The ioport region is 0x20 bytes long so accessing 0x3a register using
writeb_io is incorrect. Use writeb_base instead.
There's no change in behavior as 870 chips have ioport = baseport.
Signed-off-by: Ondrej Zary <li...@rainbow-software.org>
---
drivers/scsi/atp870u.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/scsi/atp870u.c b/drivers/scsi/atp870u.c
index c4a59cc..04b29d3 100644
--- a/drivers/scsi/atp870u.c
+++ b/drivers/scsi/atp870u.c
@@ -364,9 +364,9 @@ static irqreturn_t atp870u_intr_handle(int irq, void
*dev_id)
atp_writeb_base(dev, 0x3b,
atp_readb_base(dev, 0x3b) & 0x3f);
} else {
if ((workreq->cmnd[0] == 0x08) ||
(workreq->cmnd[0] == 0x28) || (workreq->cmnd[0] == 0x0a) || (workreq->cmnd[0]
== 0x2a))
- atp_writeb_io(dev, c, 0x3a,
(atp_readb_io(dev, c, 0x3a) & 0xf3) | 0x08);
+ atp_writeb_base(dev, 0x3a,
(atp_readb_base(dev, 0x3a) & 0xf3) | 0x08);
else
- atp_writeb_io(dev, c, 0x3a,
atp_readb_io(dev, c, 0x3a) & 0xf3);
+ atp_writeb_base(dev, 0x3a,
atp_readb_base(dev, 0x3a) & 0xf3);
}
j = 0;
id = 1;
@@ -889,9 +889,9 @@ static void send_s870(struct atp_unit *dev,unsigned char c)
atp_writeb_base(dev, 0x3b, atp_readb_base(dev, 0x3b) &
0x3f);
} else {
if ((workreq->cmnd[0] == 0x08) || (workreq->cmnd[0] == 0x28) ||
(workreq->cmnd[0] == 0x0a) || (workreq->cmnd[0] == 0x2a))
- atp_writeb_io(dev, c, 0x3a, (atp_readb_io(dev, c, 0x3a)
& 0xf3) | 0x08);
+ atp_writeb_base(dev, 0x3a, (atp_readb_base(dev, 0x3a) &
0xf3) | 0x08);
else
- atp_writeb_io(dev, c, 0x3a, atp_readb_io(dev, c, 0x3a)
& 0xf3);
+ atp_writeb_base(dev, 0x3a, atp_readb_base(dev, 0x3a) &
0xf3);
}
if(workreq->sc_data_direction == DMA_TO_DEVICE) {
--
Ondrej Zary
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
