On Sun, 29 Nov 2015, Ondrej Zary wrote:

> Add I/O register mapping for NCR53C400A and enable PDMA mode to
> improve performance and fix non-working IRQ.
> 
> Tested with HP C2502 (and user-space enabler).
> 
> Signed-off-by: Ondrej Zary <li...@rainbow-software.org>
> ---
>  drivers/scsi/g_NCR5380.c |   11 ++++++++++-
>  1 file changed, 10 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/scsi/g_NCR5380.c b/drivers/scsi/g_NCR5380.c
> index ce444da..c3abe48 100644
> --- a/drivers/scsi/g_NCR5380.c
> +++ b/drivers/scsi/g_NCR5380.c
> @@ -324,7 +324,10 @@ static int __init generic_NCR5380_detect(struct 
> scsi_host_template *tpnt)
>  #endif
>                       break;
>               case BOARD_NCR53C400A:
> +                     flags = FLAG_NO_DMA_FIXUP;
> +#ifndef PSEUDO_DMA
>                       flags = FLAG_NO_PSEUDO_DMA;
> +#endif

FLAG_NO_PSEUDO_DMA is not tested unless defined(PSEUDO_DMA), so it 
shouldn't be set here. I know I made the same mistake in patch 8; it will 
be fixed in the next submission.

-- 

>                       ports = ncr_53c400a_ports;
>                       break;
>               case BOARD_DTC3181E:
> @@ -412,6 +415,11 @@ static int __init generic_NCR5380_detect(struct 
> scsi_host_template *tpnt)
>                       hostdata->c400_blk_cnt = 1;
>                       hostdata->c400_host_buf = 4;
>               }
> +             if (overrides[current_override].board == BOARD_NCR53C400A) {
> +                     hostdata->c400_ctl_status = 9;
> +                     hostdata->c400_blk_cnt = 10;
> +                     hostdata->c400_host_buf = 8;
> +             }
>  #else
>               instance->base = overrides[current_override].NCR5380_map_name;
>               hostdata->iomem = iomem;
> @@ -425,7 +433,8 @@ static int __init generic_NCR5380_detect(struct 
> scsi_host_template *tpnt)
>               if (NCR5380_init(instance, flags))
>                       goto out_unregister;
>  
> -             if (overrides[current_override].board == BOARD_NCR53C400)
> +             if (overrides[current_override].board == BOARD_NCR53C400 ||
> +                 overrides[current_override].board == BOARD_NCR53C400A)
>                       NCR5380_write(hostdata->c400_ctl_status, CSR_BASE);
>  
>               NCR5380_maybe_reset_bus(instance);
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to