Added support to set qd of drives in slave_configure.This only works for
HBA1000 attached drives.
Signed-off-by: Raghava Aditya Renukunta <raghavaaditya.renuku...@microsemi.com>
Signed-off-by: Dave Carroll <david.carr...@microsemi.com>
---
Changes in V2:
None
drivers/scsi/aacraid/linit.c | 100 ++++++++++++++++++++++++++++---------------
1 file changed, 66 insertions(+), 34 deletions(-)
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index e2d063d..698d522 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -401,20 +401,33 @@ static int aac_biosparm(struct scsi_device *sdev, struct
block_device *bdev,
static int aac_slave_configure(struct scsi_device *sdev)
{
struct aac_dev *aac = (struct aac_dev *)sdev->host->hostdata;
- if (aac->jbod && (sdev->type == TYPE_DISK))
- sdev->removable = 1;
- if ((sdev->type == TYPE_DISK) &&
+ int chn, tid, is_native_device = 0;
+
+ chn = aac_logical_to_phys(sdev_channel(sdev));
+ tid = sdev_id(sdev);
+ if (chn < AAC_MAX_BUSES && tid < AAC_MAX_TARGETS &&
+ aac->hba_map[chn][tid].devtype == AAC_DEVTYPE_NATIVE_RAW)
+ is_native_device = 1;
+
+
+ if (!is_native_device) {
+ if (aac->jbod && (sdev->type == TYPE_DISK))
+ sdev->removable = 1;
+ if ((sdev->type == TYPE_DISK) &&
(sdev_channel(sdev) != CONTAINER_CHANNEL) &&
(!aac->jbod || sdev->inq_periph_qual) &&
(!aac->raid_scsi_mode || (sdev_channel(sdev) != 2))) {
- if (expose_physicals == 0)
- return -ENXIO;
- if (expose_physicals < 0)
- sdev->no_uld_attach = 1;
+ if (expose_physicals == 0)
+ return -ENXIO;
+ if (expose_physicals < 0)
+ sdev->no_uld_attach = 1;
+ }
}
- if (sdev->tagged_supported && (sdev->type == TYPE_DISK) &&
+
+ if (is_native_device ||
+ (sdev->tagged_supported && (sdev->type == TYPE_DISK) &&
(!aac->raid_scsi_mode || (sdev_channel(sdev) != 2)) &&
- !sdev->no_uld_attach) {
+ !sdev->no_uld_attach)) {
struct scsi_device * dev;
struct Scsi_Host *host = sdev->host;
unsigned num_lsu = 0;
@@ -428,34 +441,41 @@ static int aac_slave_configure(struct scsi_device *sdev)
*/
if (sdev->request_queue->rq_timeout < (45 * HZ))
blk_queue_rq_timeout(sdev->request_queue, 45*HZ);
- for (cid = 0; cid < aac->maximum_num_containers; ++cid)
- if (aac->fsa_dev[cid].valid)
- ++num_lsu;
- __shost_for_each_device(dev, host) {
- if (dev->tagged_supported && (dev->type == TYPE_DISK) &&
+ if (!is_native_device) {
+ for (cid = 0; cid < aac->maximum_num_containers; ++cid)
+ if (aac->fsa_dev[cid].valid)
+ ++num_lsu;
+ __shost_for_each_device(dev, host) {
+ if (dev->tagged_supported &&
+ (dev->type == TYPE_DISK) &&
(!aac->raid_scsi_mode ||
- (sdev_channel(sdev) != 2)) &&
+ (sdev_channel(sdev) != 2)) &&
!dev->no_uld_attach) {
- if ((sdev_channel(dev) != CONTAINER_CHANNEL)
- || !aac->fsa_dev[sdev_id(dev)].valid)
- ++num_lsu;
- } else
- ++num_one;
+ if ((sdev_channel(dev)
+ != CONTAINER_CHANNEL)
+ || !aac->fsa_dev[sdev_id(dev)].valid) {
+ ++num_lsu;
+ }
+ } else {
+ ++num_one;
+ }
+ }
+ if (num_lsu == 0)
+ ++num_lsu;
+ depth = (host->can_queue - num_one) / num_lsu;
+ if (depth > 256)
+ depth = 256;
+ else if (depth < 2)
+ depth = 2;
+ scsi_change_queue_depth(sdev, depth);
+ } else {
+ scsi_change_queue_depth(sdev,
+ aac->hba_map[chn][tid].qd_limit);
}
- if (num_lsu == 0)
- ++num_lsu;
- depth = (host->can_queue - num_one) / num_lsu;
- if (depth > 256)
- depth = 256;
- else if (depth < 2)
- depth = 2;
- scsi_change_queue_depth(sdev, depth);
- } else {
- scsi_change_queue_depth(sdev, 1);
-
- sdev->tagged_supported = 1;
}
+ sdev->tagged_supported = 1;
+
return 0;
}
@@ -470,6 +490,15 @@ static int aac_slave_configure(struct scsi_device *sdev)
static int aac_change_queue_depth(struct scsi_device *sdev, int depth)
{
+ struct aac_dev *aac = (struct aac_dev *)(sdev->host->hostdata);
+ int chn, tid, is_native_device = 0;
+
+ chn = aac_logical_to_phys(sdev_channel(sdev));
+ tid = sdev_id(sdev);
+ if (chn < AAC_MAX_BUSES && tid < AAC_MAX_TARGETS &&
+ aac->hba_map[chn][tid].devtype == AAC_DEVTYPE_NATIVE_RAW)
+ is_native_device = 1;
+
if (sdev->tagged_supported && (sdev->type == TYPE_DISK) &&
(sdev_channel(sdev) == CONTAINER_CHANNEL)) {
struct scsi_device * dev;
@@ -491,9 +520,12 @@ static int aac_change_queue_depth(struct scsi_device
*sdev, int depth)
else if (depth < 2)
depth = 2;
return scsi_change_queue_depth(sdev, depth);
+ } else if (is_native_device) {
+ scsi_change_queue_depth(sdev, aac->hba_map[chn][tid].qd_limit);
+ } else {
+ scsi_change_queue_depth(sdev, 1);
}
-
- return scsi_change_queue_depth(sdev, 1);
+ return sdev->queue_depth;
}
static ssize_t aac_show_raid_level(struct device *dev, struct device_attribute
*attr, char *buf)
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
