>
> Based on "[PATH V2] scsi_debug: rework resp_report_luns" patch sent by
> Tomas Winkler on Thursday, 26 Feb 2015. His notes:
> 1. Remove duplicated boundary checks which simplify the fill-in
> loop
> 2. Use more of scsi generic API
> Replace fixed length response array a with heap allocation allowing up to
> 16383 LUNs per target.
>
> Signed-off-by: Douglas Gilbert <dgilb...@interlog.com>
You can add my signed off.
Tomas
> ---
> drivers/scsi/scsi_debug.c | 138 ++++++++++++++++++++++++++++++------------
> ----
> 1 file changed, 91 insertions(+), 47 deletions(-)
>
> diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c index
> cf44ab0..eac62b8 100644
> --- a/drivers/scsi/scsi_debug.c
> +++ b/drivers/scsi/scsi_debug.c
> @@ -3205,63 +3205,99 @@ static int resp_get_lba_status(struct scsi_cmnd
> *scp,
> return fill_from_dev_buffer(scp, arr,
> SDEBUG_GET_LBA_STATUS_LEN); }
>
> -#define SDEBUG_RLUN_ARR_SZ 256
> -
> -static int resp_report_luns(struct scsi_cmnd * scp,
> - struct sdebug_dev_info * devip)
> +/* Even though each pseudo target has a REPORT LUNS "well known logical
> unit"
> + * (W-LUN), the normal Linux scanning logic does not associate it with
> +a
> + * device (e.g. /dev/sg7). The following magic will make that association:
> + * "cd /sys/class/scsi_host/host<n> ; echo '- - 49409' > scan"
> + * where <n> is a host number. If there are multiple targets in a host
> +then
> + * the above will associate a W-LUN to each target. To only get a W-LUN
> + * for target 2, then use "echo '- 2 49409' > scan" . */ static int
> +resp_report_luns(struct scsi_cmnd *scp,
> + struct sdebug_dev_info *devip)
> {
> + unsigned char *cmd = scp->cmnd;
> unsigned int alloc_len;
> - int lun_cnt, i, upper, num, n, want_wlun, shortish;
> + unsigned char select_report;
> u64 lun;
> - unsigned char *cmd = scp->cmnd;
> - int select_report = (int)cmd[2];
> - struct scsi_lun *one_lun;
> - unsigned char arr[SDEBUG_RLUN_ARR_SZ];
> - unsigned char * max_addr;
> + struct scsi_lun *lun_p;
> + u8 *arr;
> + unsigned int lun_cnt; /* normal LUN count (max: 16383) */
> + unsigned int wlun_cnt; /* report luns W-LUN count */
> + unsigned int tlun_cnt; /* total LUN count */
> + unsigned int rlen; /* response length (in bytes) less header */
> + int i, res;
>
> clear_luns_changed_on_target(devip);
> - alloc_len = cmd[9] + (cmd[8] << 8) + (cmd[7] << 16) + (cmd[6] << 24);
> - shortish = (alloc_len < 4);
> - if (shortish || (select_report > 2)) {
> - mk_sense_invalid_fld(scp, SDEB_IN_CDB, shortish ? 6 : 2, -1);
> +
> + select_report = cmd[2];
> + alloc_len = get_unaligned_be32(cmd + 6);
> +
> + if (alloc_len < 4) {
> + pr_err("alloc len too small %d\n", alloc_len);
> + mk_sense_invalid_fld(scp, SDEB_IN_CDB, 6, -1);
> return check_condition_result;
> }
> - /* can produce response with up to 16k luns (lun 0 to lun 16383) */
> - memset(arr, 0, SDEBUG_RLUN_ARR_SZ);
> +
> + if (select_report > 0x02) {
> + pr_err("select report invalid %d\n", select_report);
> + mk_sense_invalid_fld(scp, SDEB_IN_CDB, 2, -1);
> + return check_condition_result;
> + }
> +
> lun_cnt = sdebug_max_luns;
> - if (1 == select_report)
> + wlun_cnt = 0;
> +
> + /* report only w_lun */
> + if (select_report == 0x01)
> lun_cnt = 0;
> - else if (sdebug_no_lun_0 && (lun_cnt > 0))
> +
> + if (sdebug_no_lun_0 && (lun_cnt > 0))
> --lun_cnt;
> - want_wlun = (select_report > 0) ? 1 : 0;
> - num = lun_cnt + want_wlun;
> - arr[2] = ((sizeof(struct scsi_lun) * num) >> 8) & 0xff;
> - arr[3] = (sizeof(struct scsi_lun) * num) & 0xff;
> - n = min((int)((SDEBUG_RLUN_ARR_SZ - 8) /
> - sizeof(struct scsi_lun)), num);
> - if (n < num) {
> - want_wlun = 0;
> - lun_cnt = n;
> - }
> - one_lun = (struct scsi_lun *) &arr[8];
> - max_addr = arr + SDEBUG_RLUN_ARR_SZ;
> - for (i = 0, lun = (sdebug_no_lun_0 ? 1 : 0);
> - ((i < lun_cnt) && ((unsigned char *)(one_lun + i) < max_addr));
> - i++, lun++) {
> - upper = (lun >> 8) & 0x3f;
> - if (upper)
> - one_lun[i].scsi_lun[0] =
> - (upper | (SAM2_LUN_ADDRESS_METHOD << 6));
> - one_lun[i].scsi_lun[1] = lun & 0xff;
> - }
> - if (want_wlun) {
> - one_lun[i].scsi_lun[0] = (SCSI_W_LUN_REPORT_LUNS >> 8) &
> 0xff;
> - one_lun[i].scsi_lun[1] = SCSI_W_LUN_REPORT_LUNS & 0xff;
> - i++;
> - }
> - alloc_len = (unsigned char *)(one_lun + i) - arr;
> - return fill_from_dev_buffer(scp, arr,
> - min((int)alloc_len,
> SDEBUG_RLUN_ARR_SZ));
> +
> + /* report w_lun */
> + if (select_report == 0x01 || select_report == 0x02)
> + wlun_cnt = 1;
> +
> + tlun_cnt = lun_cnt + wlun_cnt;
> + /* can produce response with up to 16k luns (lun 0 to lun 16383) */
> + arr = kzalloc((tlun_cnt * sizeof(lun_p->scsi_lun)) + 8, GFP_ATOMIC);
> + if (!arr) {
> + pr_warn("No space for report luns response\n");
> + mk_sense_buffer(scp, ILLEGAL_REQUEST, INSUFF_RES_ASC,
> + INSUFF_RES_ASCQ);
> + return check_condition_result;
> + }
> + pr_debug("select_report %d luns = %d wluns = %d no_lun0 %d\n",
> + select_report, lun_cnt, wlun_cnt, sdebug_no_lun_0);
> +
> + lun = 0LL;
> + /* luns start at offset 8 after the byte length */
> + lun_p = (struct scsi_lun *)&arr[8];
> +
> + /* skip lun 0 */
> + if (sdebug_no_lun_0)
> + lun++;
> + /*
> + * Address method (we use Peripherial = 00b)
> + * 10b - Logical unit
> + * 00b - Peripherial device - Use this one
> + * 01b - Logical device
> + * 11b - reserved
> + */
> + for (i = 0; i < lun_cnt; i++)
> + int_to_scsilun(lun++, lun_p++);
> +
> + /* report SCSI_W_LUN_REPORT_LUN */
> + if (wlun_cnt)
> + int_to_scsilun(SCSI_W_LUN_REPORT_LUNS, lun_p++);
> +
> + rlen = tlun_cnt * sizeof(struct scsi_lun);
> +
> + put_unaligned_be32(rlen, &arr[0]);
> +
> + res = fill_from_dev_buffer(scp, arr, rlen + 8);
> + kfree(arr);
> + return res;
> }
>
> static int resp_xdwriteread(struct scsi_cmnd *scp, unsigned long long lba,
> @@ -4299,6 +4335,10 @@ static ssize_t max_luns_store(struct device_driver
> *ddp, const char *buf,
> bool changed;
>
> if ((count > 0) && (1 == sscanf(buf, "%d", &n)) && (n >= 0)) {
> + if (n > 16383) {
> + pr_warn("max_luns can be no more than 16383\n");
> + return -EINVAL;
> + }
> changed = (sdebug_max_luns != n);
> sdebug_max_luns = n;
> sdebug_max_tgts_luns();
> @@ -4643,6 +4683,10 @@ static int __init scsi_debug_init(void)
> pr_err("invalid physblk_exp %u\n", sdebug_physblk_exp);
> return -EINVAL;
> }
> + if (sdebug_max_luns > 16383) {
> + pr_warn("max_luns can be no more than 16383, use
> default\n");
> + sdebug_max_luns = DEF_MAX_LUNS;
> + }
>
> if (sdebug_lowest_aligned > 0x3fff) {
> pr_err("lowest_aligned too big: %u\n",
> sdebug_lowest_aligned);
> --
> 2.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
