Hi Sreekanth, thank you for replying so quickly. Here are the logs you requested (kernel 4.5.0):
> [ 2.083177] mpt3sas version 09.102.00.00 loaded > [ 2.083757] mpt2sas_cm0: mpt3sas_base_attach > [ 2.083956] mpt2sas_cm0: mpt3sas_base_map_resources > [ 2.084708] mpt2sas_cm0: 32 BIT PCI BUS DMA ADDRESSING SUPPORTED, total > mem (3074748 kB) > [ 2.084964] mpt2sas_cm0: _base_get_ioc_facts > [ 2.085154] mpt2sas_cm0: _base_wait_for_iocstate > [ 2.140893] offset:data > [ 2.141082] [0x00]:03100200 > [ 2.141257] [0x04]:00002300 > [ 2.141432] [0x08]:00000000 > [ 2.141606] [0x0c]:00000000 > [ 2.141780] [0x10]:00000000 > [ 2.141955] [0x14]:00010480 > [ 2.142129] [0x18]:22130d68 > [ 2.142303] [0x1c]:0001285c > [ 2.142477] [0x20]:14000400 > [ 2.142651] [0x24]:00000020 > [ 2.142825] [0x28]:0100000f > [ 2.143000] [0x2c]:000c000b > [ 2.143174] [0x30]:003c0003 > [ 2.143349] [0x34]:0020ffe0 > [ 2.143544] [0x38]:00800122 > [ 2.143719] [0x3c]:00000009 > [ 2.143895] mpt2sas_cm0: hba queue depth(3432), max chains per io(128) > [ 2.144106] mpt2sas_cm0: request frame size(128), reply frame size(128) > [ 2.144397] mpt2sas_cm0: msix is supported, vector_count(1) > [ 2.144600] mpt2sas_cm0: MSI-X vectors supported: 1, no of cores: 4, > max_msix_vectors: -1 > [ 2.145161] mpt2sas0-msix0: PCI-MSI-X enabled: IRQ 58 > [ 2.145361] mpt2sas_cm0: iomem(0x00000000fd4fc000), > mapped(0xffffc900000d0000), size(16384) > [ 2.145591] mpt2sas_cm0: ioport(0x0000000000004000), size(256) > [ 2.146206] mpt2sas_cm0: _base_get_ioc_facts > [ 2.146397] mpt2sas_cm0: _base_wait_for_iocstate > [ 2.202087] offset:data > [ 2.202281] [0x00]:03100200 > [ 2.202456] [0x04]:00002300 > [ 2.202631] [0x08]:00000000 > [ 2.202805] [0x0c]:00000000 > [ 2.202980] [0x10]:00000000 > [ 2.203154] [0x14]:00010480 > [ 2.203328] [0x18]:22130d68 > [ 2.203521] [0x1c]:0001285c > [ 2.203695] [0x20]:14000400 > [ 2.203870] [0x24]:00000020 > [ 2.204044] [0x28]:0100000f > [ 2.204219] [0x2c]:000c000b > [ 2.204394] [0x30]:003c0003 > [ 2.204571] [0x34]:0020ffe0 > [ 2.204746] [0x38]:00800122 > [ 2.204926] [0x3c]:00000009 > [ 2.205102] mpt2sas_cm0: hba queue depth(3432), max chains per io(128) > [ 2.205314] mpt2sas_cm0: request frame size(128), reply frame size(128) > [ 2.205528] mpt2sas_cm0: _base_make_ioc_ready > [ 2.205719] mpt2sas_cm0: _base_get_port_facts > [ 2.234205] offset:data > [ 2.234397] [0x00]:05070000 > [ 2.234573] [0x04]:00000000 > [ 2.234748] [0x08]:00000000 > [ 2.234928] [0x0c]:00000000 > [ 2.235103] [0x10]:00000000 > [ 2.235278] [0x14]:00003000 > [ 2.235453] [0x18]:00000078 > [ 2.235629] mpt2sas_cm0: _base_allocate_memory_pools > [ 2.235826] mpt2sas_cm0: scatter gather: sge_in_main_msg(3), > sge_per_chain(15), sge_per_io(128), chains_per_io(9) > [ 2.236227] mpt2sas_cm0: reply post free pool (0xffff8800bb380000): > depth(6944),element_size(8), pool_size(54 kB) > [ 2.236611] mpt2sas_cm0: reply_post_free_dma = (0xbb380000) > [ 2.236813] mpt2sas_cm0: scsi host: can_queue depth (3307) > [ 2.237086] mpt2sas_cm0: request pool(0xffff8800ba880000): depth(3432), > frame_size(128), pool_size(429 kB) > [ 2.238580] mpt2sas_cm0: request pool: dma(0xba880000) > [ 2.238781] mpt2sas_cm0: scsiio(0xffff8800ba880000): depth(3307) > [ 2.243644] mpt2sas_cm0: chain pool depth(29763), frame_size(128), > pool_size(3720 kB) > [ 2.243887] mpt2sas_cm0: hi_priority(0xffff8800ba8e7600): depth(60), start > smid(3308) > [ 2.244113] mpt2sas_cm0: internal(0xffff8800ba8e9400): depth(65), start > smid(3368) > [ 2.244390] mpt2sas_cm0: sense pool(0xffff8800ba480000): depth(3307), > element_size(96), pool_size(310 kB) > [ 2.244774] mpt2sas_cm0: sense_dma(0xba480000) > [ 2.245038] mpt2sas_cm0: reply pool(0xffff8800ba500000): depth(3496), > frame_size(128), pool_size(437 kB) > [ 2.245413] mpt2sas_cm0: reply_dma(0xba500000) > [ 2.245608] mpt2sas_cm0: reply_free pool(0xffff8800ba430000): depth(3496), > element_size(4), pool_size(13 kB) > [ 2.245985] mpt2sas_cm0: reply_free_dma (0xba430000) > [ 2.246181] mpt2sas_cm0: config page(0xffff8800ba429000): size(512) > [ 2.246389] mpt2sas_cm0: config_page_dma(0xba429000) > [ 2.246584] mpt2sas_cm0: Allocated physical memory: size(4964 kB) > [ 2.246791] mpt2sas_cm0: Current Controller Queue Depth(3307),Max > Controller Queue Depth(3432) > [ 2.247155] mpt2sas_cm0: Scatter Gather Elements per IO(128) > [ 2.247361] mpt2sas_cm0: _base_make_ioc_operational > [ 2.247962] mpt2sas_cm0: _base_send_ioc_init > [ 2.248154] offset:data > [ 2.248325] [0x00]:02000004 > [ 2.248499] [0x04]:00000000 > [ 2.248673] [0x08]:00000000 > [ 2.248848] [0x0c]:23000200 > [ 2.249023] [0x10]:00000000 > [ 2.249197] [0x14]:00000000 > [ 2.249372] [0x18]:00200000 > [ 2.249546] [0x1c]:0da81b20 > [ 2.249720] [0x20]:00000000 > [ 2.249894] [0x24]:00000000 > [ 2.250068] [0x28]:ba880000 > [ 2.250242] [0x2c]:00000000 > [ 2.250416] [0x30]:bb380000 > [ 2.250589] [0x34]:00000000 > [ 2.250768] [0x38]:ba430000 > [ 2.250941] [0x3c]:00000000 > [ 2.251115] [0x40]:983eb686 > [ 2.251288] [0x44]:00000153 > [ 2.296610] offset:data > [ 2.296795] [0x00]:02050004 > [ 2.296969] [0x04]:00000000 > [ 2.297143] [0x08]:00000000 > [ 2.297318] [0x0c]:00000000 > [ 2.297493] [0x10]:00000000 > [ 2.297668] mpt2sas_cm0: _base_event_notification > [ 5.093707] floppy0: no floppy controllers found > [ 32.293619] mpt2sas_cm0: _base_event_notification: timeout > [ 32.293909] mf: > > [ 32.294132] 07000000 > [ 32.294397] 00000000 > [ 32.294445] 00000000 > [ 32.294719] 00000000 > [ 32.294767] 00000000 > [ 32.295031] 0f2f7fff > [ 32.295078] ffffff7c > [ 32.295342] ffffffff > [ 32.295389] > > [ 32.295823] ffffffff > [ 32.295871] 00000000 > [ 32.296134] 00000000 > > [ 32.296615] mpt2sas_cm0: mpt3sas_base_free_resources > [ 32.296880] mpt2sas_cm0: _base_make_ioc_ready > [ 32.297135] mpt2sas_cm0: sending message unit reset !! > [ 32.298941] mpt2sas_cm0: message unit reset: SUCCESS > [ 32.299212] mpt2sas_cm0: mpt3sas_base_unmap_resources > [ 32.300381] mpt2sas_cm0: _base_release_memory_pools > [ 32.300654] mpt2sas_cm0: request_pool(0xffff8800ba880000): free > [ 32.300934] mpt2sas_cm0: sense_pool(0xffff8800ba480000): free > [ 32.301211] mpt2sas_cm0: reply_pool(0xffff8800ba500000): free > [ 32.301485] mpt2sas_cm0: reply_free_pool(0xffff8800ba430000): free > [ 32.301774] mpt2sas_cm0: reply_post_free_pool(0xffff8800bb380000): free > [ 32.302061] mpt2sas_cm0: config_page(0xffff8800ba429000): free > [ 32.371097] mpt2sas_cm0: failure at > drivers/scsi/mpt3sas/mpt3sas_scsih.c:8592/_scsih_probe()! > [ 32.371958] mpt2sas_cm1: mpt3sas_base_attach > [ 32.372154] mpt2sas_cm1: mpt3sas_base_map_resources > [ 32.372950] mpt2sas_cm1: 32 BIT PCI BUS DMA ADDRESSING SUPPORTED, total > mem (3074748 kB) > [ 32.373201] mpt2sas_cm1: _base_get_ioc_facts > [ 32.375261] mpt2sas_cm1: _base_wait_for_iocstate > [ 32.432012] offset:data > [ 32.432262] [0x00]:03100200 > [ 32.432499] [0x04]:00002300 > [ 32.432735] [0x08]:00000000 > [ 32.432971] [0x0c]:00000000 > [ 32.433206] [0x10]:00000000 > [ 32.433443] [0x14]:00010480 > [ 32.433701] [0x18]:22130d68 > [ 32.433937] [0x1c]:0001285c > [ 32.435434] [0x20]:14000400 > [ 32.435674] [0x24]:00000020 > [ 32.435909] [0x28]:0100000f > [ 32.436144] [0x2c]:000c000b > [ 32.436379] [0x30]:003c0003 > [ 32.436615] [0x34]:0020ffe0 > [ 32.436850] [0x38]:00800122 > [ 32.437085] [0x3c]:00000009 > [ 32.437322] mpt2sas_cm1: hba queue depth(3432), max chains per io(128) > [ 32.437607] mpt2sas_cm1: request frame size(128), reply frame size(128) > [ 32.438014] mpt2sas_cm1: msix is supported, vector_count(1) > [ 32.438288] mpt2sas_cm1: MSI-X vectors supported: 1, no of cores: 4, > max_msix_vectors: 8 > [ 32.439101] mpt2sas1-msix0: PCI-MSI-X enabled: IRQ 58 > [ 32.439373] mpt2sas_cm1: iomem(0x00000000fd1fc000), > mapped(0xffffc900000d8000), size(16384) > [ 32.439682] mpt2sas_cm1: ioport(0x0000000000007000), size(256) > [ 32.440504] mpt2sas_cm1: _base_get_ioc_facts > [ 32.440765] mpt2sas_cm1: _base_wait_for_iocstate > [ 32.499305] offset:data > [ 32.499557] [0x00]:03100200 > [ 32.499794] [0x04]:00002300 > [ 32.500031] [0x08]:00000000 > [ 32.500267] [0x0c]:00000000 > [ 32.500504] [0x10]:00000000 > [ 32.500740] [0x14]:00010480 > [ 32.500974] [0x18]:22130d68 > [ 32.501209] [0x1c]:0001285c > [ 32.501444] [0x20]:14000400 > [ 32.501687] [0x24]:00000020 > [ 32.501922] [0x28]:0100000f > [ 32.502157] [0x2c]:000c000b > [ 32.502391] [0x30]:003c0003 > [ 32.502626] [0x34]:0020ffe0 > [ 32.502862] [0x38]:00800122 > [ 32.503098] [0x3c]:00000009 > [ 32.503336] mpt2sas_cm1: hba queue depth(3432), max chains per io(128) > [ 32.503644] mpt2sas_cm1: request frame size(128), reply frame size(128) > [ 32.503933] mpt2sas_cm1: _base_make_ioc_ready > [ 32.504191] mpt2sas_cm1: _base_get_port_facts > [ 32.534282] offset:data > [ 32.534537] [0x00]:05070000 > [ 32.534782] [0x04]:00000000 > [ 32.535058] [0x08]:00000000 > [ 32.536473] [0x0c]:00000000 > [ 32.536710] [0x10]:00000000 > [ 32.536946] [0x14]:00003000 > [ 32.537183] [0x18]:00000078 > [ 32.537420] mpt2sas_cm1: _base_allocate_memory_pools > [ 32.537686] mpt2sas_cm1: scatter gather: sge_in_main_msg(3), > sge_per_chain(15), sge_per_io(128), chains_per_io(9) > [ 32.538232] mpt2sas_cm1: reply post free pool (0xffff8800bb3d0000): > depth(6944),element_size(8), pool_size(54 kB) > [ 32.538758] mpt2sas_cm1: reply_post_free_dma = (0xbb3d0000) > [ 32.539030] mpt2sas_cm1: scsi host: can_queue depth (3307) > [ 32.539378] mpt2sas_cm1: request pool(0xffff8800ba480000): depth(3432), > frame_size(128), pool_size(429 kB) > [ 32.539882] mpt2sas_cm1: request pool: dma(0xba480000) > [ 32.540149] mpt2sas_cm1: scsiio(0xffff8800ba480000): depth(3307) > [ 32.545893] mpt2sas_cm1: chain pool depth(29763), frame_size(128), > pool_size(3720 kB) > [ 32.546137] mpt2sas_cm1: hi_priority(0xffff8800ba4e7600): depth(60), start > smid(3308) > [ 32.546365] mpt2sas_cm1: internal(0xffff8800ba4e9400): depth(65), start > smid(3368) > [ 32.546651] mpt2sas_cm1: sense pool(0xffff8800ba880000): depth(3307), > element_size(96), pool_size(310 kB) > [ 32.547030] mpt2sas_cm1: sense_dma(0xba880000) > [ 32.547537] mpt2sas_cm1: reply pool(0xffff880000100000): depth(3496), > frame_size(128), pool_size(437 kB) > [ 32.547921] mpt2sas_cm1: reply_dma(0x100000) > [ 32.548117] mpt2sas_cm1: reply_free pool(0xffff8800ba964000): depth(3496), > element_size(4), pool_size(13 kB) > [ 32.548500] mpt2sas_cm1: reply_free_dma (0xba964000) > [ 32.548698] mpt2sas_cm1: config page(0xffff8800ba960000): size(512) > [ 32.548908] mpt2sas_cm1: config_page_dma(0xba960000) > [ 32.549105] mpt2sas_cm1: Allocated physical memory: size(4964 kB) > [ 32.549314] mpt2sas_cm1: Current Controller Queue Depth(3307),Max > Controller Queue Depth(3432) > [ 32.550950] mpt2sas_cm1: Scatter Gather Elements per IO(128) > [ 32.551160] mpt2sas_cm1: _base_make_ioc_operational > [ 32.551855] mpt2sas_cm1: _base_send_ioc_init > [ 32.552051] offset:data > [ 32.552224] [0x00]:02000004 > [ 32.552400] [0x04]:00000000 > [ 32.552576] [0x08]:00000000 > [ 32.552761] [0x0c]:23000200 > [ 32.552937] [0x10]:00000000 > [ 32.553114] [0x14]:00000000 > [ 32.553291] [0x18]:00200000 > [ 32.553468] [0x1c]:0da81b20 > [ 32.553685] [0x20]:00000000 > [ 32.553862] [0x24]:00000000 > [ 32.554038] [0x28]:ba480000 > [ 32.554215] [0x2c]:00000000 > [ 32.554393] [0x30]:bb3d0000 > [ 32.554569] [0x34]:00000000 > [ 32.554752] [0x38]:ba964000 > [ 32.554929] [0x3c]:00000000 > [ 32.555106] [0x40]:983f2ce6 > [ 32.555283] [0x44]:00000153 > [ 32.601516] offset:data > [ 32.601768] [0x00]:02050004 > [ 32.602003] [0x04]:00000000 > [ 32.602239] [0x08]:00000000 > [ 32.602474] [0x0c]:00000000 > [ 32.602709] [0x10]:00000000 > [ 32.602945] mpt2sas_cm1: _base_event_notification > [ 62.593604] mpt2sas_cm1: _base_event_notification: timeout > [ 62.593906] mf: > > [ 62.594127] 07000000 > [ 62.594390] 00000000 > [ 62.594438] 00000000 > [ 62.594709] 00000000 > [ 62.594757] 00000000 > [ 62.595019] 0f2f7fff > [ 62.595067] ffffff7c > [ 62.595330] ffffffff > [ 62.595377] > > [ 62.595808] ffffffff > [ 62.595855] 00000000 > [ 62.596117] 00000000 > > [ 62.596601] mpt2sas_cm1: mpt3sas_base_free_resources > [ 62.596871] mpt2sas_cm1: _base_make_ioc_ready > [ 62.597125] mpt2sas_cm1: sending message unit reset !! > [ 62.599013] mpt2sas_cm1: message unit reset: SUCCESS > [ 62.599283] mpt2sas_cm1: mpt3sas_base_unmap_resources > [ 62.600443] mpt2sas_cm1: _base_release_memory_pools > [ 62.600721] mpt2sas_cm1: request_pool(0xffff8800ba480000): free > [ 62.601002] mpt2sas_cm1: sense_pool(0xffff8800ba880000): free > [ 62.601280] mpt2sas_cm1: reply_pool(0xffff880000100000): free > [ 62.601560] mpt2sas_cm1: reply_free_pool(0xffff8800ba964000): free > [ 62.601845] mpt2sas_cm1: reply_post_free_pool(0xffff8800bb3d0000): free > [ 62.602133] mpt2sas_cm1: config_page(0xffff8800ba960000): free > [ 62.673591] mpt2sas_cm1: failure at > drivers/scsi/mpt3sas/mpt3sas_scsih.c:8592/_scsih_probe()! These are for two controllers, I don't know whether the output from the second is helpful at all - I added it anyway. I managed to boot the same 4.5.0 kernel successfully after warm rebooting from 4.1.20. That gave me this dmesg output (for comparison): > [ 2.057685] mpt3sas version 09.102.00.00 loaded > [ 2.058371] mpt2sas_cm0: mpt3sas_base_attach > [ 2.058632] mpt2sas_cm0: mpt3sas_base_map_resources > [ 2.059583] mpt2sas_cm0: 32 BIT PCI BUS DMA ADDRESSING SUPPORTED, total > mem (3074748 kB) > [ 2.059911] mpt2sas_cm0: _base_get_ioc_facts > [ 2.060166] mpt2sas_cm0: _base_wait_for_iocstate > [ 2.116337] offset:data > [ 2.116576] [0x00]:03100200 > [ 2.116817] [0x04]:00002300 > [ 2.117051] [0x08]:00000000 > [ 2.117285] [0x0c]:00000000 > [ 2.117518] [0x10]:00000000 > [ 2.117752] [0x14]:00010480 > [ 2.117986] [0x18]:22130d68 > [ 2.118220] [0x1c]:0001285c > [ 2.119624] [0x20]:14000400 > [ 2.119858] [0x24]:00000020 > [ 2.120093] [0x28]:0100000f > [ 2.120351] [0x2c]:000c000b > [ 2.120586] [0x30]:003c0003 > [ 2.120820] [0x34]:0020ffe0 > [ 2.121055] [0x38]:00800122 > [ 2.121288] [0x3c]:00000009 > [ 2.121524] mpt2sas_cm0: hba queue depth(3432), max chains per io(128) > [ 2.121808] mpt2sas_cm0: request frame size(128), reply frame size(128) > [ 2.122195] mpt2sas_cm0: msix is supported, vector_count(1) > [ 2.122468] mpt2sas_cm0: MSI-X vectors supported: 1, no of cores: 4, > max_msix_vectors: -1 > [ 2.123239] mpt2sas0-msix0: PCI-MSI-X enabled: IRQ 58 > [ 2.123507] mpt2sas_cm0: iomem(0x00000000fd4fc000), > mapped(0xffffc900000d0000), size(16384) > [ 2.123816] mpt2sas_cm0: ioport(0x0000000000004000), size(256) > [ 2.124623] mpt2sas_cm0: _base_get_ioc_facts > [ 2.124878] mpt2sas_cm0: _base_wait_for_iocstate > [ 2.180907] offset:data > [ 2.181145] [0x00]:03100200 > [ 2.181379] [0x04]:00002300 > [ 2.181613] [0x08]:00000000 > [ 2.181847] [0x0c]:00000000 > [ 2.182081] [0x10]:00000000 > [ 2.182315] [0x14]:00010480 > [ 2.182547] [0x18]:22130d68 > [ 2.182781] [0x1c]:0001285c > [ 2.183014] [0x20]:14000400 > [ 2.183248] [0x24]:00000020 > [ 2.183481] [0x28]:0100000f > [ 2.183720] [0x2c]:000c000b > [ 2.183954] [0x30]:003c0003 > [ 2.184190] [0x34]:0020ffe0 > [ 2.184424] [0x38]:00800122 > [ 2.184658] [0x3c]:00000009 > [ 2.184893] mpt2sas_cm0: hba queue depth(3432), max chains per io(128) > [ 2.185177] mpt2sas_cm0: request frame size(128), reply frame size(128) > [ 2.185462] mpt2sas_cm0: _base_make_ioc_ready > [ 2.185717] mpt2sas_cm0: _base_get_port_facts > [ 2.214057] offset:data > [ 2.214295] [0x00]:05070000 > [ 2.214529] [0x04]:00000000 > [ 2.214762] [0x08]:00000000 > [ 2.214997] [0x0c]:00000000 > [ 2.215230] [0x10]:00000000 > [ 2.215464] [0x14]:00003000 > [ 2.215697] [0x18]:00000078 > [ 2.215931] mpt2sas_cm0: _base_allocate_memory_pools > [ 2.216194] mpt2sas_cm0: scatter gather: sge_in_main_msg(3), > sge_per_chain(15), sge_per_io(128), chains_per_io(9) > [ 2.216734] mpt2sas_cm0: reply post free pool (0xffff8800bafc0000): > depth(6944),element_size(8), pool_size(54 kB) > [ 2.217244] mpt2sas_cm0: reply_post_free_dma = (0xbafc0000) > [ 2.217514] mpt2sas_cm0: scsi host: can_queue depth (3307) > [ 2.217866] mpt2sas_cm0: request pool(0xffff8800ba800000): depth(3432), > frame_size(128), pool_size(429 kB) > [ 2.218369] mpt2sas_cm0: request pool: dma(0xba800000) > [ 2.218637] mpt2sas_cm0: scsiio(0xffff8800ba800000): depth(3307) > [ 2.224773] mpt2sas_cm0: chain pool depth(29763), frame_size(128), > pool_size(3720 kB) > [ 2.225092] mpt2sas_cm0: hi_priority(0xffff8800ba867600): depth(60), start > smid(3308) > [ 2.225395] mpt2sas_cm0: internal(0xffff8800ba869400): depth(65), start > smid(3368) > [ 2.225958] mpt2sas_cm0: sense pool(0xffff8800ba480000): depth(3307), > element_size(96), pool_size(310 kB) > [ 2.226457] mpt2sas_cm0: sense_dma(0xba480000) > [ 2.227039] mpt2sas_cm0: reply pool(0xffff8800ba500000): depth(3496), > frame_size(128), pool_size(437 kB) > [ 2.227413] mpt2sas_cm0: reply_dma(0xba500000) > [ 2.227616] mpt2sas_cm0: reply_free pool(0xffff8800ba450000): depth(3496), > element_size(4), pool_size(13 kB) > [ 2.227992] mpt2sas_cm0: reply_free_dma (0xba450000) > [ 2.228192] mpt2sas_cm0: config page(0xffff8800ba43b000): size(512) > [ 2.228402] mpt2sas_cm0: config_page_dma(0xba43b000) > [ 2.228598] mpt2sas_cm0: Allocated physical memory: size(4964 kB) > [ 2.228806] mpt2sas_cm0: Current Controller Queue Depth(3307),Max > Controller Queue Depth(3432) > [ 2.229171] mpt2sas_cm0: Scatter Gather Elements per IO(128) > [ 2.229378] mpt2sas_cm0: _base_make_ioc_operational > [ 2.229959] mpt2sas_cm0: _base_send_ioc_init > [ 2.230151] offset:data > [ 2.230323] [0x00]:02000004 > [ 2.230499] [0x04]:00000000 > [ 2.230675] [0x08]:00000000 > [ 2.230851] [0x0c]:23000200 > [ 2.231026] [0x10]:00000000 > [ 2.231201] [0x14]:00000000 > [ 2.231376] [0x18]:00200000 > [ 2.231551] [0x1c]:0da81b20 > [ 2.231726] [0x20]:00000000 > [ 2.231900] [0x24]:00000000 > [ 2.232075] [0x28]:ba800000 > [ 2.232250] [0x2c]:00000000 > [ 2.232423] [0x30]:bafc0000 > [ 2.232597] [0x34]:00000000 > [ 2.232775] [0x38]:ba450000 > [ 2.232950] [0x3c]:00000000 > [ 2.233125] [0x40]:98596e4f > [ 2.233299] [0x44]:00000153 > [ 2.278752] offset:data > [ 2.278988] [0x00]:02050004 > [ 2.279220] [0x04]:00000000 > [ 2.279453] [0x08]:00000000 > [ 2.279685] [0x0c]:00000000 > [ 2.279918] [0x10]:00000000 > [ 2.280151] mpt2sas_cm0: _base_event_notification > [ 2.280537] mpt2sas_cm0: _base_event_notification: complete > [ 2.281694] mpt2sas_cm0: LSISAS2008: FWVersion(20.00.04.00), > ChipRevision(0x03), BiosVersion(07.39.00.00) > [ 2.282196] mpt2sas_cm0: Protocol=( > [ 2.282261] Initiator > [ 2.282522] ,Target > [ 2.282567] ), > [ 2.282824] Capabilities=( > [ 2.282877] TLR > [ 2.283132] ,EEDP > [ 2.283175] ,Snapshot Buffer > [ 2.283444] ,Diag Trace Buffer > [ 2.283502] ,Task Set Full > [ 2.283774] ,NCQ > [ 2.283816] ) > [ 2.284350] scsi host0: Fusion MPT SAS Host > [ 2.299028] mpt2sas_cm0: sending port enable !! > [ 2.299540] mpt2sas_cm0: Discovery: (start) > > [ 2.299972] mpt2sas_cm0: SAS Enclosure Device Status Change > [ 2.299984] mpt2sas_cm0: discovery event: (start) > > [ 2.300554] mpt2sas_cm0: SAS Topology Change List > [ 2.300759] mpt2sas_cm0: Discovery: (stop) > > [ 2.301146] mpt2sas_cm0: Discovery: (start) > > [ 2.301535] mpt2sas_cm0: Discovery: (stop) > > [ 2.301927] mpt2sas_cm0: Discovery: (start) > > [ 2.302316] mpt2sas_cm0: Discovery: (stop) > > [ 2.302707] mpt2sas_cm0: Discovery: (start) > > [ 2.304908] mpt2sas_cm0: Discovery: (stop) > > [ 2.305297] mpt2sas_cm0: Discovery: (start) > > [ 2.306776] mpt2sas_cm0: Discovery: (stop) > > [ 2.307166] mpt2sas_cm0: Discovery: (start) > > [ 2.307559] mpt2sas_cm0: Discovery: (stop) > > [ 2.307948] mpt2sas_cm0: Discovery: (start) > > [ 2.308336] mpt2sas_cm0: Discovery: (stop) > > [ 2.311738] mpt2sas_cm0: host_add: handle(0x0001), > sas_addr(0x500605b003683dd0), phys(8) > [ 2.312097] mpt2sas_cm0: enclosure status change: (enclosure add) > handle(0x0001), enclosure logical > id(0x500605b003683dd0) number slots(0) > [ 2.312551] mpt2sas_cm0: sas topology change: (responding) > [ 2.312768] handle(0x0000), enclosure_handle(0x0001) start_phy(00), > count(8) > [ 2.313003] phy(01), attached_handle(0x0009): target add: link > rate: new(0x0a), old(0x00) > [ 2.313250] phy(02), attached_handle(0x000a): target add: link > rate: new(0x09), old(0x00) > [ 2.313498] phy(03), attached_handle(0x000b): target add: link > rate: new(0x09), old(0x00) > [ 2.313745] phy(04), attached_handle(0x000c): target add: link > rate: new(0x09), old(0x00) > [ 2.313992] phy(05), attached_handle(0x000d): target add: link > rate: new(0x09), old(0x00) > [ 2.314248] phy(06), attached_handle(0x000e): target add: link > rate: new(0x09), old(0x00) > [ 2.314495] phy(07), attached_handle(0x000f): target add: link > rate: new(0x09), old(0x00) > [ 2.314747] mpt2sas_cm0: updating handles for sas_host(0x500605b003683dd0) > [ 2.316041] mpt2sas_cm0: _scsih_sas_device_init_add: handle(0x0009), > sas_addr(0x4433221101000000) > [ 2.316465] mpt2sas_cm0: _scsih_sas_device_init_add: enclosure logical > id(0x500605b003683dd0), slot( 2) > [ 2.317200] mpt2sas_cm0: _scsih_sas_device_init_add: handle(0x000a), > sas_addr(0x4433221102000000) > [ 2.317669] mpt2sas_cm0: _scsih_sas_device_init_add: enclosure logical > id(0x500605b003683dd0), slot( 1) > [ 2.318431] mpt2sas_cm0: _scsih_sas_device_init_add: handle(0x000b), > sas_addr(0x4433221103000000) > [ 2.318900] mpt2sas_cm0: _scsih_sas_device_init_add: enclosure logical > id(0x500605b003683dd0), slot( 0) > [ 2.319366] mpt2sas_cm0: _scsih_determine_boot_device: > current_boot_device(0x4433221103000000) > [ 2.320151] mpt2sas_cm0: _scsih_sas_device_init_add: handle(0x000c), > sas_addr(0x4433221104000000) > [ 2.321371] mpt2sas_cm0: _scsih_sas_device_init_add: enclosure logical > id(0x500605b003683dd0), slot( 7) > [ 2.322137] mpt2sas_cm0: _scsih_sas_device_init_add: handle(0x000d), > sas_addr(0x4433221105000000) > [ 2.322606] mpt2sas_cm0: _scsih_sas_device_init_add: enclosure logical > id(0x500605b003683dd0), slot( 6) > [ 2.323367] mpt2sas_cm0: _scsih_sas_device_init_add: handle(0x000e), > sas_addr(0x4433221106000000) > [ 2.323834] mpt2sas_cm0: _scsih_sas_device_init_add: enclosure logical > id(0x500605b003683dd0), slot( 5) > [ 2.324602] mpt2sas_cm0: _scsih_sas_device_init_add: handle(0x000f), > sas_addr(0x4433221107000000) > [ 2.325071] mpt2sas_cm0: _scsih_sas_device_init_add: enclosure logical > id(0x500605b003683dd0), slot( 4) > [ 2.325541] mpt2sas_cm0: discovery event: (stop) > > [ 2.326017] mpt2sas_cm0: discovery event: (start) > > [ 2.326492] mpt2sas_cm0: discovery event: (stop) > > [ 2.326975] mpt2sas_cm0: discovery event: (start) > > [ 2.327450] mpt2sas_cm0: discovery event: (stop) > > [ 2.327923] mpt2sas_cm0: discovery event: (start) > > [ 2.328396] mpt2sas_cm0: discovery event: (stop) > > [ 2.328868] mpt2sas_cm0: discovery event: (start) > > [ 2.329340] mpt2sas_cm0: discovery event: (stop) > > [ 2.329816] mpt2sas_cm0: discovery event: (start) > > [ 2.330316] mpt2sas_cm0: discovery event: (stop) > > [ 2.330797] mpt2sas_cm0: discovery event: (start) > > [ 2.331269] mpt2sas_cm0: discovery event: (stop) > > [ 2.331740] mpt2sas_cm0: port enable: complete from worker thread > [ 2.350236] mpt2sas_cm0: port enable: SUCCESS > [ 2.356432] scsi 0:0:0:0: Direct-Access ATA ST3750330NS SN06 > PQ: 0 ANSI: 6 > [ 2.356683] scsi 0:0:0:0: SATA: handle(0x000b), > sas_addr(0x4433221103000000), phy(3), device_name(0x5000c5000267c9f8) > [ 2.357080] scsi 0:0:0:0: SATA: enclosure_logical_id(0x500605b003683dd0), > slot(0) > [ 2.357405] scsi 0:0:0:0: atapi(n), ncq(y), asyn_notify(n), smart(y), > fua(y), sw_preserve(y) > [ 2.383043] scsi 0:0:1:0: Direct-Access ATA Hitachi HDS5C302 A800 > PQ: 0 ANSI: 6 > [ 2.383296] scsi 0:0:1:0: SATA: handle(0x0009), > sas_addr(0x4433221101000000), phy(1), device_name(0x5000cca369cdd311) > [ 2.383684] scsi 0:0:1:0: SATA: enclosure_logical_id(0x500605b003683dd0), > slot(2) > [ 2.384028] scsi 0:0:1:0: atapi(n), ncq(y), asyn_notify(n), smart(y), > fua(y), sw_preserve(y) > [ 2.405088] scsi 0:0:2:0: Direct-Access ATA ST3750330NS SN06 > PQ: 0 ANSI: 6 > [ 2.405346] scsi 0:0:2:0: SATA: handle(0x000a), > sas_addr(0x4433221102000000), phy(2), device_name(0x5000c5000ccfbd32) > [ 2.405735] scsi 0:0:2:0: SATA: enclosure_logical_id(0x500605b003683dd0), > slot(1) > [ 2.406082] scsi 0:0:2:0: atapi(n), ncq(y), asyn_notify(n), smart(y), > fua(y), sw_preserve(y) > [ 2.424125] scsi 0:0:3:0: Direct-Access ATA ST3750330NS SN06 > PQ: 0 ANSI: 6 > [ 2.424373] scsi 0:0:3:0: SATA: handle(0x000c), > sas_addr(0x4433221104000000), phy(4), device_name(0x5000c5000267abee) > [ 2.424763] scsi 0:0:3:0: SATA: enclosure_logical_id(0x500605b003683dd0), > slot(7) > [ 2.425108] scsi 0:0:3:0: atapi(n), ncq(y), asyn_notify(n), smart(y), > fua(y), sw_preserve(y) > [ 2.444834] scsi 0:0:4:0: Direct-Access ATA ST3750330NS SN06 > PQ: 0 ANSI: 6 > [ 2.445086] scsi 0:0:4:0: SATA: handle(0x000d), > sas_addr(0x4433221105000000), phy(5), device_name(0x5000c50009c0e5e6) > [ 2.445478] scsi 0:0:4:0: SATA: enclosure_logical_id(0x500605b003683dd0), > slot(6) > [ 2.445803] scsi 0:0:4:0: atapi(n), ncq(y), asyn_notify(n), smart(y), > fua(y), sw_preserve(y) > [ 2.464065] scsi 0:0:5:0: Direct-Access ATA ST3750330NS SN16 > PQ: 0 ANSI: 6 > [ 2.464312] scsi 0:0:5:0: SATA: handle(0x000e), > sas_addr(0x4433221106000000), phy(6), device_name(0x5000c5003cb9ac10) > [ 2.464699] scsi 0:0:5:0: SATA: enclosure_logical_id(0x500605b003683dd0), > slot(5) > [ 2.465048] scsi 0:0:5:0: atapi(n), ncq(y), asyn_notify(n), smart(y), > fua(y), sw_preserve(y) > [ 2.484016] scsi 0:0:6:0: Direct-Access ATA ST3750330NS SN06 > PQ: 0 ANSI: 6 > [ 2.484266] scsi 0:0:6:0: SATA: handle(0x000f), > sas_addr(0x4433221107000000), phy(7), device_name(0x5000c5000839b69e) > [ 2.484655] scsi 0:0:6:0: SATA: enclosure_logical_id(0x500605b003683dd0), > slot(4) > [ 2.485001] scsi 0:0:6:0: atapi(n), ncq(y), asyn_notify(n), smart(y), > fua(y), sw_preserve(y) > [ 2.500660] mpt2sas_cm1: mpt3sas_base_attach > [ 2.500861] mpt2sas_cm1: mpt3sas_base_map_resources > [ 2.501599] mpt2sas_cm1: 32 BIT PCI BUS DMA ADDRESSING SUPPORTED, total > mem (3074748 kB) > [ 2.501847] mpt2sas_cm1: _base_get_ioc_facts > [ 2.502036] mpt2sas_cm1: _base_wait_for_iocstate > [ 2.559080] offset:data > [ 2.559318] [0x00]:03100200 > [ 2.559552] [0x04]:00002300 > [ 2.559785] [0x08]:00000000 > [ 2.560020] [0x0c]:00000000 > [ 2.560277] [0x10]:00000000 > [ 2.560511] [0x14]:00010480 > [ 2.560745] [0x18]:22130d68 > [ 2.560978] [0x1c]:0001285c > [ 2.561210] [0x20]:14000400 > [ 2.561443] [0x24]:00000020 > [ 2.561675] [0x28]:0100000f > [ 2.561907] [0x2c]:000c000b > [ 2.562139] [0x30]:003c0003 > [ 2.562371] [0x34]:0020ffe0 > [ 2.562602] [0x38]:00800122 > [ 2.562839] [0x3c]:00000009 > [ 2.563073] mpt2sas_cm1: hba queue depth(3432), max chains per io(128) > [ 2.563355] mpt2sas_cm1: request frame size(128), reply frame size(128) > [ 2.563745] mpt2sas_cm1: msix is supported, vector_count(1) > [ 2.564016] mpt2sas_cm1: MSI-X vectors supported: 1, no of cores: 4, > max_msix_vectors: 8 > [ 2.564918] mpt2sas1-msix0: PCI-MSI-X enabled: IRQ 59 > [ 2.566189] mpt2sas_cm1: iomem(0x00000000fd1fc000), > mapped(0xffffc900000d8000), size(16384) > [ 2.566498] mpt2sas_cm1: ioport(0x0000000000007000), size(256) > [ 2.567328] mpt2sas_cm1: _base_get_ioc_facts > [ 2.567583] mpt2sas_cm1: _base_wait_for_iocstate > [ 2.625125] offset:data > [ 2.625364] [0x00]:03100200 > [ 2.625597] [0x04]:00002300 > [ 2.625830] [0x08]:00000000 > [ 2.626064] [0x0c]:00000000 > [ 2.626296] [0x10]:00000000 > [ 2.626529] [0x14]:00010480 > [ 2.626769] [0x18]:22130d68 > [ 2.627002] [0x1c]:0001285c > [ 2.627235] [0x20]:14000400 > [ 2.627467] [0x24]:00000020 > [ 2.627702] [0x28]:0100000f > [ 2.627936] [0x2c]:000c000b > [ 2.628170] [0x30]:003c0003 > [ 2.628403] [0x34]:0020ffe0 > [ 2.628638] [0x38]:00800122 > [ 2.628872] [0x3c]:00000009 > [ 2.629107] mpt2sas_cm1: hba queue depth(3432), max chains per io(128) > [ 2.629388] mpt2sas_cm1: request frame size(128), reply frame size(128) > [ 2.629671] mpt2sas_cm1: _base_make_ioc_ready > [ 2.629928] mpt2sas_cm1: _base_get_port_facts > [ 2.660127] offset:data > [ 2.660389] [0x00]:05070000 > [ 2.660623] [0x04]:00000000 > [ 2.660858] [0x08]:00000000 > [ 2.661093] [0x0c]:00000000 > [ 2.661326] [0x10]:00000000 > [ 2.661562] [0x14]:00003000 > [ 2.661796] [0x18]:00000078 > [ 2.664346] mpt2sas_cm1: _base_allocate_memory_pools > [ 2.664608] mpt2sas_cm1: scatter gather: sge_in_main_msg(3), > sge_per_chain(15), sge_per_io(128), chains_per_io(9) > [ 2.665142] mpt2sas_cm1: reply post free pool (0xffff8800b8b10000): > depth(6944),element_size(8), pool_size(54 kB) > [ 2.666671] mpt2sas_cm1: reply_post_free_dma = (0xb8b10000) > [ 2.666954] mpt2sas_cm1: scsi host: can_queue depth (3307) > [ 2.667311] mpt2sas_cm1: request pool(0xffff8800b8b80000): depth(3432), > frame_size(128), pool_size(429 kB) > [ 2.667813] mpt2sas_cm1: request pool: dma(0xb8b80000) > [ 2.668080] mpt2sas_cm1: scsiio(0xffff8800b8b80000): depth(3307) > [ 2.674131] mpt2sas_cm1: chain pool depth(29763), frame_size(128), > pool_size(3720 kB) > [ 2.674448] mpt2sas_cm1: hi_priority(0xffff8800b8be7600): depth(60), start > smid(3308) > [ 2.674750] mpt2sas_cm1: internal(0xffff8800b8be9400): depth(65), start > smid(3368) > [ 2.675105] mpt2sas_cm1: sense pool(0xffff8800b8100000): depth(3307), > element_size(96), pool_size(310 kB) > [ 2.675605] mpt2sas_cm1: sense_dma(0xb8100000) > [ 2.675944] mpt2sas_cm1: reply pool(0xffff8800b8180000): depth(3496), > frame_size(128), pool_size(437 kB) > [ 2.676443] mpt2sas_cm1: reply_dma(0xb8180000) > [ 2.676702] mpt2sas_cm1: reply_free pool(0xffff8800b80a0000): depth(3496), > element_size(4), pool_size(13 kB) > [ 2.677124] mpt2sas_cm1: reply_free_dma (0xb80a0000) > [ 2.677322] mpt2sas_cm1: config page(0xffff8800b807f000): size(512) > [ 2.677532] mpt2sas_cm1: config_page_dma(0xb807f000) > [ 2.677728] mpt2sas_cm1: Allocated physical memory: size(4964 kB) > [ 2.677936] mpt2sas_cm1: Current Controller Queue Depth(3307),Max > Controller Queue Depth(3432) > [ 2.678304] mpt2sas_cm1: Scatter Gather Elements per IO(128) > [ 2.678514] mpt2sas_cm1: _base_make_ioc_operational > [ 2.679081] mpt2sas_cm1: _base_send_ioc_init > [ 2.679275] offset:data > [ 2.679448] [0x00]:02000004 > [ 2.679625] [0x04]:00000000 > [ 2.679805] [0x08]:00000000 > [ 2.681200] [0x0c]:23000200 > [ 2.681377] [0x10]:00000000 > [ 2.681554] [0x14]:00000000 > [ 2.681729] [0x18]:00200000 > [ 2.681906] [0x1c]:0da81b20 > [ 2.682082] [0x20]:00000000 > [ 2.682259] [0x24]:00000000 > [ 2.682435] [0x28]:b8b80000 > [ 2.682611] [0x2c]:00000000 > [ 2.682787] [0x30]:b8b10000 > [ 2.682963] [0x34]:00000000 > [ 2.683139] [0x38]:b80a0000 > [ 2.683314] [0x3c]:00000000 > [ 2.683489] [0x40]:98597011 > [ 2.683665] [0x44]:00000153 > [ 2.729849] offset:data > [ 2.730089] [0x00]:02050004 > [ 2.730349] [0x04]:00000000 > [ 2.730586] [0x08]:00000000 > [ 2.730822] [0x0c]:00000000 > [ 2.731058] [0x10]:00000000 > [ 2.731295] mpt2sas_cm1: _base_event_notification > [ 2.731606] mpt2sas_cm1: _base_event_notification: complete > [ 2.732501] mpt2sas_cm1: LSISAS2008: FWVersion(20.00.04.00), > ChipRevision(0x02), BiosVersion(07.39.00.00) > [ 2.733010] mpt2sas_cm1: Protocol=( > [ 2.733074] Initiator > [ 2.733339] ,Target > [ 2.733384] ), > [ 2.733642] Capabilities=( > [ 2.733696] TLR > [ 2.733952] ,EEDP > [ 2.733995] ,Snapshot Buffer > [ 2.734268] ,Diag Trace Buffer > [ 2.734326] ,Task Set Full > [ 2.734595] ,NCQ > [ 2.734637] ) > [ 2.735155] scsi host1: Fusion MPT SAS Host > [ 2.749047] mpt2sas_cm1: sending port enable !! > [ 2.749563] mpt2sas_cm1: Discovery: (start) > > [ 2.749989] mpt2sas_cm1: SAS Enclosure Device Status Change > [ 2.750001] mpt2sas_cm1: discovery event: (start) > > [ 2.750578] mpt2sas_cm1: SAS Topology Change List > [ 2.750788] mpt2sas_cm1: Discovery: (stop) > > [ 2.751181] mpt2sas_cm1: Discovery: (start) > > [ 2.751571] mpt2sas_cm1: Discovery: (stop) > > [ 2.752002] mpt2sas_cm1: Discovery: (start) > > [ 2.752391] mpt2sas_cm1: Discovery: (stop) > > [ 2.752779] mpt2sas_cm1: Discovery: (start) > > [ 2.754205] mpt2sas_cm1: Discovery: (stop) > > [ 2.754593] mpt2sas_cm1: Discovery: (start) > > [ 2.754983] mpt2sas_cm1: Discovery: (stop) > > [ 2.755371] mpt2sas_cm1: Discovery: (start) > > [ 2.755762] mpt2sas_cm1: Discovery: (stop) > > [ 2.759602] mpt2sas_cm1: host_add: handle(0x0001), > sas_addr(0x500605b0026f79b0), phys(8) > [ 2.759969] mpt2sas_cm1: enclosure status change: (enclosure add) > handle(0x0001), enclosure logical > id(0x500605b0026f79b0) number slots(0) > [ 2.760407] mpt2sas_cm1: sas topology change: (responding) > [ 2.760612] handle(0x0000), enclosure_handle(0x0001) start_phy(00), > count(8) > [ 2.760834] phy(02), attached_handle(0x000e): target add: link > rate: new(0x0a), old(0x00) > [ 2.761066] phy(03), attached_handle(0x000b): target add: link > rate: new(0x0a), old(0x00) > [ 2.761304] phy(04), attached_handle(0x000d): target add: link > rate: new(0x09), old(0x00) > [ 2.761538] phy(05), attached_handle(0x0009): target add: link > rate: new(0x09), old(0x00) > [ 2.761771] phy(06), attached_handle(0x000a): target add: link > rate: new(0x09), old(0x00) > [ 2.762002] phy(07), attached_handle(0x000c): target add: link > rate: new(0x09), old(0x00) > [ 2.762235] mpt2sas_cm1: updating handles for sas_host(0x500605b0026f79b0) > [ 2.763653] mpt2sas_cm1: _scsih_sas_device_init_add: handle(0x000e), > sas_addr(0x4433221102000000) > [ 2.764036] mpt2sas_cm1: _scsih_sas_device_init_add: enclosure logical > id(0x500605b0026f79b0), slot( 1) > [ 2.764772] mpt2sas_cm1: _scsih_sas_device_init_add: handle(0x000b), > sas_addr(0x4433221103000000) > [ 2.765147] mpt2sas_cm1: _scsih_sas_device_init_add: enclosure logical > id(0x500605b0026f79b0), slot( 0) > [ 2.765891] mpt2sas_cm1: _scsih_sas_device_init_add: handle(0x000d), > sas_addr(0x4433221104000000) > [ 2.767250] mpt2sas_cm1: _scsih_sas_device_init_add: enclosure logical > id(0x500605b0026f79b0), slot( 7) > [ 2.768009] mpt2sas_cm1: _scsih_sas_device_init_add: handle(0x0009), > sas_addr(0x4433221105000000) > [ 2.768394] mpt2sas_cm1: _scsih_sas_device_init_add: enclosure logical > id(0x500605b0026f79b0), slot( 6) > [ 2.769136] mpt2sas_cm1: _scsih_sas_device_init_add: handle(0x000a), > sas_addr(0x4433221106000000) > [ 2.769510] mpt2sas_cm1: _scsih_sas_device_init_add: enclosure logical > id(0x500605b0026f79b0), slot( 5) > [ 2.769888] mpt2sas_cm1: _scsih_determine_boot_device: > current_boot_device(0x4433221106000000) > [ 2.770641] mpt2sas_cm1: _scsih_sas_device_init_add: handle(0x000c), > sas_addr(0x4433221107000000) > [ 2.771025] mpt2sas_cm1: _scsih_sas_device_init_add: enclosure logical > id(0x500605b0026f79b0), slot( 4) > [ 2.771405] mpt2sas_cm1: discovery event: (stop) > > [ 2.771788] mpt2sas_cm1: discovery event: (start) > > [ 2.772172] mpt2sas_cm1: discovery event: (stop) > > [ 2.772554] mpt2sas_cm1: discovery event: (start) > > [ 2.772942] mpt2sas_cm1: discovery event: (stop) > > [ 2.773326] mpt2sas_cm1: discovery event: (start) > > [ 2.773709] mpt2sas_cm1: discovery event: (stop) > > [ 2.774090] mpt2sas_cm1: discovery event: (start) > > [ 2.774474] mpt2sas_cm1: discovery event: (stop) > > [ 2.774855] mpt2sas_cm1: discovery event: (start) > > [ 2.775237] mpt2sas_cm1: discovery event: (stop) > > [ 2.775619] mpt2sas_cm1: port enable: complete from worker thread > [ 2.780192] mpt2sas_cm1: port enable: SUCCESS > [ 2.782404] scsi 1:0:0:0: Direct-Access ATA Hitachi HDP72505 A5BA > PQ: 0 ANSI: 6 > [ 2.782651] scsi 1:0:0:0: SATA: handle(0x000a), > sas_addr(0x4433221106000000), phy(6), device_name(0x5000cca34dc05584) > [ 2.783039] scsi 1:0:0:0: SATA: enclosure_logical_id(0x500605b0026f79b0), > slot(5) > [ 2.783390] scsi 1:0:0:0: atapi(n), ncq(y), asyn_notify(n), smart(y), > fua(y), sw_preserve(y) > [ 2.803032] scsi 1:0:1:0: Direct-Access ATA ST8000AS0002-1NA AR15 > PQ: 0 ANSI: 6 > [ 2.803272] scsi 1:0:1:0: SATA: handle(0x000e), > sas_addr(0x4433221102000000), phy(2), device_name(0x5000c500908f1d05) > [ 2.803660] scsi 1:0:1:0: SATA: enclosure_logical_id(0x500605b0026f79b0), > slot(1) > [ 2.803981] scsi 1:0:1:0: atapi(n), ncq(y), asyn_notify(n), smart(y), > fua(y), sw_preserve(y) > [ 2.821712] scsi 1:0:2:0: Direct-Access ATA ST3000DM001-1CH1 CC43 > PQ: 0 ANSI: 6 > [ 2.821963] scsi 1:0:2:0: SATA: handle(0x000b), > sas_addr(0x4433221103000000), phy(3), device_name(0x5000c5004dfd2a8a) > [ 2.822352] scsi 1:0:2:0: SATA: enclosure_logical_id(0x500605b0026f79b0), > slot(0) > [ 2.822694] scsi 1:0:2:0: atapi(n), ncq(y), asyn_notify(n), smart(y), > fua(y), sw_preserve(y) > [ 2.844233] scsi 1:0:3:0: Direct-Access ATA ST3500320NS SN16 > PQ: 0 ANSI: 6 > [ 2.844483] scsi 1:0:3:0: SATA: handle(0x000d), > sas_addr(0x4433221104000000), phy(4), device_name(0x5000c50009dca65b) > [ 2.844870] scsi 1:0:3:0: SATA: enclosure_logical_id(0x500605b0026f79b0), > slot(7) > [ 2.845216] scsi 1:0:3:0: atapi(n), ncq(y), asyn_notify(n), smart(y), > fua(y), sw_preserve(y) > [ 2.868963] scsi 1:0:4:0: Direct-Access ATA SAMSUNG HD401LJ 0-15 > PQ: 0 ANSI: 6 > [ 2.870994] scsi 1:0:4:0: SATA: handle(0x0009), > sas_addr(0x4433221105000000), phy(5), device_name(0x695d550daf678093) > [ 2.871382] scsi 1:0:4:0: SATA: enclosure_logical_id(0x500605b0026f79b0), > slot(6) > [ 2.871728] scsi 1:0:4:0: atapi(n), ncq(y), asyn_notify(n), smart(y), > fua(y), sw_preserve(y) > [ 2.894004] scsi 1:0:5:0: Direct-Access ATA ST3750330NS SN06 > PQ: 0 ANSI: 6 > [ 2.894257] scsi 1:0:5:0: SATA: handle(0x000c), > sas_addr(0x4433221107000000), phy(7), device_name(0x5000c5000266bb02) > [ 2.894646] scsi 1:0:5:0: SATA: enclosure_logical_id(0x500605b0026f79b0), > slot(4) > [ 2.894972] scsi 1:0:5:0: atapi(n), ncq(y), asyn_notify(n), smart(y), > fua(y), sw_preserve(y) I don't see a clear pattern yet, but I suspect warm rebooting >=4.2 after having run 4.1.x leads to sucessful driver inits. But I also remember having had cold boots, with kernels >=4.2 that worked fine (obviously not all of the time). <=4.1.20 kernels on the other hand boot fine every single time. Interestingly the igb driver (ethernet) seems to be acting up at least with 4.5.0 on exactly the same boots when mpt2sas init fails. I don't know whether this could be connected or not (I just became aware of this coincidence). --- Matthias Am 21.03.2016 um 05:53 schrieb Sreekanth Reddy: > Hi Matthias, > > Can you please share us the driver logs with driver logging_level set > to 0x3f8. So that we can get more info from this log. > > Thanks, > Sreekanth > > On Mon, Mar 21, 2016 at 1:44 AM, Matthias Prager > <[email protected]> wrote: >> Hello, >> >> I don't know what's the correct procedure, whether I should file a bug or >> first report this issue on the kernel mailing-list. So please feel free to >> tell me to open a ticket in the bugtracker (bugzilla.kernel.org?). >> >> But first let me present the issue I encounter: >> >> Kernels >= 4.2 (4.2.1 was the first on I tried, but also 4.3, 4.4 and 4.5) >> fail to load the mpt2sas driver on most (but not all) boots. Kernels <= >> 4.1.x work fine every single time (4.1.19 was the latest I tried, also >> 3.18.29). >> >> Here is the dmesg output for a failed driver init with Kernel 4.5.0: >>> [ 2.068313] mpt3sas version 09.102.00.00 loaded >>> [ 2.069412] mpt2sas_cm0: 32 BIT PCI BUS DMA ADDRESSING SUPPORTED, total >>> mem (3074748 kB) >>> [ 2.125260] mpt2sas_cm0: MSI-X vectors supported: 1, no of cores: 4, >>> max_msix_vectors: -1 >>> [ 2.125996] mpt2sas0-msix0: PCI-MSI-X enabled: IRQ 58 >>> [ 2.126199] mpt2sas_cm0: iomem(0x00000000fd4fc000), >>> mapped(0xffffc900000d0000), size(16384) >>> [ 2.126430] mpt2sas_cm0: ioport(0x0000000000004000), size(256) >>> [ 2.216371] mpt2sas_cm0: Allocated physical memory: size(4964 kB) >>> [ 2.216600] mpt2sas_cm0: Current Controller Queue Depth(3307),Max >>> Controller Queue Depth(3432) >>> [ 2.217004] mpt2sas_cm0: Scatter Gather Elements per IO(128) >>> [ 5.086959] floppy0: no floppy controllers found >>> [ 32.256720] mpt2sas_cm0: _base_event_notification: timeout >>> [ 32.256940] mf: >>> >>> [ 32.257106] 07000000 >>> [ 32.257302] 00000000 >>> [ 32.257337] 00000000 >>> [ 32.257533] 00000000 >>> [ 32.257568] 00000000 >>> [ 32.257764] 0f2f7fff >>> [ 32.257800] ffffff7c >>> [ 32.257995] ffffffff >>> [ 32.258031] >>> >>> [ 32.258352] ffffffff >>> [ 32.258387] 00000000 >>> [ 32.258582] 00000000 >>> >>> [ 32.258950] mpt2sas_cm0: sending message unit reset !! >>> [ 32.260688] mpt2sas_cm0: message unit reset: SUCCESS >>> [ 32.325956] mpt2sas_cm0: failure at >>> drivers/scsi/mpt3sas/mpt3sas_scsih.c:8592/_scsih_probe()! >> >> For comparison here is a dmesg output for a successful boot on Kernel 4.1.15: >>> [ 2.035568] mpt2sas version 20.100.00.00 loaded >>> [ 2.037243] mpt2sas0: 32 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem >>> (2046352 kB) >>> [ 2.755374] mpt2sas0: MSI-X vectors supported: 1, no of cores: 3, >>> max_msix_vectors: 8 >>> [ 2.756377] mpt2sas0-msix0: PCI-MSI-X enabled: IRQ 58 >>> [ 2.756708] mpt2sas0: iomem(0x00000000fd5fc000), >>> mapped(0xffffc900000d0000), size(16384) >>> [ 2.757083] mpt2sas0: ioport(0x0000000000004000), size(256) >>> [ 3.842944] mpt2sas0: Allocated physical memory: size(4964 kB) >>> [ 3.843303] mpt2sas0: Current Controller Queue Depth(3307), Max >>> Controller Queue Depth(3432) >>> [ 3.843717] mpt2sas0: Scatter Gather Elements per IO(128) >>> [ 4.415980] mpt2sas0: LSISAS2008: FWVersion(20.00.04.00), >>> ChipRevision(0x03), BiosVersion(07.39.00.00) >>> [ 4.416618] mpt2sas0: Protocol=(Initiator,Target), >>> Capabilities=(TLR,EEDP,Snapshot Buffer,Diag Trace Buffer,Task Set Full,NCQ) >>> [ 4.417846] scsi host0: Fusion MPT SAS Host >>> [ 4.436865] mpt2sas0: sending port enable !! >>> [ 4.440460] mpt2sas0: host_add: handle(0x0001), >>> sas_addr(0xxxxxxxxxxxxxxxxx), phys(8) >>> >>> ... >>> [ 4.444045] scsi 0:0:0:0: Direct-Access ATA Hitachi HDS5C302 >>> A800 PQ: 0 ANSI: 6 >>> [ 4.444338] scsi 0:0:0:0: SATA: handle(0x0009), >>> sas_addr(0xxxxxxxxxxxxxxxxx), phy(1), device_name(0xxxxxxxxxxxxxxxxx) >>> [ 4.444823] scsi 0:0:0:0: SATA: >>> enclosure_logical_id(0xxxxxxxxxxxxxxxxx), slot(2) >>> [ 4.445197] scsi 0:0:0:0: atapi(n), ncq(y), asyn_notify(n), smart(y), >>> fua(y), sw_preserve(y) >>> ... (n times for n drives) >>> >>> [ 4.515443] mpt2sas0: port enable: SUCCESS >> >> >> The Controller(s) are all Avego/LSI 9211-8i running the latest version of IT >> firmware (v20.00.04.00). These are passed through to a gentoo-linux VM on an >> ESXi 5.1 host (latest patchlevel). I have two of these systems (one >> production one testing) with nearly identical hardware (Supermicro X8DTi-F >> boards with 2x Intel Westmere CPUs). I also have an older set of systems >> running the same software config (Intel S3200SHLC boards with single >> Core2Quad) which exhibit the same buggy behavior. >> >> The 'uname -a' line on the current testing system looks like this: >>> Linux pserver2 4.1.19-gentoo #4 SMP Thu Mar 17 16:02:48 CET 2016 x86_64 >>> Intel(R) Xeon(R) CPU E5506 @ 2.13GHz GenuineIntel GNU/Linux >> p >> >> There seem to be other people with similar issues: >> <https://bbs.archlinux.org/viewtopic.php?id=209495> >> >> Any thoughts? >> >> --- >> Matthias -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
