On 29.7.2015 08:27, viswa...@pmcs.com wrote:
> From: Viswas G <viswa...@pmcs.com>
>
> In Nexus reset the device state set to DS_IN_RECOVERY before doing
> phy reset and internal cleanup. Once internal cleanup finishes,
> the device state will set to DS_OPERATIONAL.
>
> Signed-off-by: Viswas G <viswa...@pmcs.com>
> Signed-off-by: Suresh Thiagarajan <suresh.thiagara...@pmcs.com>
> ---
> drivers/scsi/pm8001/pm8001_sas.c | 14 +++++++++++---
> drivers/scsi/pm8001/pm8001_sas.h | 8 ++++++++
> 2 files changed, 19 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/scsi/pm8001/pm8001_sas.c
> b/drivers/scsi/pm8001/pm8001_sas.c
> index b93f289..4e6955f 100644
> --- a/drivers/scsi/pm8001/pm8001_sas.c
> +++ b/drivers/scsi/pm8001/pm8001_sas.c
> @@ -980,13 +980,21 @@ int pm8001_I_T_nexus_reset(struct domain_device *dev)
> rc = 0;
> goto out;
> }
> + pm8001_dev->setds_completion = &completion_setstate;
> + PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha,
> + pm8001_dev, DS_IN_RECOVERY);
> + wait_for_completion(&completion_setstate);
> rc = sas_phy_reset(phy, 1);
> msleep(2000);
> + if (rc) {
> + PM8001_EH_DBG(pm8001_ha,
> + pm8001_printk("phy reset failed for device %x\n"
> + "with rc %d\n", pm8001_dev->device_id, rc));
> + }
> rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev ,
> dev, 1, 0);
> - pm8001_dev->setds_completion = &completion_setstate;
> - rc = PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha,
> - pm8001_dev, 0x01);
> + PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha,
> + pm8001_dev, DS_OPERATIONAL);
Hi Viswas,
the set_dev_state_req can't fail any more ? Also the
pm8001_exec_internal_task_abort may fail - shouldn't
be error handling also added ?
Cheers,
Tomas
> wait_for_completion(&completion_setstate);
> } else {
> rc = sas_phy_reset(phy, 1);
> diff --git a/drivers/scsi/pm8001/pm8001_sas.h
> b/drivers/scsi/pm8001/pm8001_sas.h
> index 8dd8b78..c9736cc 100644
> --- a/drivers/scsi/pm8001/pm8001_sas.h
> +++ b/drivers/scsi/pm8001/pm8001_sas.h
> @@ -569,6 +569,14 @@ struct pm8001_fw_image_header {
> #define NCQ_READ_LOG_FLAG 0x80000000
> #define NCQ_ABORT_ALL_FLAG 0x40000000
> #define NCQ_2ND_RLE_FLAG 0x20000000
> +
> +/* Device states */
> +#define DS_OPERATIONAL 0x01
> +#define DS_PORT_IN_RESET 0x02
> +#define DS_IN_RECOVERY 0x03
> +#define DS_IN_ERROR 0x04
> +#define DS_NON_OPERATIONAL 0x07
> +
> /**
> * brief param structure for firmware flash update.
> */
>
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
