----- Original Message -----
> From: "Laurence Oberman" <[email protected]>
> To: "Chad Dupuis" <[email protected]>, "Himanshu Madhani"
> <[email protected]>
> Cc: "Linux SCSI List" <[email protected]>
> Sent: Sunday, March 12, 2017 7:39:23 AM
> Subject: 4.10+ qla2xxx driver wont load for qla2xxx (ISP2532-based 8Gb) with
> BAR 3 error, work fine on 4.9
>
> Chad, Himanshu
>
> Before I bisect or go chase changes, wanted to reach out because the driver
> seems to be the same version.
> Perhaps this is a PCIE change in the kernel for 4.10 affecting the load.
> Its the same targetLIO server I have been using for a long time with 4.9
>
> 27:00.0 Fibre Channel: QLogic Corp. ISP2532-based 8Gb Fibre Channel to PCI
> Express HBA (rev 02)
>
> With 4.9 I have no issues loading the driver for my targetLIO server.
> (DL380G8)
>
> # modinfo qla2xxx | more
> filename:
> /lib/modules/4.9.0.lobetcm+/kernel/drivers/scsi/qla2xxx/qla2xxx.ko
> firmware: ql2500_fw.bin
> version: 8.07.00.38-k
> license: GPL
> description: QLogic Fibre Channel HBA Driver
> author: QLogic Corporation
> srcversion: 94A8431A85BFF854B97B02D
>
> [ 8.906351] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA
> Driver: 8.07.00.38-k.
> [ 10.014052] qla2xxx [0000:27:00.0]-001d: : Found an ISP2532 irq 106 iobase
> 0xffffadce989a1000.
> [ 10.455108] scsi host4: qla2xxx
> [ 10.460206] qla2xxx [0000:27:00.0]-00fb:4: QLogic QLE2562 - PCI-Express
> Dual Channel 8Gb Fibre Channel HBA.
> [ 10.460215] qla2xxx [0000:27:00.0]-00fc:4: ISP2532: PCIe (5.0GT/s x8) @
> 0000:27:00.0 hdma+ host#=4 fw=8.03.00 (90d5).
> [ 10.460545] qla2xxx [0000:27:00.1]-001d: : Found an ISP2532 irq 110 iobase
> 0xffffadce989a9000.
> [ 10.662120] scsi host5: qla2xxx
> [ 11.007841] qla2xxx [0000:27:00.1]-00fb:5: QLogic QLE2562 - PCI-Express
> Dual Channel 8Gb Fibre Channel HBA.
> [ 11.007849] qla2xxx [0000:27:00.1]-00fc:5: ISP2532: PCIe (5.0GT/s x8) @
> 0000:27:00.1 hdma+ host#=5 fw=8.03.00 (90d5).
>
> Rebooting on the same server with 4.10 fails to load
>
> Linux 4.10.0+
> # modinfo qla2xxx | more
> filename: /lib/modules/4.10.0+/kernel/drivers/scsi/qla2xxx/qla2xxx.ko
> firmware: ql2500_fw.bin
> version: 8.07.00.38-k
> license: GPL
> description: QLogic Fibre Channel HBA Driver
> author: QLogic Corporation
> srcversion: 939E0595E8A3C2E1BE94392
>
> [ 8.754040] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA
> Driver: 8.07.00.38-k.
> [ 9.979523] qla2xxx [0000:27:00.0]-001b: : BAR 3 not enabled.
> [ 10.201268] qla2xxx [0000:27:00.0]-001d: : Found an ISP2532 irq 110 iobase
> 0xffffacbf189b1000.
> [ 10.407865] scsi host5: qla2xxx
> [ 10.444281] qla2xxx: probe of 0000:27:00.0 failed with error -22
> [ 10.444519] qla2xxx [0000:27:00.1]-001b: : BAR 3 not enabled.
> [ 10.444522] qla2xxx [0000:27:00.1]-001d: : Found an ISP2532 irq 110 iobase
> 0xffffacbf189b9000.
> [ 10.645932] scsi host5: qla2xxx
> [ 10.682233] qla2xxx: probe of 0000:27:00.1 failed with error -22
>
> Thanks
> Laurence
>
I started bisecting this, cannot believe others have not bumped into this on
4.10.
This is a generic QLE2562 and firmware is loaded by the driver so wondering why
I am seeing this and other are not.
There is nothing special with the PCIE bus on this DL380G8.
Anyway during the bisect I got to a point where in the 4.10 commits I still saw
the "BAR 3" message
but the probe worked.
[ 7.208237] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver:
8.07.00.38-k.
[ 7.208492] qla2xxx [0000:27:00.0]-001b: : BAR 3 not enabled.
see this above but probe did not fail
[ 7.208494] qla2xxx [0000:27:00.0]-001d: : Found an ISP2532 irq 97 iobase
0xffffc02f98989000.
[ 7.414738] scsi host4: qla2xxx
[ 7.419267] qla2xxx [0000:27:00.0]-00fb:4: QLogic QLE2562 - PCI-Express Dual
Channel 8Gb Fibre Channel HBA.
[ 7.419278] qla2xxx [0000:27:00.0]-00fc:4: ISP2532: PCIe (5.0GT/s x8) @
0000:27:00.0 hdma+ host#=4 fw=8.03.00 (90d5).
[ 7.419698] qla2xxx [0000:27:00.1]-001b: : BAR 3 not enabled.
[ 7.419701] qla2xxx [0000:27:00.1]-001d: : Found an ISP2532 irq 100 iobase
0xffffc02f989b1000.
[ 7.625691] scsi host6: qla2xxx
[ 7.629218] qla2xxx [0000:27:00.1]-00fb:6: QLogic QLE2562 - PCI-Express Dual
Channel 8Gb Fibre Channel HBA.
[ 7.629222] qla2xxx [0000:27:00.1]-00fc:6: ISP2532: PCIe (5.0GT/s x8) @
0000:27:00.1 hdma+ host#=6
I marked that still as bad and am continuing, I have 9 builds to go.
Thanks
Laurence
