This is a pci device but was not done in the usual way a pci driver is
done. Convert the driver into a proper pci driver.
Signed-off-by: Sudip Mukherjee <su...@vectorindia.org>
---
v1: only build warning related to "dptids defined but not used" was
fixed using #ifdef
drivers/scsi/dpt_i2o.c | 269 ++++++++++++++++++++++---------------------------
drivers/scsi/dpti.h | 5 +-
2 files changed, 120 insertions(+), 154 deletions(-)
diff --git a/drivers/scsi/dpt_i2o.c b/drivers/scsi/dpt_i2o.c
index d4cda5e..9f50d1ae 100644
--- a/drivers/scsi/dpt_i2o.c
+++ b/drivers/scsi/dpt_i2o.c
@@ -111,6 +111,7 @@ static int sys_tbl_len;
static adpt_hba* hba_chain = NULL;
static int hba_count = 0;
+static bool control_reg;
static struct class *adpt_sysfs_class;
@@ -187,118 +188,6 @@ static struct pci_device_id dptids[] = {
};
MODULE_DEVICE_TABLE(pci,dptids);
-static int adpt_detect(struct scsi_host_template* sht)
-{
- struct pci_dev *pDev = NULL;
- adpt_hba *pHba;
- adpt_hba *next;
-
- PINFO("Detecting Adaptec I2O RAID controllers...\n");
-
- /* search for all Adatpec I2O RAID cards */
- while ((pDev = pci_get_device( PCI_DPT_VENDOR_ID, PCI_ANY_ID, pDev))) {
- if(pDev->device == PCI_DPT_DEVICE_ID ||
- pDev->device == PCI_DPT_RAPTOR_DEVICE_ID){
- if(adpt_install_hba(sht, pDev) ){
- PERROR("Could not Init an I2O RAID device\n");
- PERROR("Will not try to detect others.\n");
- return hba_count-1;
- }
- pci_dev_get(pDev);
- }
- }
-
- /* In INIT state, Activate IOPs */
- for (pHba = hba_chain; pHba; pHba = next) {
- next = pHba->next;
- // Activate does get status , init outbound, and get hrt
- if (adpt_i2o_activate_hba(pHba) < 0) {
- adpt_i2o_delete_hba(pHba);
- }
- }
-
-
- /* Active IOPs in HOLD state */
-
-rebuild_sys_tab:
- if (hba_chain == NULL)
- return 0;
-
- /*
- * If build_sys_table fails, we kill everything and bail
- * as we can't init the IOPs w/o a system table
- */
- if (adpt_i2o_build_sys_table() < 0) {
- adpt_i2o_sys_shutdown();
- return 0;
- }
-
- PDEBUG("HBA's in HOLD state\n");
-
- /* If IOP don't get online, we need to rebuild the System table */
- for (pHba = hba_chain; pHba; pHba = pHba->next) {
- if (adpt_i2o_online_hba(pHba) < 0) {
- adpt_i2o_delete_hba(pHba);
- goto rebuild_sys_tab;
- }
- }
-
- /* Active IOPs now in OPERATIONAL state */
- PDEBUG("HBA's in OPERATIONAL state\n");
-
- printk("dpti: If you have a lot of devices this could take a few
minutes.\n");
- for (pHba = hba_chain; pHba; pHba = next) {
- next = pHba->next;
- printk(KERN_INFO"%s: Reading the hardware resource table.\n",
pHba->name);
- if (adpt_i2o_lct_get(pHba) < 0){
- adpt_i2o_delete_hba(pHba);
- continue;
- }
-
- if (adpt_i2o_parse_lct(pHba) < 0){
- adpt_i2o_delete_hba(pHba);
- continue;
- }
- adpt_inquiry(pHba);
- }
-
- adpt_sysfs_class = class_create(THIS_MODULE, "dpt_i2o");
- if (IS_ERR(adpt_sysfs_class)) {
- printk(KERN_WARNING"dpti: unable to create dpt_i2o class\n");
- adpt_sysfs_class = NULL;
- }
-
- for (pHba = hba_chain; pHba; pHba = next) {
- next = pHba->next;
- if (adpt_scsi_host_alloc(pHba, sht) < 0){
- adpt_i2o_delete_hba(pHba);
- continue;
- }
- pHba->initialized = TRUE;
- pHba->state &= ~DPTI_STATE_RESET;
- if (adpt_sysfs_class) {
- struct device *dev = device_create(adpt_sysfs_class,
- NULL, MKDEV(DPTI_I2O_MAJOR, pHba->unit), NULL,
- "dpti%d", pHba->unit);
- if (IS_ERR(dev)) {
- printk(KERN_WARNING"dpti%d: unable to "
- "create device in dpt_i2o class\n",
- pHba->unit);
- }
- }
- }
-
- // Register our control device node
- // nodes will need to be created in /dev to access this
- // the nodes can not be created from within the driver
- if (hba_count && register_chrdev(DPTI_I2O_MAJOR, DPT_DRIVER,
&adpt_fops)) {
- adpt_i2o_sys_shutdown();
- return 0;
- }
- return hba_count;
-}
-
-
/*
* scsi_unregister will be called AFTER we return.
*/
@@ -901,7 +790,8 @@ static void adpt_i2o_sys_shutdown(void)
printk(KERN_INFO "Adaptec I2O controllers down.\n");
}
-static int adpt_install_hba(struct scsi_host_template* sht, struct pci_dev*
pDev)
+static adpt_hba *adpt_install_hba(struct scsi_host_template *sht,
+ struct pci_dev *pDev)
{
adpt_hba* pHba = NULL;
@@ -917,12 +807,12 @@ static int adpt_install_hba(struct scsi_host_template*
sht, struct pci_dev* pDev
int raptorFlag = FALSE;
if(pci_enable_device(pDev)) {
- return -EINVAL;
+ return ERR_PTR(-EINVAL);
}
if (pci_request_regions(pDev, "dpt_i2o")) {
PERROR("dpti: adpt_config_hba: pci request region failed\n");
- return -EINVAL;
+ return ERR_PTR(-EINVAL);
}
pci_set_master(pDev);
@@ -936,7 +826,7 @@ static int adpt_install_hba(struct scsi_host_template* sht,
struct pci_dev* pDev
dma64 = 1;
}
if (!dma64 && pci_set_dma_mask(pDev, DMA_BIT_MASK(32)) != 0)
- return -EINVAL;
+ return ERR_PTR(-EINVAL);
/* adapter only supports message blocks below 4GB */
pci_set_consistent_dma_mask(pDev, DMA_BIT_MASK(32));
@@ -984,7 +874,7 @@ static int adpt_install_hba(struct scsi_host_template* sht,
struct pci_dev* pDev
if (!base_addr_virt) {
pci_release_regions(pDev);
PERROR("dpti: adpt_config_hba: io remap failed\n");
- return -EINVAL;
+ return ERR_PTR(-EINVAL);
}
if(raptorFlag == TRUE) {
@@ -993,7 +883,7 @@ static int adpt_install_hba(struct scsi_host_template* sht,
struct pci_dev* pDev
PERROR("dpti: adpt_config_hba: io remap failed on
BAR1\n");
iounmap(base_addr_virt);
pci_release_regions(pDev);
- return -EINVAL;
+ return ERR_PTR(-EINVAL);
}
} else {
msg_addr_virt = base_addr_virt;
@@ -1006,7 +896,7 @@ static int adpt_install_hba(struct scsi_host_template*
sht, struct pci_dev* pDev
iounmap(msg_addr_virt);
iounmap(base_addr_virt);
pci_release_regions(pDev);
- return -ENOMEM;
+ return ERR_PTR(-ENOMEM);
}
mutex_lock(&adpt_configuration_lock);
@@ -1065,10 +955,10 @@ static int adpt_install_hba(struct scsi_host_template*
sht, struct pci_dev* pDev
if (request_irq (pDev->irq, adpt_isr, IRQF_SHARED, pHba->name, pHba)) {
printk(KERN_ERR"%s: Couldn't register IRQ %d\n", pHba->name,
pDev->irq);
adpt_i2o_delete_hba(pHba);
- return -EINVAL;
+ return ERR_PTR(-EINVAL);
}
- return 0;
+ return pHba;
}
@@ -3568,47 +3458,124 @@ static struct scsi_host_template driver_template = {
.use_clustering = ENABLE_CLUSTERING,
};
-static int __init adpt_init(void)
+static int adpt_pci_probe(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
{
- int error;
- adpt_hba *pHba, *next;
+ struct scsi_host_template *sht = &driver_template;
+ adpt_hba *pHba, *pHba_temp;
+ int err;
- printk("Loading Adaptec I2O RAID: Version " DPT_I2O_VERSION "\n");
+ pHba = adpt_install_hba(sht, pdev);
+ if (IS_ERR(pHba)) {
+ PERROR("Could not Init an I2O RAID device\n");
+ return PTR_ERR(pHba);
+ }
- error = adpt_detect(&driver_template);
- if (error < 0)
- return error;
- if (hba_chain == NULL)
- return -ENODEV;
+ /*
+ * In INIT state, Activate IOPs
+ * Activate does get status , init outbound, and get hrt
+ */
+ if (adpt_i2o_activate_hba(pHba) < 0)
+ adpt_i2o_delete_hba(pHba);
- for (pHba = hba_chain; pHba; pHba = pHba->next) {
- error = scsi_add_host(pHba->host, &pHba->pDev->dev);
- if (error)
- goto fail;
- scsi_scan_host(pHba->host);
+ /* Active IOPs in HOLD state */
+
+rebuild_sys_tab:
+ /*
+ * If build_sys_table fails, we kill everything and bail
+ * as we can't init the IOPs w/o a system table
+ */
+ if (adpt_i2o_build_sys_table() < 0) {
+ adpt_i2o_sys_shutdown();
+ return -EIO;
}
- return 0;
-fail:
- for (pHba = hba_chain; pHba; pHba = next) {
- next = pHba->next;
- scsi_remove_host(pHba->host);
+
+ PDEBUG("HBA's in HOLD state\n");
+
+ /* If IOP don't get online, we need to rebuild the System table */
+ for (pHba_temp = hba_chain; pHba_temp; pHba_temp = pHba_temp->next) {
+ if (adpt_i2o_online_hba(pHba_temp) < 0) {
+ adpt_i2o_delete_hba(pHba_temp);
+ goto rebuild_sys_tab;
+ }
}
- return error;
+
+ /* Active IOPs now in OPERATIONAL state */
+ PDEBUG("%s: HBA in OPERATIONAL state\n", pHba->name);
+
+ if (adpt_i2o_lct_get(pHba) < 0) {
+ adpt_i2o_delete_hba(pHba);
+ return -EIO;
+ }
+ if (adpt_i2o_parse_lct(pHba) < 0) {
+ adpt_i2o_delete_hba(pHba);
+ return -EIO;
+ }
+ adpt_inquiry(pHba);
+
+ if (!adpt_sysfs_class) {
+ adpt_sysfs_class = class_create(THIS_MODULE, "dpt_i2o");
+ if (IS_ERR(adpt_sysfs_class)) {
+ printk(KERN_WARNING
+ "dpti: unable to create dpt_i2o class\n");
+ adpt_sysfs_class = NULL;
+ }
+ }
+ if (adpt_scsi_host_alloc(pHba, sht) < 0) {
+ adpt_i2o_delete_hba(pHba);
+ return -EIO;
+ }
+
+ pHba->initialized = TRUE;
+ pHba->state &= ~DPTI_STATE_RESET;
+ if (adpt_sysfs_class) {
+ struct device *dev = device_create(adpt_sysfs_class,
+ NULL, MKDEV(DPTI_I2O_MAJOR, pHba->unit), NULL,
+ "dpti%d", pHba->unit);
+ if (IS_ERR(dev)) {
+ printk(KERN_WARNING
+ "dpti%d: unable to create device in dpt_i2o
class\n",
+ pHba->unit);
+ }
+ }
+
+ /*
+ * Register our control device node
+ * nodes will need to be created in /dev to access this
+ * the nodes can not be created from within the driver
+ */
+ if (!control_reg && hba_count) {
+ if (register_chrdev(DPTI_I2O_MAJOR, DPT_DRIVER, &adpt_fops)) {
+ adpt_i2o_sys_shutdown();
+ return -EIO;
+ }
+ control_reg = true;
+ }
+
+ err = scsi_add_host(pHba->host, &pHba->pDev->dev);
+ if (err)
+ return err;
+
+ scsi_scan_host(pHba->host);
+ pci_set_drvdata(pdev, pHba);
+
+ return 0;
}
-static void __exit adpt_exit(void)
+static void adpt_pci_remove(struct pci_dev *pdev)
{
- adpt_hba *pHba, *next;
+ adpt_hba *pHba = pci_get_drvdata(pdev);
- for (pHba = hba_chain; pHba; pHba = pHba->next)
- scsi_remove_host(pHba->host);
- for (pHba = hba_chain; pHba; pHba = next) {
- next = pHba->next;
- adpt_release(pHba->host);
- }
+ scsi_remove_host(pHba->host);
+ adpt_release(pHba->host);
}
-module_init(adpt_init);
-module_exit(adpt_exit);
+static struct pci_driver adpt_driver = {
+ .name = "adpt",
+ .id_table = dptids,
+ .probe = adpt_pci_probe,
+ .remove = adpt_pci_remove,
+};
+module_pci_driver(adpt_driver);
MODULE_LICENSE("GPL");
diff --git a/drivers/scsi/dpti.h b/drivers/scsi/dpti.h
index 1fa345a..e3481a4 100644
--- a/drivers/scsi/dpti.h
+++ b/drivers/scsi/dpti.h
@@ -28,7 +28,6 @@
* SCSI interface function Prototypes
*/
-static int adpt_detect(struct scsi_host_template * sht);
static int adpt_queue(struct Scsi_Host *h, struct scsi_cmnd * cmd);
static int adpt_abort(struct scsi_cmnd * cmd);
static int adpt_reset(struct scsi_cmnd* cmd);
@@ -265,7 +264,6 @@ struct sg_simple_element {
*/
static void adpt_i2o_sys_shutdown(void);
-static int adpt_init(void);
static int adpt_i2o_build_sys_table(void);
static irqreturn_t adpt_isr(int irq, void *dev_id);
@@ -301,7 +299,8 @@ static void adpt_i2o_delete_hba(adpt_hba* pHba);
static void adpt_inquiry(adpt_hba* pHba);
static void adpt_fail_posted_scbs(adpt_hba* pHba);
static struct adpt_device* adpt_find_device(adpt_hba* pHba, u32 chan, u32 id,
u64 lun);
-static int adpt_install_hba(struct scsi_host_template* sht, struct pci_dev*
pDev) ;
+static adpt_hba *adpt_install_hba(struct scsi_host_template *sht,
+ struct pci_dev *pDev);
static int adpt_i2o_online_hba(adpt_hba* pHba);
static void adpt_i2o_post_wait_complete(u32, int);
static int adpt_i2o_systab_send(adpt_hba* pHba);
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
