When IRQ_AUTO is used, the interrupt for HP C2502 cards gets disabled.
Fix this by programming the card for a suitable free irq. The code for
the free irq search comes from ALSA.
Also allow IRQ 9 to work (it aliases to IRQ 2 on the card), as per
Ondrej Zary's patch.
Suggested-by: Ondrej Zary <li...@rainbow-software.org>
Signed-off-by: Finn Thain <fth...@telegraphics.com.au>
---
drivers/scsi/g_NCR5380.c | 70 +++++++++++++++++++++++++++++++++++++++---------
1 file changed, 57 insertions(+), 13 deletions(-)
diff --git a/drivers/scsi/g_NCR5380.c b/drivers/scsi/g_NCR5380.c
index 6d245a7..58a0b82 100644
--- a/drivers/scsi/g_NCR5380.c
+++ b/drivers/scsi/g_NCR5380.c
@@ -131,14 +131,33 @@ static void magic_configure(int idx, u8 irq, u8 magic[])
outb(magic[3], 0x379);
outb(magic[4], 0x379);
- /* allowed IRQs for HP C2502 */
- if (irq != 2 && irq != 3 && irq != 4 && irq != 5 && irq != 7)
- irq = 0;
+ if (irq == 9)
+ irq = 2;
+
if (idx >= 0 && idx <= 7)
cfg = 0x80 | idx | (irq << 4);
outb(cfg, 0x379);
}
+static irqreturn_t legacy_empty_irq_handler(int irq, void *dev_id)
+{
+ return IRQ_HANDLED;
+}
+
+static int legacy_find_free_irq(int *irq_table)
+{
+ while (*irq_table != -1) {
+ if (!request_irq(*irq_table, legacy_empty_irq_handler,
+ IRQF_PROBE_SHARED, "Test IRQ",
+ (void *)irq_table)) {
+ free_irq(*irq_table, (void *) irq_table);
+ return *irq_table;
+ }
+ irq_table++;
+ }
+ return -1;
+}
+
static unsigned int ncr_53c400a_ports[] = {
0x280, 0x290, 0x300, 0x310, 0x330, 0x340, 0x348, 0x350, 0
};
@@ -151,6 +170,9 @@ static u8 ncr_53c400a_magic[] = { /* 53C400A & DTC436 */
static u8 hp_c2502_magic[] = { /* HP C2502 */
0x0f, 0x22, 0xf0, 0x20, 0x80
};
+static int hp_c2502_irqs[] = {
+ 9, 5, 7, 3, 4, -1
+};
static int generic_NCR5380_init_one(struct scsi_host_template *tpnt,
struct device *pdev, int base, int irq, int board)
@@ -319,19 +341,41 @@ static int generic_NCR5380_init_one(struct
scsi_host_template *tpnt,
NCR5380_maybe_reset_bus(instance);
- if (irq != IRQ_AUTO)
- instance->irq = irq;
- else
- instance->irq = g_NCR5380_probe_irq(instance);
-
/* Compatibility with documented NCR5380 kernel parameters */
- if (instance->irq == 255)
- instance->irq = NO_IRQ;
+ if (irq == 255 || irq == 0)
+ irq = NO_IRQ;
+
+ if (board == BOARD_HP_C2502) {
+ int *irq_table = hp_c2502_irqs;
+ int board_irq = -1;
+
+ switch (irq) {
+ case NO_IRQ:
+ board_irq = 0;
+ break;
+ case IRQ_AUTO:
+ board_irq = legacy_find_free_irq(irq_table);
+ break;
+ default:
+ while (*irq_table != -1)
+ if (*irq_table++ == irq)
+ board_irq = irq;
+ }
+
+ if (board_irq <= 0) {
+ board_irq = 0;
+ irq = NO_IRQ;
+ }
+
+ magic_configure(port_idx, board_irq, magic);
+ }
+
+ if (irq == IRQ_AUTO)
+ instance->irq = g_NCR5380_probe_irq(instance);
+ else
+ instance->irq = irq;
if (instance->irq != NO_IRQ) {
- /* set IRQ for HP C2502 */
- if (board == BOARD_HP_C2502)
- magic_configure(port_idx, instance->irq, magic);
if (request_irq(instance->irq, generic_NCR5380_intr,
0, "NCR5380", instance)) {
printk(KERN_WARNING "scsi%d : IRQ%d not free,
interrupts disabled\n", instance->host_no, instance->irq);
--
2.7.3
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
