The qla2xxx driver had this issue as well when the newer array
firmware returned the retry_delay_timer in the fcp_rsp.
The bnx2fc is not handling the masking of the scope bits either
so the retry_delay_timestamp value lands up being a large value
added to the timer timestamp delaying I/O for up to 27 Minutes.
This patch adds similar code to handle this to the
bnx2fc driver to avoid the huge delay.
---
V2. Fix Indent for comments (Chad)
V3. Kbuild robot reported uninitialized variable scope
    Initialize scope to 0

Signed-off-by: Laurence Oberman <lober...@redhat.com>
Reported-by: David Jeffery <djeff...@redhat.com>
Reported-by: kbuild test robot <l...@intel.com>
---
 drivers/scsi/bnx2fc/bnx2fc_io.c | 29 ++++++++++++++++++++++++-----
 1 file changed, 24 insertions(+), 5 deletions(-)

diff --git a/drivers/scsi/bnx2fc/bnx2fc_io.c b/drivers/scsi/bnx2fc/bnx2fc_io.c
index 9e50e5b..579b88d 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_io.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_io.c
@@ -1928,6 +1928,7 @@ void bnx2fc_process_scsi_cmd_compl(struct bnx2fc_cmd 
*io_req,
        struct bnx2fc_rport *tgt = io_req->tgt;
        struct scsi_cmnd *sc_cmd;
        struct Scsi_Host *host;
+       u16 scope = 0, qualifier = 0;
 
 
        /* scsi_cmd_cmpl is called with tgt lock held */
@@ -1997,12 +1998,30 @@ void bnx2fc_process_scsi_cmd_compl(struct bnx2fc_cmd 
*io_req,
 
                        if (io_req->cdb_status == SAM_STAT_TASK_SET_FULL ||
                            io_req->cdb_status == SAM_STAT_BUSY) {
-                               /* Set the jiffies + retry_delay_timer * 100ms
-                                  for the rport/tgt */
-                               tgt->retry_delay_timestamp = jiffies +
-                                       fcp_rsp->retry_delay_timer * HZ / 10;
+                               /* Newer array firmware with BUSY or
+                                * TASK_SET_FULL may return a status that needs
+                                * the scope bits masked.
+                                * Or a huge delay timestamp up to 27 minutes
+                                * can result.
+                                */
+                               if (fcp_rsp->retry_delay_timer) {
+                                       /* Upper 2 bits */
+                                       scope = fcp_rsp->retry_delay_timer
+                                               & 0xC000;
+                                       /* Lower 14 bits */
+                                       qualifier = fcp_rsp->retry_delay_timer
+                                               & 0x3FFF;
+                               }
+                               if (scope > 0 && qualifier > 0 &&
+                                       qualifier <= 0x3FEF) {
+                                       /* Set the jiffies +
+                                        * retry_delay_timer * 100ms
+                                        * for the rport/tgt
+                                        */
+                                       tgt->retry_delay_timestamp = jiffies +
+                                               (qualifier * HZ / 10);
+                               }
                        }
-
                }
                if (io_req->fcp_resid)
                        scsi_set_resid(sc_cmd, io_req->fcp_resid);
-- 
1.8.3.1

Reply via email to