On 12/09/2017 02:18 AM, James Smart wrote: > When enabled for both SCSI and NVME support, and connected pt2pt to a > SCSI only target, the driver nodelist entry for the remote port is > left in PRLI_ISSUE state and no SCSI LUNs are discovered. Works fine > if only configured for SCSI support. > > Error was due to some of the prli points still reflecting the need > to send only 1 PRLI. On a lot of fabric configs, targets were NVME > only, which meant the fabric-reported protocol attributes were only > telling the driver one protocol or the other. Thus things worked > fine. With pt2pt, the driver must send a PRLI for both protocols as > there are no hints on what the target supports. Thus pt2pt targets > were hitting the multiple PRLI issues. > > Complete the dual PRLI support. Track explicitly whether scsi (fcp) > or nvme prli's have been sent. Accurately track protocol support > detected on each node as reported by the fabric or probed by PRLI > traffic. > > Signed-off-by: Dick Kennedy <[email protected]> > Signed-off-by: James Smart <[email protected]> > --- > drivers/scsi/lpfc/lpfc_ct.c | 1 + > drivers/scsi/lpfc/lpfc_els.c | 30 ++++++++++++++++++++---------- > drivers/scsi/lpfc/lpfc_nportdisc.c | 30 +++++++++++++----------------- > 3 files changed, 34 insertions(+), 27 deletions(-) > Reviewed-by: Hannes Reinecke <[email protected]>
Cheers, Hannes -- Dr. Hannes Reinecke Teamlead Storage & Networking [email protected] +49 911 74053 688 SUSE LINUX GmbH, Maxfeldstr. 5, 90409 Nürnberg GF: F. Imendörffer, J. Smithard, J. Guild, D. Upmanyu, G. Norton HRB 21284 (AG Nürnberg)
