ b/drivers/scsi/qla2xxx/qla_iocb.c
> @@ -2696,9 +2696,10 @@ qla24xx_els_logo_iocb(srb_t *sp, struct
els_entry_24xx *els_iocb)
> els_iocb->port_id[0] = sp->fcport->d_id.b.al_pa;
> els_iocb->port_id[1] = sp->fcport->d_id.b.area;
> els_iocb->port_id[2] = sp->fcport->d_id.b.domain;
> - els_iocb->s_id[0] = vha->d_id.b.al_pa;
> - els_iocb->s_id[1] = vha->d_id.b.area;
> - els_iocb->s_id[2] = vha->d_id.b.domain;
> + /* For SID the byte order is different than DID */
> + els_iocb->s_id[1] = vha->d_id.b.al_pa;
> + els_iocb->s_id[2] = vha->d_id.b.area;
> + els_iocb->s_id[0] = vha->d_id.b.domain;
> els_iocb->control_flags = 0;
>
> if (elsio->u.els_logo.els_cmd == ELS_DCMD_PLOGI) {
> --
> 2.12.0
>
Hi,
This one doesn't apply to 5.4/scsi-queue, the hunk lines should be:
@@ -2656,9 +2656,10 @@
Best regards,
Roman
