The driver fails to set the correct queue depth for native devices, due to failing to set the device type prior to calling aac_set_safw_target_qd(). This results in slave configure setting the queue depth to 1.
This causes around 30% performance degradation. Fixed by setting the dev type before trying to set queue depth. Reported-by: Steve Best <[email protected]> Fixes: 0bcb45fb20c2a ("scsi: aacraid: Add helper function to set queue depth") cc: [email protected] Signed-off-by: Raghava Aditya Renukunta <[email protected]> Reviewed-by: David Carroll <[email protected]> --- drivers/scsi/aacraid/aachba.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c index a9831bd37a73..a57f3a7d4748 100644 --- a/drivers/scsi/aacraid/aachba.c +++ b/drivers/scsi/aacraid/aachba.c @@ -1974,7 +1974,6 @@ static void aac_set_safw_attr_all_targets(struct aac_dev *dev) u32 lun_count, nexus; u32 i, bus, target; u8 expose_flag, attribs; - u8 devtype; lun_count = aac_get_safw_phys_lun_count(dev); @@ -1992,23 +1991,23 @@ static void aac_set_safw_attr_all_targets(struct aac_dev *dev) continue; if (expose_flag != 0) { - devtype = AAC_DEVTYPE_RAID_MEMBER; - goto update_devtype; + dev->hba_map[bus][target].devtype = + AAC_DEVTYPE_RAID_MEMBER; + continue; } if (nexus != 0 && (attribs & 8)) { - devtype = AAC_DEVTYPE_NATIVE_RAW; + dev->hba_map[bus][target].devtype = + AAC_DEVTYPE_NATIVE_RAW; dev->hba_map[bus][target].rmw_nexus = nexus; } else - devtype = AAC_DEVTYPE_ARC_RAW; + dev->hba_map[bus][target].devtype = + AAC_DEVTYPE_ARC_RAW; dev->hba_map[bus][target].scan_counter = dev->scan_counter; aac_set_safw_target_qd(dev, bus, target); - -update_devtype: - dev->hba_map[bus][target].devtype = devtype; } }
