As tcm_loop emulates a SAS HBA it should not only
attach to the SAS transport template but also
populate the SAS device hierarchy.
Signed-off-by: Hannes Reinecke <h...@suse.de>
---
drivers/target/loopback/tcm_loop.c | 139 ++++++++++++++++++++++++++++++++-----
drivers/target/loopback/tcm_loop.h | 3 +
2 files changed, 125 insertions(+), 17 deletions(-)
diff --git a/drivers/target/loopback/tcm_loop.c
b/drivers/target/loopback/tcm_loop.c
index 45ae3e4..7d436db 100644
--- a/drivers/target/loopback/tcm_loop.c
+++ b/drivers/target/loopback/tcm_loop.c
@@ -439,6 +439,9 @@ static int tcm_loop_driver_remove(struct device *dev)
tl_hba = to_tcm_loop_hba(dev);
sh = tl_hba->sh;
+ if (tl_hba->tl_proto_id == SCSI_PROTOCOL_SAS)
+ sas_remove_host(sh);
+
scsi_remove_host(sh);
scsi_host_put(sh);
return 0;
@@ -729,10 +732,18 @@ static int tcm_loop_port_link(
struct tcm_loop_hba *tl_hba = tl_tpg->tl_hba;
atomic_inc_mb(&tl_tpg->tl_tpg_port_count);
- /*
- * Add Linux/SCSI struct scsi_device by HCTL
- */
- scsi_add_device(tl_hba->sh, 0, tl_tpg->tl_tpgt, lun->unpacked_lun);
+ if (tl_hba->tl_proto_id != SCSI_PROTOCOL_SAS) {
+ /*
+ * Add Linux/SCSI struct scsi_device by HCTL
+ */
+ scsi_add_device(tl_hba->sh, 0,
+ tl_tpg->tl_tpgt, lun->unpacked_lun);
+ } else {
+ struct sas_rphy *rphy = tl_tpg->sas_rphy;
+
+ scsi_scan_target(&rphy->dev, 0, rphy->scsi_target_id,
+ lun->unpacked_lun, 0);
+ }
pr_debug("TCM_Loop_ConfigFS: Port Link Successful\n");
return 0;
@@ -749,19 +760,21 @@ static void tcm_loop_port_unlink(
tl_tpg = container_of(se_tpg, struct tcm_loop_tpg, tl_se_tpg);
tl_hba = tl_tpg->tl_hba;
- sd = scsi_device_lookup(tl_hba->sh, 0, tl_tpg->tl_tpgt,
- se_lun->unpacked_lun);
- if (!sd) {
- pr_err("Unable to locate struct scsi_device for %d:%d:"
- "%llu\n", 0, tl_tpg->tl_tpgt, se_lun->unpacked_lun);
- return;
+ if (tl_hba->tl_proto_id != SCSI_PROTOCOL_SAS) {
+ sd = scsi_device_lookup(tl_hba->sh, 0, tl_tpg->tl_tpgt,
+ se_lun->unpacked_lun);
+ if (!sd) {
+ pr_err("Unable to locate struct scsi_device for %d:%d:"
+ "%llu\n", 0, tl_tpg->tl_tpgt,
+ se_lun->unpacked_lun);
+ return;
+ }
+ /*
+ * Remove Linux/SCSI struct scsi_device by HCTL
+ */
+ scsi_remove_device(sd);
+ scsi_device_put(sd);
}
- /*
- * Remove Linux/SCSI struct scsi_device by HCTL
- */
- scsi_remove_device(sd);
- scsi_device_put(sd);
-
atomic_dec_mb(&tl_tpg->tl_tpg_port_count);
pr_debug("TCM_Loop_ConfigFS: Port Unlink Successful\n");
@@ -858,6 +871,33 @@ static int tcm_loop_make_nexus(
pr_debug("TCM_Loop_ConfigFS: Established I_T Nexus to emulated"
" %s Initiator Port: %s\n", tcm_loop_dump_proto_id(tl_hba),
name);
+
+ if (tl_hba->tl_proto_id == SCSI_PROTOCOL_SAS) {
+ struct Scsi_Host *sh = tl_hba->sh;
+ u64 sas_address;
+
+ if (kstrtoull(name, 16, &sas_address)) {
+ pr_err("Invalid SAS address %s\n", name);
+ return -ENODEV;
+ }
+ tl_nexus->sas_phy = sas_phy_alloc(&sh->shost_gendev,
+ tl_tpg->tl_tpgt);
+ if (!tl_nexus->sas_phy) {
+ pr_err("Unable to allocate SAS host phy\n");
+ return -ENOMEM;
+ }
+ tl_nexus->sas_phy->identify.sas_address = sas_address;
+ tl_nexus->sas_phy->identify.phy_identifier = 0;
+ tl_nexus->sas_phy->identify.device_type = SAS_END_DEVICE;
+ tl_nexus->sas_phy->identify.initiator_port_protocols =
SAS_PROTOCOL_STP|SAS_PROTOCOL_SMP;
+ if (sas_phy_add(tl_nexus->sas_phy)) {
+ sas_phy_free(tl_nexus->sas_phy);
+ tl_nexus->sas_phy = NULL;
+ pr_err("Unable to add SAS host phy\n");
+ return -ENODEV;
+ }
+ sas_port_add_phy(tl_tpg->sas_port, tl_nexus->sas_phy);
+ }
return 0;
out:
@@ -886,6 +926,13 @@ static int tcm_loop_drop_nexus(
return -EPERM;
}
+ if (tl_nexus->sas_phy) {
+ sas_port_delete_phy(tpg->sas_port, tl_nexus->sas_phy);
+ sas_phy_delete(tl_nexus->sas_phy);
+ sas_phy_free(tl_nexus->sas_phy);
+ tl_nexus->sas_phy = NULL;
+ }
+
pr_debug("TCM_Loop_ConfigFS: Removing I_T Nexus to emulated"
" %s Initiator Port: %s\n", tcm_loop_dump_proto_id(tpg->tl_hba),
tl_nexus->se_sess->se_node_acl->initiatorname);
@@ -956,7 +1003,7 @@ static ssize_t tcm_loop_tpg_store_nexus(
tcm_loop_dump_proto_id(tl_hba));
return -EINVAL;
}
- port_ptr = &i_port[0];
+ port_ptr = &i_port[4];
goto check_newline;
}
ptr = strstr(i_port, "fc.");
@@ -1089,6 +1136,48 @@ static struct se_portal_group *tcm_loop_make_naa_tpg(
if (ret < 0)
return ERR_PTR(-ENOMEM);
+ if (tl_hba->tl_proto_id == SCSI_PROTOCOL_SAS) {
+ struct Scsi_Host *sh = tl_hba->sh;
+ u64 sas_address;
+
+ tl_tpg->sas_port = sas_port_alloc(&sh->shost_gendev, tpgt);
+ if (!tl_tpg->sas_port) {
+ pr_err("Unable to allocate SAS port %ld\n", tpgt);
+ return ERR_PTR(-ENOMEM);
+ }
+ if ((sas_port_add(tl_tpg->sas_port))) {
+ sas_port_free(tl_tpg->sas_port);
+ tl_tpg->sas_port = NULL;
+ pr_err("Unable to add SAS port %ld\n", tpgt);
+ return ERR_PTR(-ENODEV);
+ }
+ if (kstrtoull(tl_hba->tl_wwn_address, 16, &sas_address)) {
+ pr_err("Invalid SAS address %s\n",
+ tl_hba->tl_wwn_address);
+ sas_port_free(tl_tpg->sas_port);
+ tl_tpg->sas_port = NULL;
+ return ERR_PTR(-ENODEV);
+ }
+ tl_tpg->sas_rphy = sas_end_device_alloc(tl_tpg->sas_port);
+ if (!tl_tpg->sas_rphy) {
+ pr_err("Unable to allocate SAS end device\n");
+ sas_port_free(tl_tpg->sas_port);
+ tl_tpg->sas_port = NULL;
+ return ERR_PTR(-ENOMEM);
+ }
+ tl_tpg->sas_rphy->identify.sas_address = sas_address;
+ tl_tpg->sas_rphy->identify.phy_identifier = 0;
+ tl_tpg->sas_rphy->identify.device_type = SAS_END_DEVICE;
+ tl_tpg->sas_rphy->identify.target_port_protocols =
SAS_PROTOCOL_STP|SAS_PROTOCOL_SMP;
+ if (sas_rphy_add(tl_tpg->sas_rphy)) {
+ sas_rphy_free(tl_tpg->sas_rphy);
+ tl_tpg->sas_rphy = NULL;
+ sas_port_free(tl_tpg->sas_port);
+ tl_tpg->sas_port = NULL;
+ pr_err("Unable to add SAS target phy\n");
+ return ERR_PTR(-ENODEV);
+ }
+ }
pr_debug("TCM_Loop_ConfigFS: Allocated Emulated %s"
" Target Port %s,t,0x%04lx\n", tcm_loop_dump_proto_id(tl_hba),
config_item_name(&wwn->wwn_group.cg_item), tpgt);
@@ -1107,10 +1196,25 @@ static void tcm_loop_drop_naa_tpg(
tl_hba = tl_tpg->tl_hba;
tpgt = tl_tpg->tl_tpgt;
+
+ if (tl_hba->tl_proto_id == SCSI_PROTOCOL_SAS)
+ sas_rphy_delete(tl_tpg->sas_rphy);
+
/*
* Release the I_T Nexus for the Virtual SAS link if present
*/
tcm_loop_drop_nexus(tl_tpg);
+
+ if (tl_tpg->sas_rphy) {
+ sas_rphy_delete(tl_tpg->sas_rphy);
+ tl_tpg->sas_rphy = NULL;
+ }
+
+ if (tl_tpg->sas_port) {
+ sas_port_free(tl_tpg->sas_port);
+ tl_tpg->sas_port = NULL;
+ }
+
/*
* Deregister the tl_tpg as a emulated SAS TCM Target Endpoint
*/
@@ -1150,6 +1254,7 @@ static struct se_wwn *tcm_loop_make_scsi_hba(
ptr = strstr(name, "naa.");
if (ptr) {
tl_hba->tl_proto_id = SCSI_PROTOCOL_SAS;
+ off = 4; /* Skip over "naa." */
goto check_len;
}
ptr = strstr(name, "fc.");
diff --git a/drivers/target/loopback/tcm_loop.h
b/drivers/target/loopback/tcm_loop.h
index 4346462..2d4c22d 100644
--- a/drivers/target/loopback/tcm_loop.h
+++ b/drivers/target/loopback/tcm_loop.h
@@ -26,6 +26,7 @@ struct tcm_loop_nexus {
* Pointer to TCM session for I_T Nexus
*/
struct se_session *se_sess;
+ struct sas_phy *sas_phy;
};
#define TCM_TRANSPORT_ONLINE 0
@@ -39,6 +40,8 @@ struct tcm_loop_tpg {
struct se_portal_group tl_se_tpg;
struct tcm_loop_hba *tl_hba;
struct tcm_loop_nexus *tl_nexus;
+ struct sas_port *sas_port;
+ struct sas_rphy *sas_rphy;
};
struct tcm_loop_hba {
--
1.8.5.2
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
