From: Xiang Chen <chenxian...@hisilicon.com>
Sht->sg_tablesize is set in the driver, and it will be assigned to
shost->sg_tablesize in SCSI mid-layer. So it is not necessary to
assign shost->sg_table one more time in the driver.
In addition to the change, change each scsi_host_template.sg_tablesize
to HISI_SAS_SGE_PAGE_CNT instead of SG_ALL.
Signed-off-by: Xiang Chen <chenxian...@hisilicon.com>
Signed-off-by: John Garry <john.ga...@huawei.com>
---
drivers/scsi/hisi_sas/hisi_sas_main.c | 1 -
drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 2 +-
drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 2 +-
drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 3 +--
4 files changed, 3 insertions(+), 5 deletions(-)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c
b/drivers/scsi/hisi_sas/hisi_sas_main.c
index d13a662..cbda48e 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -2410,7 +2410,6 @@ int hisi_sas_probe(struct platform_device *pdev,
shost->max_lun = ~0;
shost->max_channel = 1;
shost->max_cmd_len = 16;
- shost->sg_tablesize = min_t(u16, SG_ALL, HISI_SAS_SGE_PAGE_CNT);
if (hisi_hba->hw->slot_index_alloc) {
shost->can_queue = hisi_hba->hw->max_command_entries;
shost->cmd_per_lun = hisi_hba->hw->max_command_entries;
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
index d24342b..2d035cc 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
@@ -1815,7 +1815,7 @@ static int hisi_sas_v1_init(struct hisi_hba *hisi_hba)
.change_queue_depth = sas_change_queue_depth,
.bios_param = sas_bios_param,
.this_id = -1,
- .sg_tablesize = SG_ALL,
+ .sg_tablesize = HISI_SAS_SGE_PAGE_CNT,
.max_sectors = SCSI_DEFAULT_MAX_SECTORS,
.use_clustering = ENABLE_CLUSTERING,
.eh_device_reset_handler = sas_eh_device_reset_handler,
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
index e78a97e..79e58a7 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
@@ -3570,7 +3570,7 @@ struct device_attribute *host_attrs_v2_hw[] = {
.change_queue_depth = sas_change_queue_depth,
.bios_param = sas_bios_param,
.this_id = -1,
- .sg_tablesize = SG_ALL,
+ .sg_tablesize = HISI_SAS_SGE_PAGE_CNT,
.max_sectors = SCSI_DEFAULT_MAX_SECTORS,
.use_clustering = ENABLE_CLUSTERING,
.eh_device_reset_handler = sas_eh_device_reset_handler,
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index 7e2b020..8a08078 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -2224,7 +2224,7 @@ struct device_attribute *host_attrs_v3_hw[] = {
.change_queue_depth = sas_change_queue_depth,
.bios_param = sas_bios_param,
.this_id = -1,
- .sg_tablesize = SG_ALL,
+ .sg_tablesize = HISI_SAS_SGE_PAGE_CNT,
.max_sectors = SCSI_DEFAULT_MAX_SECTORS,
.use_clustering = ENABLE_CLUSTERING,
.eh_device_reset_handler = sas_eh_device_reset_handler,
@@ -2366,7 +2366,6 @@ struct device_attribute *host_attrs_v3_hw[] = {
shost->max_lun = ~0;
shost->max_channel = 1;
shost->max_cmd_len = 16;
- shost->sg_tablesize = min_t(u16, SG_ALL, HISI_SAS_SGE_PAGE_CNT);
shost->can_queue = hisi_hba->hw->max_command_entries -
HISI_SAS_RESERVED_IPTT_CNT;
shost->cmd_per_lun = hisi_hba->hw->max_command_entries -
--
1.9.1
