On 12/15/2017 07:17 PM, Steffen Maier wrote:
> Just a few very early view-only review comments.
> Haven't run the code.
>
> On 12/14/2017 11:11 AM, Hannes Reinecke wrote:
>> The 'native LUN' feature allows virtio-scsi to pass in the LUN
>> numbers from the underlying storage directly, without having
>> to modify the LUN number itself.
>> It works by shifting the existing LUN number down by 8 bytes,
>> and add the virtio-specific 8-byte LUN steering header.
>> With that virtio doesn't have to mangle the LUN number, allowing
>> us to pass the 'real' LUN number to the guest.
>
> I only see shifts by 16 bits in the code below which would be 2 bytes.
> I had a quick look at the corresponding qemu code which looked the same
> to me.
> What's the relation to 8 byte shifting, which would be 64 bit shift and
> thus odd for a 64 bit LUN, mentioned in the description here?
>
> If the code keeps the LUN level 1 and 2 (dropping level 3 and 4) and I
> just don't understand it, it would be fine, I guess.
>
Yeah, messed that one up. It should be 8 _bits_, obviously.
>> Of course, we do cut off the last 8 bytes of the 'real' LUN number,
>> but I'm not aware of any array utilizing that, so the impact should
>> be negligible.
>
> Why did we do v3.17 commit 9cb78c16f5da ("scsi: use 64-bit LUNs")? ;-)
>
Because that patch just lifts the internal code to use 64-bit LUNs
without any changes to the behaviour.
This one uses the internal 64-bit LUNs and actually changes the behaviour.
>> Signed-off-by: Hannes Reinecke <[email protected]>
>> ---
>> drivers/scsi/virtio_scsi.c | 62
>> ++++++++++++++++++++++++++++++----------
>> include/uapi/linux/virtio_scsi.h | 1 +
>> 2 files changed, 48 insertions(+), 15 deletions(-)
>>
>> diff --git a/drivers/scsi/virtio_scsi.c b/drivers/scsi/virtio_scsi.c
>> index f925fbd..63c2c85 100644
>> --- a/drivers/scsi/virtio_scsi.c
>> +++ b/drivers/scsi/virtio_scsi.c
>> @@ -356,8 +356,12 @@ static void
>> virtscsi_handle_transport_reset(struct virtio_scsi *vscsi,
>> struct scsi_device *sdev;
>> struct Scsi_Host *shost = virtio_scsi_host(vscsi->vdev);
>> unsigned int target = event->lun[1];
>> - unsigned int lun = (event->lun[2] << 8) | event->lun[3];
>> + u64 lun;
>>
>> + if (virtio_has_feature(vscsi->vdev, VIRTIO_SCSI_F_NATIVE_LUN))
>> + lun = scsilun_to_int((struct scsi_lun *)event->lun) >> 16;
>> + else
>> + lun = (event->lun[2] << 8) | event->lun[3];
>
>
>> @@ -524,10 +532,16 @@ static void virtio_scsi_init_hdr(struct
>> virtio_device *vdev,
>> int target_id,
>> struct scsi_cmnd *sc)
>> {
>> - cmd->lun[0] = 1;
>> - cmd->lun[1] = target_id;
>> - cmd->lun[2] = (sc->device->lun >> 8) | 0x40;
>> - cmd->lun[3] = sc->device->lun & 0xff;
>> + if (virtio_has_feature(vdev, VIRTIO_SCSI_F_NATIVE_LUN)) {
>> + u64 lun = sc->device->lun << 16;
>> + lun |= ((u64)1 << 8) | (u64)target_id;
>> + int_to_scsilun(lun, (struct scsi_lun *)&cmd->lun);
>> + } else {
>> + cmd->lun[0] = 1;
>> + cmd->lun[1] = target_id;
>> + cmd->lun[2] = (sc->device->lun >> 8) | 0x40;
>> + cmd->lun[3] = sc->device->lun & 0xff;
>> + }
>
> Above 2 patterns seem to repeat. Have helper functions (similar to
> int_to_scsilun()) now that it's more than just 4 lines of filling in the
> virtio lun?
>
Yes, can do.
>> @@ -851,10 +871,18 @@ static int virtscsi_abort(struct scsi_cmnd *sc)
>> .subtype = VIRTIO_SCSI_T_TMF_ABORT_TASK,
>
>> .lun[0] = 1,
>> .lun[1] = target_id,
>
> drop those 2 superfluous lines, too?
>
Hmm. Will be checking.
>> - .lun[2] = (sc->device->lun >> 8) | 0x40,
>> - .lun[3] = sc->device->lun & 0xff,
>> .tag = cpu_to_virtio64(vscsi->vdev, (unsigned long)sc),
>> };
>> + if (virtio_has_feature(vscsi->vdev, VIRTIO_SCSI_F_NATIVE_LUN)) {
>> + u64 lun = sc->device->lun << 16;
>> + lun |= ((u64)1 << 8) | (u64)target_id;
>> + int_to_scsilun(lun, (struct scsi_lun *)&cmd->req.tmf.lun);
>> + } else {
>> + cmd->req.tmf.lun[0] = 1;
>> + cmd->req.tmf.lun[1] = target_id;
>> + cmd->req.tmf.lun[2] = (sc->device->lun >> 8) | 0x40;
>> + cmd->req.tmf.lun[3] = sc->device->lun & 0xff;
>> + }
>
>> return virtscsi_tmf(vscsi, cmd);
>> }
>>
>> @@ -1429,7 +1457,10 @@ static int virtscsi_probe(struct virtio_device
>> *vdev)
>> /* LUNs > 256 are reported with format 1, so they go in the range
>> * 16640-32767.
>> */
>
> Above old comment now only seems to apply to the then case of the
> following if statement, not to the else case.
>
Yes.
Will be doing a respin.
Cheers,
Hannes
--
Dr. Hannes Reinecke Teamlead Storage & Networking
[email protected] +49 911 74053 688
SUSE LINUX GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: F. Imendörffer, J. Smithard, J. Guild, D. Upmanyu, G. Norton
HRB 21284 (AG Nürnberg)