Hello Himanshu and Nicholas,
Enhancements to the tcm_debug code.
Added the possibility of blocking only specific SCSI data movement commands but
allowing TUR'S to pass.
This has been helpful for debugging many driver/array interoperabilty issues.
Two Patches, The first is to the driver code, second is updating the
documentation.
Tested by: Laurence Oberman <lober...@redhat.com>
Signed-off-by: Laurence Oberman <lober...@redhat.com>
drivers/scsi/qla2xxx/tcm_qla2xxx.c | 7 +++++++
drivers/scsi/qla2xxx/tcm_qla2xxx.h | 1 +
2 files changed, 8 insertions(+)
diff --git a/drivers/scsi/qla2xxx/tcm_qla2xxx.c
b/drivers/scsi/qla2xxx/tcm_qla2xxx.c
index 6643f6f..d620a77 100644
--- a/drivers/scsi/qla2xxx/tcm_qla2xxx.c
+++ b/drivers/scsi/qla2xxx/tcm_qla2xxx.c
@@ -473,6 +473,10 @@ static int tcm_qla2xxx_handle_cmd(scsi_qla_host_t *vha,
struct qla_tgt_cmd *cmd,
/* return, and dont run target_submit_cmd,discarding command */
return 0;
}
+ if (unlikely(tpg->tpg_attrib.jam_host && tpg->tpg_attrib.jam_data &&
(cdb[0]==0x08 || cdb[0]==0x0A || cdb[0]==0x28 || cdb[0]==0x2A))) {
+ /* return, and dont run target_submit_cmd,discarding command
if not TUR*/
+ return 0;
+ }
#endif
cmd->vha->tgt_counters.qla_core_sbt_cmd++;
@@ -827,6 +831,7 @@ DEF_QLA_TPG_ATTRIB(prod_mode_write_protect);
DEF_QLA_TPG_ATTRIB(demo_mode_login_only);
#ifdef CONFIG_TCM_QLA2XXX_DEBUG
DEF_QLA_TPG_ATTRIB(jam_host);
+DEF_QLA_TPG_ATTRIB(jam_data);
#endif
static struct configfs_attribute *tcm_qla2xxx_tpg_attrib_attrs[] = {
@@ -837,6 +842,7 @@ static struct configfs_attribute
*tcm_qla2xxx_tpg_attrib_attrs[] = {
&tcm_qla2xxx_tpg_attrib_attr_demo_mode_login_only,
#ifdef CONFIG_TCM_QLA2XXX_DEBUG
&tcm_qla2xxx_tpg_attrib_attr_jam_host,
+ &tcm_qla2xxx_tpg_attrib_attr_jam_data,
#endif
NULL,
};
@@ -1011,6 +1017,7 @@ static struct se_portal_group *tcm_qla2xxx_make_tpg(
tpg->tpg_attrib.cache_dynamic_acls = 1;
tpg->tpg_attrib.demo_mode_login_only = 1;
tpg->tpg_attrib.jam_host = 0;
+ tpg->tpg_attrib.jam_data = 0;
ret = core_tpg_register(wwn, &tpg->se_tpg, SCSI_PROTOCOL_FCP);
if (ret < 0) {
diff --git a/drivers/scsi/qla2xxx/tcm_qla2xxx.h
b/drivers/scsi/qla2xxx/tcm_qla2xxx.h
index 37e026a..789bdeb 100644
--- a/drivers/scsi/qla2xxx/tcm_qla2xxx.h
+++ b/drivers/scsi/qla2xxx/tcm_qla2xxx.h
@@ -35,6 +35,7 @@ struct tcm_qla2xxx_tpg_attrib {
int demo_mode_login_only;
int fabric_prot_type;
int jam_host;
+ int jam_data;
};
struct tcm_qla2xxx_tpg {
--
2.5.5
Documentation/scsi/tcm_qla2xxx.txt | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/Documentation/scsi/tcm_qla2xxx.txt
b/Documentation/scsi/tcm_qla2xxx.txt
index c3a670a..4a8706c 100644
--- a/Documentation/scsi/tcm_qla2xxx.txt
+++ b/Documentation/scsi/tcm_qla2xxx.txt
@@ -20,3 +20,19 @@ echo 1 >
/sys/kernel/config/target/qla2xxx/21:00:00:24:ff:27:8f:ae/tpgt_1/attrib
Disable jamming on host 4
echo 0 >
/sys/kernel/config/target/qla2xxx/21:00:00:24:ff:27:8f:ae/tpgt_1/attrib/jam_host
+
+New feature added with a new attribute called jam_data.
+
+Setting a boolean of 1 for jam_data as well as setting the boolean of 1 for
jam_host will
+ allow the dropping of data-only SCSI commands but allow TUR commands to pass.
+
+This has proven very useful for testing Low Level driver response.
+
+Enable host 4 for only data commands to be jammed
+echo 1 >
/sys/kernel/config/target/qla2xxx/21:00:00:24:ff:27:8f:ae/tpgt_1/attrib/jam_host
+echo 1 >
/sys/kernel/config/target/qla2xxx/21:00:00:24:ff:27:8f:ae/tpgt_1/attrib/jam_data
+
+Disable jamming on host 4
+echo 0 >
/sys/kernel/config/target/qla2xxx/21:00:00:24:ff:27:8f:ae/tpgt_1/attrib/jam_host
+echo 0 >
/sys/kernel/config/target/qla2xxx/21:00:00:24:ff:27:8f:ae/tpgt_1/attrib/jam_data
+
--
2.5.5
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
