The driver was calling scsi_scan_host before enabling interrupts.
This has gone unnoticed except for customers running in intx mode.
Calling scsi_scan_host before interrupts are enabled causes
"irq XX: nobody cared" messages and the driver to hang.
This patch enables interrupts before the call to scsi_scan_host.
Reported-by: Piotr Karbowski <piotr.karbow...@gmail.com>
Reviewed-by: Scott Teel <scott.t...@microsemi.com>
Reviewed-by: Kevin Barnett <kevin.barn...@microsemi.com>
Signed-off-by: Don Brace <don.br...@microsemi.com>
---
drivers/scsi/hpsa.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 5be944c..5763f43 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -8541,11 +8541,6 @@ reinit_after_soft_reset:
if (rc)
goto clean6; /* sg, cmd, irq, shost, pci, lu, aer/h */
- /* hook into SCSI subsystem */
- rc = hpsa_scsi_add_host(h);
- if (rc)
- goto clean7; /* perf, sg, cmd, irq, shost, pci, lu, aer/h */
-
/* create the resubmit workqueue */
h->rescan_ctlr_wq = hpsa_create_controller_wq(h, "rescan");
if (!h->rescan_ctlr_wq) {
@@ -8642,6 +8637,11 @@ reinit_after_soft_reset:
dev_info(&h->pdev->dev,
"Can't track change to report lun data\n");
+ /* hook into SCSI subsystem */
+ rc = hpsa_scsi_add_host(h);
+ if (rc)
+ goto clean7; /* perf, sg, cmd, irq, shost, pci, lu, aer/h */
+
/* Monitor the controller for firmware lockups */
h->heartbeat_sample_interval = HEARTBEAT_SAMPLE_INTERVAL;
INIT_DELAYED_WORK(&h->monitor_ctlr_work, hpsa_monitor_ctlr_worker);
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
