It used to be that "error" was set to -ENODEV at the start of the
function but we shifted some code around an now "error" is set to
zero for most error paths. There is a mix of direct returns and
"goto out" but I changed everything to direct returns for consistency.
Fixes: 56de8357049c ("scsi: lpfc: fix calls to dma_set_mask_and_coherent()")
Signed-off-by: Dan Carpenter <dan.carpen...@oracle.com>
---
drivers/scsi/lpfc/lpfc_init.c | 16 +++++++++-------
1 file changed, 9 insertions(+), 7 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 3b5873f6751e..f0b9a672f3c3 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -10052,7 +10052,7 @@ lpfc_sli4_pci_mem_setup(struct lpfc_hba *phba)
{
struct pci_dev *pdev = phba->pcidev;
unsigned long bar0map_len, bar1map_len, bar2map_len;
- int error = -ENODEV;
+ int error;
uint32_t if_type;
if (!pdev)
@@ -10071,7 +10071,7 @@ lpfc_sli4_pci_mem_setup(struct lpfc_hba *phba)
*/
if (pci_read_config_dword(pdev, LPFC_SLI_INTF,
&phba->sli4_hba.sli_intf.word0)) {
- return error;
+ return -ENODEV;
}
/* There is no SLI3 failback for SLI4 devices. */
@@ -10081,7 +10081,7 @@ lpfc_sli4_pci_mem_setup(struct lpfc_hba *phba)
"2894 SLI_INTF reg contents invalid "
"sli_intf reg 0x%x\n",
phba->sli4_hba.sli_intf.word0);
- return error;
+ return -ENODEV;
}
if_type = bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf);
@@ -10105,7 +10105,7 @@ lpfc_sli4_pci_mem_setup(struct lpfc_hba *phba)
dev_printk(KERN_ERR, &pdev->dev,
"ioremap failed for SLI4 PCI config "
"registers.\n");
- goto out;
+ return -ENODEV;
}
phba->pci_bar0_memmap_p = phba->sli4_hba.conf_regs_memmap_p;
/* Set up BAR0 PCI config space register memory map */
@@ -10116,7 +10116,7 @@ lpfc_sli4_pci_mem_setup(struct lpfc_hba *phba)
if (if_type >= LPFC_SLI_INTF_IF_TYPE_2) {
dev_printk(KERN_ERR, &pdev->dev,
"FATAL - No BAR0 mapping for SLI4, if_type 2\n");
- goto out;
+ return -ENODEV;
}
phba->sli4_hba.conf_regs_memmap_p =
ioremap(phba->pci_bar0_map, bar0map_len);
@@ -10124,7 +10124,7 @@ lpfc_sli4_pci_mem_setup(struct lpfc_hba *phba)
dev_printk(KERN_ERR, &pdev->dev,
"ioremap failed for SLI4 PCI config "
"registers.\n");
- goto out;
+ return -ENODEV;
}
lpfc_sli4_bar0_register_memmap(phba, if_type);
}
@@ -10170,6 +10170,7 @@ lpfc_sli4_pci_mem_setup(struct lpfc_hba *phba)
if (!phba->sli4_hba.drbl_regs_memmap_p) {
dev_err(&pdev->dev,
"ioremap failed for SLI4 HBA doorbell registers.\n");
+ error = -ENOMEM;
goto out_iounmap_conf;
}
phba->pci_bar2_memmap_p = phba->sli4_hba.drbl_regs_memmap_p;
@@ -10219,6 +10220,7 @@ lpfc_sli4_pci_mem_setup(struct lpfc_hba *phba)
if (!phba->sli4_hba.dpp_regs_memmap_p) {
dev_err(&pdev->dev,
"ioremap failed for SLI4 HBA dpp registers.\n");
+ error = -ENOMEM;
goto out_iounmap_ctrl;
}
phba->pci_bar4_memmap_p = phba->sli4_hba.dpp_regs_memmap_p;
@@ -10249,7 +10251,7 @@ lpfc_sli4_pci_mem_setup(struct lpfc_hba *phba)
iounmap(phba->sli4_hba.ctrl_regs_memmap_p);
out_iounmap_conf:
iounmap(phba->sli4_hba.conf_regs_memmap_p);
-out:
+
return error;
}
--
2.17.1
