Currently, when lpfc_nvmet_mrq is 0 it could mean 2 different
things depending on when its looked at. If at module load time
it specifies the default number of hardware queues to allocate,
with 0 meaning default to the number of cpu's. But post module
load, a value of zero means to disable mrq use.
Changed the driver so that enablement of mrq is based on whether
nvme target mode is enabled or not. When enabled, mrq is enabled.
Thus, the cfg_nvemt_mrq field only specifies the number of mrq
queues to enable, with 0 defaulting to the number of cpus.
Signed-off-by: Dick Kennedy <dick.kenn...@broadcom.com>
Signed-off-by: James Smart <jsmart2...@gmail.com>
---
drivers/scsi/lpfc/lpfc_attr.c | 3 ++-
drivers/scsi/lpfc/lpfc_init.c | 8 ++++----
drivers/scsi/lpfc/lpfc_nvmet.h | 1 -
3 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index ce3e541434dc..5d6c874c44e7 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -7003,6 +7003,7 @@ lpfc_get_cfgparam(struct lpfc_hba *phba)
if (phba->sli_rev != LPFC_SLI_REV4) {
/* NVME only supported on SLI4 */
phba->nvmet_support = 0;
+ phba->cfg_nvmet_mrq = 0;
phba->cfg_enable_fc4_type = LPFC_ENABLE_FCP;
phba->cfg_enable_bbcr = 0;
phba->cfg_xri_rebalancing = 0;
@@ -7104,7 +7105,7 @@ lpfc_nvme_mod_param_dep(struct lpfc_hba *phba)
} else {
/* Not NVME Target mode. Turn off Target parameters. */
phba->nvmet_support = 0;
- phba->cfg_nvmet_mrq = LPFC_NVMET_MRQ_OFF;
+ phba->cfg_nvmet_mrq = 0;
phba->cfg_nvmet_fb_size = 0;
}
}
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 3e9cc06c3cff..6ff6b39a2688 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -8596,9 +8596,9 @@ lpfc_sli4_queue_verify(struct lpfc_hba *phba)
if (phba->nvmet_support) {
if (phba->cfg_irq_chann < phba->cfg_nvmet_mrq)
phba->cfg_nvmet_mrq = phba->cfg_irq_chann;
+ if (phba->cfg_nvmet_mrq > LPFC_NVMET_MRQ_MAX)
+ phba->cfg_nvmet_mrq = LPFC_NVMET_MRQ_MAX;
}
- if (phba->cfg_nvmet_mrq > LPFC_NVMET_MRQ_MAX)
- phba->cfg_nvmet_mrq = LPFC_NVMET_MRQ_MAX;
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"2574 IO channels: hdwQ %d IRQ %d MRQ: %d\n",
@@ -10729,7 +10729,7 @@ lpfc_sli4_enable_msix(struct lpfc_hba *phba)
phba->cfg_irq_chann, vectors);
if (phba->cfg_irq_chann > vectors)
phba->cfg_irq_chann = vectors;
- if (phba->cfg_nvmet_mrq > vectors)
+ if (phba->nvmet_support && (phba->cfg_nvmet_mrq > vectors))
phba->cfg_nvmet_mrq = vectors;
}
@@ -11286,7 +11286,7 @@ lpfc_get_sli4_parameters(struct lpfc_hba *phba,
LPFC_MBOXQ_t *mboxq)
!phba->nvme_support) {
phba->nvme_support = 0;
phba->nvmet_support = 0;
- phba->cfg_nvmet_mrq = LPFC_NVMET_MRQ_OFF;
+ phba->cfg_nvmet_mrq = 0;
lpfc_printf_log(phba, KERN_ERR, LOG_INIT | LOG_NVME,
"6101 Disabling NVME support: "
"Not supported by firmware: %d %d\n",
diff --git a/drivers/scsi/lpfc/lpfc_nvmet.h b/drivers/scsi/lpfc/lpfc_nvmet.h
index c3ca93d55856..c82212529368 100644
--- a/drivers/scsi/lpfc/lpfc_nvmet.h
+++ b/drivers/scsi/lpfc/lpfc_nvmet.h
@@ -27,7 +27,6 @@
#define LPFC_NVMET_RQE_DEF_COUNT 2048
#define LPFC_NVMET_SUCCESS_LEN 12
-#define LPFC_NVMET_MRQ_OFF 0xffff
#define LPFC_NVMET_MRQ_AUTO 0
#define LPFC_NVMET_MRQ_MAX 16
--
2.13.7
