Noted. Thanks for your review.
Don > -----Original Message----- > From: Tomas Henzl [mailto:the...@redhat.com] > Sent: Friday, March 27, 2015 10:11 AM > To: Don Brace; Scott Teel; Kevin Barnett; james.bottom...@parallels.com; > h...@infradead.org; Justin Lindley; brace > Cc: linux-scsi@vger.kernel.org > Subject: Re: [PATCH v3 03/42] hpsa: rework controller command submission > > On 03/17/2015 09:02 PM, Don Brace wrote: > > From: Webb Scales <webb.sca...@hp.com> > > > > Allow driver initiated commands to have a timeout. It does not > > yet try to do anything with timeouts on such commands. > > > > We are sending a reset in order to get rid of a command we want to abort. > > If we make it return on the same reply queue as the command we want to > abort, > > the completion of the aborted command will not race with the completion of > > the reset command. > > > > Rename hpsa_scsi_do_simple_cmd_core() to hpsa_scsi_do_simple_cmd(), > since > > this function is the interface for issuing commands to the controller and > > not the "core" of that implementation. Add a parameter to it which allows > > the caller to specify the reply queue to be used. Modify existing callers > > to specify the default reply queue. > > > > Rename __hpsa_scsi_do_simple_cmd_core() to > hpsa_scsi_do_simple_cmd_core(), > > since this routine is the "core" implementation of the "do simple command" > > function and there is no longer any other function with a similar name. > > Modify the existing callers of this routine (other than > > hpsa_scsi_do_simple_cmd()) to instead call hpsa_scsi_do_simple_cmd(), since > > it will now accept the reply_queue paramenter, and it provides a controller > > lock-up check. (Also, tweak two related message strings to make them > > distinct from each other.) > > > > Submitting a command to a locked up controller always results in a timeout, > > so check for controller lock-up before submitting. > > > > This is to enable fixing a race between command completions and > > abort completions on different reply queues in a subsequent patch. > > We want to be able to specify which reply queue an abort completion > > should occur on so that it cannot race the completion of the command > > it is trying to abort. > > > > The following race was possible in theory: > > > > 1. Abort command is sent to hardware. > > 2. Command to be aborted simultaneously completes on another > > reply queue. > > 3. Hardware receives abort command, decides command has already > > completed and indicates this to the driver via another different > > reply queue. > > 4. driver processes abort completion finds that the hardware does not know > > about the command, concludes that therefore the command cannot > complete, > > returns SUCCESS indicating to the mid-layer that the scsi_cmnd may be > > re-used. > > 5. Command from step 2 is processed and completed back to scsi mid > > layer (after we already promised that would never happen.) > > > > Fix by forcing aborts to complete on the same reply queue as the command > > they are aborting. > > > > Piggybacking device rescanning functionality onto the lockup > > detection thread is not a good idea because if the controller > > locks up during device rescanning, then the thread could get > > stuck, then the lockup isn't detected. Use separate work > > queues for device rescanning and lockup detection. > > > > Detect controller lockup in abort handler. > > > > After a lockup is detected, return DO_NO_CONNECT which results in > immediate > > termination of commands rather than DID_ERR which results in retries. > > > > Modify detect_controller_lockup() to return the result, to remove the need > > for > a separate check. > > > > Reviewed-by: Scott Teel <scott.t...@pmcs.com> > > Reviewed-by: Kevin Barnett <kevin.barn...@pmcs.com> > > Signed-off-by: Webb Scales <web...@hp.com> > > Signed-off-by: Don Brace <don.br...@pmcs.com> > > --- > > drivers/scsi/hpsa.c | 326 ++++++++++++++++++++++++++++++++++++------- > ---- > > drivers/scsi/hpsa_cmd.h | 5 + > > 2 files changed, 254 insertions(+), 77 deletions(-) > > > > diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c > > index 9b88726..488f81b 100644 > > --- a/drivers/scsi/hpsa.c > > +++ b/drivers/scsi/hpsa.c > > @@ -253,6 +253,8 @@ static int hpsa_scsi_ioaccel_queue_command(struct > ctlr_info *h, > > struct CommandList *c, u32 ioaccel_handle, u8 *cdb, int cdb_len, > > u8 *scsi3addr, struct hpsa_scsi_dev_t *phys_disk); > > static void hpsa_command_resubmit_worker(struct work_struct *work); > > +static u32 lockup_detected(struct ctlr_info *h); > > +static int detect_controller_lockup(struct ctlr_info *h); > > > > static inline struct ctlr_info *sdev_to_hba(struct scsi_device *sdev) > > { > > @@ -748,30 +750,43 @@ static inline u32 next_command(struct ctlr_info *h, > u8 q) > > * a separate special register for submitting commands. > > */ > > > > -/* set_performant_mode: Modify the tag for cciss performant > > +/* > > + * set_performant_mode: Modify the tag for cciss performant > > * set bit 0 for pull model, bits 3-1 for block fetch > > * register number > > */ > > -static void set_performant_mode(struct ctlr_info *h, struct CommandList *c) > > +#define DEFAULT_REPLY_QUEUE (-1) > > +static void set_performant_mode(struct ctlr_info *h, struct CommandList *c, > > + int reply_queue) > > { > > if (likely(h->transMethod & CFGTBL_Trans_Performant)) { > > c->busaddr |= 1 | (h->blockFetchTable[c->Header.SGList] << 1); > > - if (likely(h->msix_vector > 0)) > > + if (unlikely(!h->msix_vector)) > > + return; > > + if (likely(reply_queue == DEFAULT_REPLY_QUEUE)) > > c->Header.ReplyQueue = > > raw_smp_processor_id() % h->nreply_queues; > > + else > > + c->Header.ReplyQueue = reply_queue % h- > >nreply_queues; > > } > > } > > > > static void set_ioaccel1_performant_mode(struct ctlr_info *h, > > - struct CommandList *c) > > + struct CommandList *c, > > + int reply_queue) > > { > > struct io_accel1_cmd *cp = &h->ioaccel_cmd_pool[c->cmdindex]; > > > > - /* Tell the controller to post the reply to the queue for this > > + /* > > + * Tell the controller to post the reply to the queue for this > > * processor. This seems to give the best I/O throughput. > > */ > > - cp->ReplyQueue = smp_processor_id() % h->nreply_queues; > > - /* Set the bits in the address sent down to include: > > + if (likely(reply_queue == DEFAULT_REPLY_QUEUE)) > > + cp->ReplyQueue = smp_processor_id() % h->nreply_queues; > > + else > > + cp->ReplyQueue = reply_queue % h->nreply_queues; > > + /* > > + * Set the bits in the address sent down to include: > > * - performant mode bit (bit 0) > > * - pull count (bits 1-3) > > * - command type (bits 4-6) > > @@ -781,15 +796,21 @@ static void set_ioaccel1_performant_mode(struct > ctlr_info *h, > > } > > > > static void set_ioaccel2_performant_mode(struct ctlr_info *h, > > - struct CommandList *c) > > + struct CommandList *c, > > + int reply_queue) > > { > > struct io_accel2_cmd *cp = &h->ioaccel2_cmd_pool[c->cmdindex]; > > > > - /* Tell the controller to post the reply to the queue for this > > + /* > > + * Tell the controller to post the reply to the queue for this > > * processor. This seems to give the best I/O throughput. > > */ > > - cp->reply_queue = smp_processor_id() % h->nreply_queues; > > - /* Set the bits in the address sent down to include: > > + if (likely(reply_queue == DEFAULT_REPLY_QUEUE)) > > + cp->reply_queue = smp_processor_id() % h->nreply_queues; > > + else > > + cp->reply_queue = reply_queue % h->nreply_queues; > > + /* > > + * Set the bits in the address sent down to include: > > * - performant mode bit not used in ioaccel mode 2 > > * - pull count (bits 0-3) > > * - command type isn't needed for ioaccel2 > > @@ -826,26 +847,32 @@ static void > dial_up_lockup_detection_on_fw_flash_complete(struct ctlr_info *h, > > h->heartbeat_sample_interval = > HEARTBEAT_SAMPLE_INTERVAL; > > } > > > > -static void enqueue_cmd_and_start_io(struct ctlr_info *h, > > - struct CommandList *c) > > +static void __enqueue_cmd_and_start_io(struct ctlr_info *h, > > + struct CommandList *c, int reply_queue) > > { > > dial_down_lockup_detection_during_fw_flash(h, c); > > atomic_inc(&h->commands_outstanding); > > switch (c->cmd_type) { > > case CMD_IOACCEL1: > > - set_ioaccel1_performant_mode(h, c); > > + set_ioaccel1_performant_mode(h, c, reply_queue); > > writel(c->busaddr, h->vaddr + SA5_REQUEST_PORT_OFFSET); > > break; > > case CMD_IOACCEL2: > > - set_ioaccel2_performant_mode(h, c); > > + set_ioaccel2_performant_mode(h, c, reply_queue); > > writel(c->busaddr, h->vaddr + > IOACCEL2_INBOUND_POSTQ_32); > > break; > > default: > > - set_performant_mode(h, c); > > + set_performant_mode(h, c, reply_queue); > > h->access.submit_command(h, c); > > } > > } > > > > +static void enqueue_cmd_and_start_io(struct ctlr_info *h, > > + struct CommandList *c) > > +{ > > + __enqueue_cmd_and_start_io(h, c, DEFAULT_REPLY_QUEUE); > > +} > > + > > static inline int is_hba_lunid(unsigned char scsi3addr[]) > > { > > return memcmp(scsi3addr, RAID_CTLR_LUNID, 8) == 0; > > @@ -1877,6 +1904,19 @@ static void complete_scsi_command(struct > CommandList *cp) > > if (cp->cmd_type == CMD_IOACCEL2 || cp->cmd_type == > CMD_IOACCEL1) > > atomic_dec(&cp->phys_disk->ioaccel_cmds_out); > > > > + /* > > + * We check for lockup status here as it may be set for > > + * CMD_SCSI, CMD_IOACCEL1 and CMD_IOACCEL2 commands by > > + * fail_all_oustanding_cmds() > > + */ > > + if (unlikely(ei->CommandStatus == CMD_CTLR_LOCKUP)) { > > + /* DID_NO_CONNECT will prevent a retry */ > > + cmd->result = DID_NO_CONNECT << 16; > > + cmd_free(h, cp); > > + cmd->scsi_done(cmd); > > + return; > > + } > > + > > if (cp->cmd_type == CMD_IOACCEL2) > > return process_ioaccel2_completion(h, cp, cmd, dev); > > > > @@ -2091,14 +2131,36 @@ static int hpsa_map_one(struct pci_dev *pdev, > > return 0; > > } > > > > -static inline void hpsa_scsi_do_simple_cmd_core(struct ctlr_info *h, > > - struct CommandList *c) > > +#define NO_TIMEOUT ((unsigned long) -1) > > +#define DEFAULT_TIMEOUT 30000 /* milliseconds */ > > +static int hpsa_scsi_do_simple_cmd_core(struct ctlr_info *h, > > + struct CommandList *c, int reply_queue, unsigned long timeout_msecs) > > { > > DECLARE_COMPLETION_ONSTACK(wait); > > > > c->waiting = &wait; > > - enqueue_cmd_and_start_io(h, c); > > - wait_for_completion(&wait); > > + __enqueue_cmd_and_start_io(h, c, reply_queue); > > + if (timeout_msecs == NO_TIMEOUT) { > > + /* TODO: get rid of this no-timeout thing */ > > + wait_for_completion_io(&wait); > > + return IO_OK; > > + } > > + if (!wait_for_completion_io_timeout(&wait, > > + msecs_to_jiffies(timeout_msecs))) { > > + dev_warn(&h->pdev->dev, "Command timed out.\n"); > > + return -ETIMEDOUT; > > + } > > + return IO_OK; > > +} > > + > > +static int hpsa_scsi_do_simple_cmd(struct ctlr_info *h, struct CommandList > *c, > > + int reply_queue, unsigned long > timeout_msecs) > > +{ > > + if (unlikely(lockup_detected(h))) { > > + c->err_info->CommandStatus = CMD_CTLR_LOCKUP; > > + return IO_OK; > > + } > > + return hpsa_scsi_do_simple_cmd_core(h, c, reply_queue, > timeout_msecs); > > } > > > > static u32 lockup_detected(struct ctlr_info *h) > > @@ -2113,25 +2175,19 @@ static u32 lockup_detected(struct ctlr_info *h) > > return rc; > > } > > > > -static void hpsa_scsi_do_simple_cmd_core_if_no_lockup(struct ctlr_info *h, > > - struct CommandList *c) > > -{ > > - /* If controller lockup detected, fake a hardware error. */ > > - if (unlikely(lockup_detected(h))) > > - c->err_info->CommandStatus = CMD_HARDWARE_ERR; > > - else > > - hpsa_scsi_do_simple_cmd_core(h, c); > > -} > > - > > #define MAX_DRIVER_CMD_RETRIES 25 > > -static void hpsa_scsi_do_simple_cmd_with_retry(struct ctlr_info *h, > > - struct CommandList *c, int data_direction) > > +static int hpsa_scsi_do_simple_cmd_with_retry(struct ctlr_info *h, > > + struct CommandList *c, int data_direction, unsigned long > timeout_msecs) > > { > > int backoff_time = 10, retry_count = 0; > > + int rc; > > > > do { > > memset(c->err_info, 0, sizeof(*c->err_info)); > > - hpsa_scsi_do_simple_cmd_core(h, c); > > + rc = hpsa_scsi_do_simple_cmd(h, c, DEFAULT_REPLY_QUEUE, > > + timeout_msecs); > > + if (rc) > > + break; > > retry_count++; > > if (retry_count > 3) { > > msleep(backoff_time); > > @@ -2142,6 +2198,9 @@ static void > hpsa_scsi_do_simple_cmd_with_retry(struct ctlr_info *h, > > check_for_busy(h, c)) && > > retry_count <= MAX_DRIVER_CMD_RETRIES); > > hpsa_pci_unmap(h->pdev, c, 1, data_direction); > > + if (retry_count > MAX_DRIVER_CMD_RETRIES) > > + rc = -EIO; > > + return rc; > > } > > > > static void hpsa_print_cmd(struct ctlr_info *h, char *txt, > > @@ -2218,6 +2277,9 @@ static void hpsa_scsi_interpret_error(struct ctlr_info > *h, > > case CMD_UNABORTABLE: > > hpsa_print_cmd(h, "unabortable", cp); > > break; > > + case CMD_CTLR_LOCKUP: > > + hpsa_print_cmd(h, "controller lockup detected", cp); > > + break; > > default: > > hpsa_print_cmd(h, "unknown status", cp); > > dev_warn(d, "Unknown command status %x\n", > > @@ -2245,7 +2307,10 @@ static int hpsa_scsi_do_inquiry(struct ctlr_info *h, > unsigned char *scsi3addr, > > rc = -1; > > goto out; > > } > > - hpsa_scsi_do_simple_cmd_with_retry(h, c, PCI_DMA_FROMDEVICE); > > + rc = hpsa_scsi_do_simple_cmd_with_retry(h, c, > > + PCI_DMA_FROMDEVICE, NO_TIMEOUT); > > + if (rc) > > + goto out; > > ei = c->err_info; > > if (ei->CommandStatus != 0 && ei->CommandStatus != > CMD_DATA_UNDERRUN) { > > hpsa_scsi_interpret_error(h, c); > > @@ -2275,7 +2340,10 @@ static int hpsa_bmic_ctrl_mode_sense(struct > ctlr_info *h, > > rc = -1; > > goto out; > > } > > - hpsa_scsi_do_simple_cmd_with_retry(h, c, PCI_DMA_FROMDEVICE); > > + rc = hpsa_scsi_do_simple_cmd_with_retry(h, c, > > + PCI_DMA_FROMDEVICE, > NO_TIMEOUT); > > + if (rc) > > + goto out; > > ei = c->err_info; > > if (ei->CommandStatus != 0 && ei->CommandStatus != > CMD_DATA_UNDERRUN) { > > hpsa_scsi_interpret_error(h, c); > > @@ -2287,7 +2355,7 @@ out: > > } > > > > static int hpsa_send_reset(struct ctlr_info *h, unsigned char *scsi3addr, > > - u8 reset_type) > > + u8 reset_type, int reply_queue) > > { > > int rc = IO_OK; > > struct CommandList *c; > > @@ -2304,7 +2372,11 @@ static int hpsa_send_reset(struct ctlr_info *h, > unsigned char *scsi3addr, > > (void) fill_cmd(c, HPSA_DEVICE_RESET_MSG, h, NULL, 0, 0, > > scsi3addr, TYPE_MSG); > > c->Request.CDB[1] = reset_type; /* fill_cmd defaults to LUN reset */ > > - hpsa_scsi_do_simple_cmd_core(h, c); > > + rc = hpsa_scsi_do_simple_cmd(h, c, reply_queue, NO_TIMEOUT); > > + if (rc) { > > + dev_warn(&h->pdev->dev, "Failed to send reset command\n"); > > + goto out; > > + } > > /* no unmap needed here because no data xfer. */ > > > > ei = c->err_info; > > @@ -2312,6 +2384,7 @@ static int hpsa_send_reset(struct ctlr_info *h, > unsigned char *scsi3addr, > > hpsa_scsi_interpret_error(h, c); > > rc = -1; > > } > > +out: > > cmd_free(h, c); > > return rc; > > } > > @@ -2429,15 +2502,18 @@ static int hpsa_get_raid_map(struct ctlr_info *h, > > sizeof(this_device->raid_map), 0, > > scsi3addr, TYPE_CMD)) { > > dev_warn(&h->pdev->dev, "Out of memory in > hpsa_get_raid_map()\n"); > > - cmd_free(h, c); > > - return -ENOMEM; > > + rc = -ENOMEM; > > + goto out; > > } > > - hpsa_scsi_do_simple_cmd_with_retry(h, c, PCI_DMA_FROMDEVICE); > > + rc = hpsa_scsi_do_simple_cmd_with_retry(h, c, > > + PCI_DMA_FROMDEVICE, > NO_TIMEOUT); > > + if (rc) > > + goto out; > > ei = c->err_info; > > if (ei->CommandStatus != 0 && ei->CommandStatus != > CMD_DATA_UNDERRUN) { > > hpsa_scsi_interpret_error(h, c); > > - cmd_free(h, c); > > - return -1; > > + rc = -1; > > + goto out; > > } > > cmd_free(h, c); > > > > @@ -2449,6 +2525,9 @@ static int hpsa_get_raid_map(struct ctlr_info *h, > > } > > hpsa_debug_map_buff(h, rc, &this_device->raid_map); > > return rc; > > +out: > > + cmd_free(h, c); > > + return rc; > > } > > > > static int hpsa_bmic_id_physical_device(struct ctlr_info *h, > > @@ -2468,7 +2547,8 @@ static int hpsa_bmic_id_physical_device(struct > ctlr_info *h, > > c->Request.CDB[2] = bmic_device_index & 0xff; > > c->Request.CDB[9] = (bmic_device_index >> 8) & 0xff; > > > > - hpsa_scsi_do_simple_cmd_with_retry(h, c, PCI_DMA_FROMDEVICE); > > + hpsa_scsi_do_simple_cmd_with_retry(h, c, PCI_DMA_FROMDEVICE, > > + NO_TIMEOUT); > > ei = c->err_info; > > if (ei->CommandStatus != 0 && ei->CommandStatus != > CMD_DATA_UNDERRUN) { > > hpsa_scsi_interpret_error(h, c); > > @@ -2603,7 +2683,10 @@ static int hpsa_scsi_do_report_luns(struct ctlr_info > *h, int logical, > > } > > if (extended_response) > > c->Request.CDB[1] = extended_response; > > - hpsa_scsi_do_simple_cmd_with_retry(h, c, PCI_DMA_FROMDEVICE); > > + rc = hpsa_scsi_do_simple_cmd_with_retry(h, c, > > + PCI_DMA_FROMDEVICE, > NO_TIMEOUT); > > + if (rc) > > + goto out; > > ei = c->err_info; > > if (ei->CommandStatus != 0 && > > ei->CommandStatus != CMD_DATA_UNDERRUN) { > > @@ -2696,7 +2779,7 @@ static int hpsa_volume_offline(struct ctlr_info *h, > > { > > struct CommandList *c; > > unsigned char *sense, sense_key, asc, ascq; > > - int ldstat = 0; > > + int rc, ldstat = 0; > > u16 cmd_status; > > u8 scsi_status; > > #define ASC_LUN_NOT_READY 0x04 > > @@ -2707,7 +2790,11 @@ static int hpsa_volume_offline(struct ctlr_info *h, > > if (!c) > > return 0; > > (void) fill_cmd(c, TEST_UNIT_READY, h, NULL, 0, 0, scsi3addr, > TYPE_CMD); > > - hpsa_scsi_do_simple_cmd_core(h, c); > > + rc = hpsa_scsi_do_simple_cmd(h, c, DEFAULT_REPLY_QUEUE, > NO_TIMEOUT); > > + if (rc) { > > + cmd_free(h, c); > > + return 0; > > + } > > sense = c->err_info->SenseInfo; > > sense_key = sense[2]; > > asc = sense[12]; > > @@ -4040,7 +4127,11 @@ static int hpsa_scsi_ioaccel_raid_map(struct > ctlr_info *h, > > dev->phys_disk[map_index]); > > } > > > > -/* Submit commands down the "normal" RAID stack path */ > > +/* > > + * Submit commands down the "normal" RAID stack path > > + * All callers to hpsa_ciss_submit must check lockup_detected > > + * beforehand, before (opt.) and after calling cmd_alloc > > + */ > > static int hpsa_ciss_submit(struct ctlr_info *h, > > struct CommandList *c, struct scsi_cmnd *cmd, > > unsigned char scsi3addr[]) > > @@ -4151,7 +4242,7 @@ static int hpsa_scsi_queue_command(struct > Scsi_Host *sh, struct scsi_cmnd *cmd) > > memcpy(scsi3addr, dev->scsi3addr, sizeof(scsi3addr)); > > > > if (unlikely(lockup_detected(h))) { > > - cmd->result = DID_ERROR << 16; > > + cmd->result = DID_NO_CONNECT << 16; > > cmd->scsi_done(cmd); > > return 0; > > } > > @@ -4161,7 +4252,7 @@ static int hpsa_scsi_queue_command(struct > Scsi_Host *sh, struct scsi_cmnd *cmd) > > return SCSI_MLQUEUE_HOST_BUSY; > > } > > if (unlikely(lockup_detected(h))) { > > - cmd->result = DID_ERROR << 16; > > + cmd->result = DID_NO_CONNECT << 16; > > cmd_free(h, c); > > cmd->scsi_done(cmd); > > return 0; > > @@ -4356,7 +4447,10 @@ static int > wait_for_device_to_become_ready(struct ctlr_info *h, > > /* Send the Test Unit Ready, fill_cmd can't fail, no mapping */ > > (void) fill_cmd(c, TEST_UNIT_READY, h, > > NULL, 0, 0, lunaddr, TYPE_CMD); > > - hpsa_scsi_do_simple_cmd_core(h, c); > > + rc = hpsa_scsi_do_simple_cmd(h, c, DEFAULT_REPLY_QUEUE, > > + NO_TIMEOUT); > > + if (rc) > > + goto do_it_again; > > /* no unmap needed here because no data xfer. */ > > > > if (c->err_info->CommandStatus == CMD_SUCCESS) > > @@ -4367,7 +4461,7 @@ static int wait_for_device_to_become_ready(struct > ctlr_info *h, > > (c->err_info->SenseInfo[2] == NO_SENSE || > > c->err_info->SenseInfo[2] == UNIT_ATTENTION)) > > break; > > - > > +do_it_again: > > dev_warn(&h->pdev->dev, "waiting %d secs " > > "for device to become ready.\n", waittime); > > rc = 1; /* device not ready. */ > > @@ -4405,13 +4499,46 @@ static int hpsa_eh_device_reset_handler(struct > scsi_cmnd *scsicmd) > > "device lookup failed.\n"); > > return FAILED; > > } > > - dev_warn(&h->pdev->dev, "resetting device %d:%d:%d:%d\n", > > - h->scsi_host->host_no, dev->bus, dev->target, dev->lun); > > + > > + /* if controller locked up, we can guarantee command won't complete > */ > > + if (lockup_detected(h)) { > > + dev_warn(&h->pdev->dev, > > + "scsi %d:%d:%d:%d RESET FAILED, lockup detected\n", > > + h->scsi_host->host_no, dev->bus, dev->target, > > + dev->lun); > > + return FAILED; > > + } > > + > > + /* this reset request might be the result of a lockup; check */ > > + if (detect_controller_lockup(h)) { > > + dev_warn(&h->pdev->dev, > > + "scsi %d:%d:%d:%d RESET FAILED, new lockup > detected\n", > > + h->scsi_host->host_no, dev->bus, dev->target, > > + dev->lun); > > + return FAILED; > > + } > > + > > + dev_warn(&h->pdev->dev, > > + "scsi %d:%d:%d:%d: %s %.8s %.16s resetting RAID-%s > SSDSmartPathCap%c En%c Exp=%d\n", > > + h->scsi_host->host_no, dev->bus, dev->target, dev->lun, > > + scsi_device_type(dev->devtype), > > + dev->vendor, > > + dev->model, > > + dev->raid_level > RAID_UNKNOWN ? > > + "RAID-?" : raid_label[dev->raid_level], > > + dev->offload_config ? '+' : '-', > > + dev->offload_enabled ? '+' : '-', > > + dev->expose_state); > > + > > /* send a reset to the SCSI LUN which the command was sent to */ > > - rc = hpsa_send_reset(h, dev->scsi3addr, HPSA_RESET_TYPE_LUN); > > + rc = hpsa_send_reset(h, dev->scsi3addr, HPSA_RESET_TYPE_LUN, > > + DEFAULT_REPLY_QUEUE); > > if (rc == 0 && wait_for_device_to_become_ready(h, dev->scsi3addr) == > 0) > > return SUCCESS; > > > > + dev_warn(&h->pdev->dev, > > + "scsi %d:%d:%d:%d reset failed\n", > > + h->scsi_host->host_no, dev->bus, dev->target, dev->lun); > > return FAILED; > > } > > > > @@ -4456,7 +4583,7 @@ static void hpsa_get_tag(struct ctlr_info *h, > > } > > > > static int hpsa_send_abort(struct ctlr_info *h, unsigned char *scsi3addr, > > - struct CommandList *abort, int swizzle) > > + struct CommandList *abort, int swizzle, int reply_queue) > > { > > int rc = IO_OK; > > struct CommandList *c; > > @@ -4474,9 +4601,9 @@ static int hpsa_send_abort(struct ctlr_info *h, > unsigned char *scsi3addr, > > 0, 0, scsi3addr, TYPE_MSG); > > if (swizzle) > > swizzle_abort_tag(&c->Request.CDB[4]); > > - hpsa_scsi_do_simple_cmd_core(h, c); > > + (void) hpsa_scsi_do_simple_cmd(h, c, reply_queue, NO_TIMEOUT); > > hpsa_get_tag(h, abort, &taglower, &tagupper); > > - dev_dbg(&h->pdev->dev, "%s: Tag:0x%08x:%08x: do_simple_cmd_core > completed.\n", > > + dev_dbg(&h->pdev->dev, "%s: Tag:0x%08x:%08x: > do_simple_cmd(abort) completed.\n", > > __func__, tagupper, taglower); > > /* no unmap needed here because no data xfer. */ > > > > @@ -4508,7 +4635,7 @@ static int hpsa_send_abort(struct ctlr_info *h, > unsigned char *scsi3addr, > > */ > > > > static int hpsa_send_reset_as_abort_ioaccel2(struct ctlr_info *h, > > - unsigned char *scsi3addr, struct CommandList *abort) > > + unsigned char *scsi3addr, struct CommandList *abort, int reply_queue) > > { > > int rc = IO_OK; > > struct scsi_cmnd *scmd; /* scsi command within request being aborted > */ > > @@ -4551,7 +4678,7 @@ static int > hpsa_send_reset_as_abort_ioaccel2(struct ctlr_info *h, > > "Reset as abort: Resetting physical device at scsi3addr > 0x%02x%02x%02x%02x%02x%02x%02x%02x\n", > > psa[0], psa[1], psa[2], psa[3], > > psa[4], psa[5], psa[6], psa[7]); > > - rc = hpsa_send_reset(h, psa, HPSA_RESET_TYPE_TARGET); > > + rc = hpsa_send_reset(h, psa, HPSA_RESET_TYPE_TARGET, reply_queue); > > if (rc != 0) { > > dev_warn(&h->pdev->dev, > > "Reset as abort: Failed on physical device at scsi3addr > 0x%02x%02x%02x%02x%02x%02x%02x%02x\n", > > @@ -4585,7 +4712,7 @@ static int > hpsa_send_reset_as_abort_ioaccel2(struct ctlr_info *h, > > * make this true someday become false. > > */ > > static int hpsa_send_abort_both_ways(struct ctlr_info *h, > > - unsigned char *scsi3addr, struct CommandList *abort) > > + unsigned char *scsi3addr, struct CommandList *abort, int reply_queue) > > { > > /* ioccelerator mode 2 commands should be aborted via the > > * accelerated path, since RAID path is unaware of these commands, > > @@ -4593,10 +4720,20 @@ static int hpsa_send_abort_both_ways(struct > ctlr_info *h, > > * Change abort to physical device reset. > > */ > > if (abort->cmd_type == CMD_IOACCEL2) > > - return hpsa_send_reset_as_abort_ioaccel2(h, scsi3addr, abort); > > + return hpsa_send_reset_as_abort_ioaccel2(h, scsi3addr, > > + abort, reply_queue); > > + > > + return hpsa_send_abort(h, scsi3addr, abort, 0, reply_queue) && > > + hpsa_send_abort(h, scsi3addr, abort, 1, reply_queue); > > +} > > > > - return hpsa_send_abort(h, scsi3addr, abort, 0) && > > - hpsa_send_abort(h, scsi3addr, abort, 1); > > +/* Find out which reply queue a command was meant to return on */ > > +static int hpsa_extract_reply_queue(struct ctlr_info *h, > > + struct CommandList *c) > > +{ > > + if (c->cmd_type == CMD_IOACCEL2) > > + return h->ioaccel2_cmd_pool[c->cmdindex].reply_queue; > > + return c->Header.ReplyQueue; > > } > > > > /* Send an abort for the specified command. > > @@ -4614,7 +4751,7 @@ static int hpsa_eh_abort_handler(struct scsi_cmnd > *sc) > > char msg[256]; /* For debug messaging. */ > > int ml = 0; > > __le32 tagupper, taglower; > > - int refcount; > > + int refcount, reply_queue; > > > > /* Find the controller of the command to be aborted */ > > h = sdev_to_hba(sc->device); > > @@ -4622,8 +4759,23 @@ static int hpsa_eh_abort_handler(struct scsi_cmnd > *sc) > > "ABORT REQUEST FAILED, Controller lookup failed.\n")) > > return FAILED; > > > > - if (lockup_detected(h)) > > + /* If controller locked up, we can guarantee command won't complete > */ > > + if (lockup_detected(h)) { > > + dev_warn(&h->pdev->dev, > > + "scsi %d:%d:%d:%llu scmd %p ABORT FAILED, lockup > detected\n", > > + h->scsi_host->host_no, sc->device->channel, > > + sc->device->id, sc->device->lun, sc); > > return FAILED; > > + } > > + > > + /* This is a good time to check if controller lockup has occurred */ > > + if (detect_controller_lockup(h)) { > > + dev_warn(&h->pdev->dev, > > + "scsi %d:%d:%d:%llu scmd %p ABORT FAILED, new > lockup detected\n", > > + h->scsi_host->host_no, sc->device->channel, > > + sc->device->id, sc->device->lun, sc); > > + return FAILED; > > + } > > > > /* Check that controller supports some kind of task abort */ > > if (!(HPSATMF_PHYS_TASK_ABORT & h->TMFSupportFlags) && > > @@ -4656,6 +4808,7 @@ static int hpsa_eh_abort_handler(struct scsi_cmnd > *sc) > > return SUCCESS; > > } > > hpsa_get_tag(h, abort, &taglower, &tagupper); > > + reply_queue = hpsa_extract_reply_queue(h, abort); > > ml += sprintf(msg+ml, "Tag:0x%08x:%08x ", tagupper, taglower); > > as = abort->scsi_cmd; > > if (as != NULL) > > @@ -4670,7 +4823,7 @@ static int hpsa_eh_abort_handler(struct scsi_cmnd > *sc) > > * by the firmware (but not to the scsi mid layer) but we can't > > * distinguish which. Send the abort down. > > */ > > - rc = hpsa_send_abort_both_ways(h, dev->scsi3addr, abort); > > + rc = hpsa_send_abort_both_ways(h, dev->scsi3addr, abort, > reply_queue); > > if (rc != 0) { > > dev_warn(&h->pdev->dev, "scsi %d:%d:%d:%d %s\n", > > h->scsi_host->host_no, > > @@ -4995,7 +5148,9 @@ static int hpsa_passthru_ioctl(struct ctlr_info *h, > void __user *argp) > > c->SG[0].Len = cpu_to_le32(iocommand.buf_size); > > c->SG[0].Ext = cpu_to_le32(HPSA_SG_LAST); /* not chaining */ > > } > > - hpsa_scsi_do_simple_cmd_core_if_no_lockup(h, c); > > + rc = hpsa_scsi_do_simple_cmd(h, c, DEFAULT_REPLY_QUEUE, > NO_TIMEOUT); > > + if (rc) > > + rc = -EIO; > > We just pretend here that an error path exist, with NO_TIMEOUT the function > can't fail, > but if it could we might end up copying some random data from kernel to user > space. > > > if (iocommand.buf_size > 0) > > hpsa_pci_unmap(h->pdev, c, 1, PCI_DMA_BIDIRECTIONAL); > > check_ioctl_unit_attention(h, c); > > @@ -5125,7 +5280,11 @@ static int hpsa_big_passthru_ioctl(struct ctlr_info > *h, void __user *argp) > > } > > c->SG[--i].Ext = cpu_to_le32(HPSA_SG_LAST); > > } > > - hpsa_scsi_do_simple_cmd_core_if_no_lockup(h, c); > > + status = hpsa_scsi_do_simple_cmd(h, c, DEFAULT_REPLY_QUEUE, > NO_TIMEOUT); > > + if (status) { > > + status = -EIO; > > + goto cleanup0; > > Similar here, by goto cleanup0; we miss a call to hpsa_pci_unmap. > Nothing from that is an issue because hpsa_scsi_do_simple_cmd(h, c, > DEFAULT_REPLY_QUEUE, NO_TIMEOUT) > can't fail, but it is a prepared trap for a future change with a real > timeout. > > As it is now it is not a real issue, when it's fixed in next driver update > it's fine > for me. > > Tomas > > > + } > > if (sg_used) > > hpsa_pci_unmap(h->pdev, c, sg_used, > PCI_DMA_BIDIRECTIONAL); > > check_ioctl_unit_attention(h, c); > > @@ -6272,6 +6431,8 @@ static int hpsa_wait_for_mode_change_ack(struct > ctlr_info *h) > > * as we enter this code.) > > */ > > for (i = 0; i < MAX_MODE_CHANGE_WAIT; i++) { > > + if (h->remove_in_progress) > > + goto done; > > spin_lock_irqsave(&h->lock, flags); > > doorbell_value = readl(h->vaddr + SA5_DOORBELL); > > spin_unlock_irqrestore(&h->lock, flags); > > @@ -6667,17 +6828,21 @@ static void fail_all_outstanding_cmds(struct > ctlr_info *h) > > { > > int i, refcount; > > struct CommandList *c; > > + int failcount = 0; > > > > flush_workqueue(h->resubmit_wq); /* ensure all cmds are fully built */ > > for (i = 0; i < h->nr_cmds; i++) { > > c = h->cmd_pool + i; > > refcount = atomic_inc_return(&c->refcount); > > if (refcount > 1) { > > - c->err_info->CommandStatus = > CMD_HARDWARE_ERR; > > + c->err_info->CommandStatus = CMD_CTLR_LOCKUP; > > finish_cmd(c); > > + failcount++; > > } > > cmd_free(h, c); > > } > > + dev_warn(&h->pdev->dev, > > + "failed %d commands in fail_all\n", failcount); > > } > > > > static void set_lockup_detected_for_all_cpus(struct ctlr_info *h, u32 > > value) > > @@ -6705,18 +6870,19 @@ static void controller_lockup_detected(struct > ctlr_info *h) > > if (!lockup_detected) { > > /* no heartbeat, but controller gave us a zero. */ > > dev_warn(&h->pdev->dev, > > - "lockup detected but scratchpad register is zero\n"); > > + "lockup detected after %d but scratchpad register is > zero\n", > > + h->heartbeat_sample_interval / HZ); > > lockup_detected = 0xffffffff; > > } > > set_lockup_detected_for_all_cpus(h, lockup_detected); > > spin_unlock_irqrestore(&h->lock, flags); > > - dev_warn(&h->pdev->dev, "Controller lockup detected: 0x%08x\n", > > - lockup_detected); > > + dev_warn(&h->pdev->dev, "Controller lockup detected: 0x%08x after > %d\n", > > + lockup_detected, h->heartbeat_sample_interval / HZ); > > pci_disable_device(h->pdev); > > fail_all_outstanding_cmds(h); > > } > > > > -static void detect_controller_lockup(struct ctlr_info *h) > > +static int detect_controller_lockup(struct ctlr_info *h) > > { > > u64 now; > > u32 heartbeat; > > @@ -6726,7 +6892,7 @@ static void detect_controller_lockup(struct ctlr_info > *h) > > /* If we've received an interrupt recently, we're ok. */ > > if (time_after64(h->last_intr_timestamp + > > (h->heartbeat_sample_interval), now)) > > - return; > > + return false; > > > > /* > > * If we've already checked the heartbeat recently, we're ok. > > @@ -6735,7 +6901,7 @@ static void detect_controller_lockup(struct ctlr_info > *h) > > */ > > if (time_after64(h->last_heartbeat_timestamp + > > (h->heartbeat_sample_interval), now)) > > - return; > > + return false; > > > > /* If heartbeat has not changed since we last looked, we're not ok. */ > > spin_lock_irqsave(&h->lock, flags); > > @@ -6743,12 +6909,13 @@ static void detect_controller_lockup(struct > ctlr_info *h) > > spin_unlock_irqrestore(&h->lock, flags); > > if (h->last_heartbeat == heartbeat) { > > controller_lockup_detected(h); > > - return; > > + return true; > > } > > > > /* We're ok. */ > > h->last_heartbeat = heartbeat; > > h->last_heartbeat_timestamp = now; > > + return false; > > } > > > > static void hpsa_ack_ctlr_events(struct ctlr_info *h) > > @@ -7092,8 +7259,10 @@ static void hpsa_flush_cache(struct ctlr_info *h) > > { > > char *flush_buf; > > struct CommandList *c; > > + int rc; > > > > /* Don't bother trying to flush the cache if locked up */ > > + /* FIXME not necessary if do_simple_cmd does the check */ > > if (unlikely(lockup_detected(h))) > > return; > > flush_buf = kzalloc(4, GFP_KERNEL); > > @@ -7109,7 +7278,10 @@ static void hpsa_flush_cache(struct ctlr_info *h) > > RAID_CTLR_LUNID, TYPE_CMD)) { > > goto out; > > } > > - hpsa_scsi_do_simple_cmd_with_retry(h, c, PCI_DMA_TODEVICE); > > + rc = hpsa_scsi_do_simple_cmd_with_retry(h, c, > > + PCI_DMA_TODEVICE, NO_TIMEOUT); > > + if (rc) > > + goto out; > > if (c->err_info->CommandStatus != 0) > > out: > > dev_warn(&h->pdev->dev, > > diff --git a/drivers/scsi/hpsa_cmd.h b/drivers/scsi/hpsa_cmd.h > > index 76d5499..f52c847 100644 > > --- a/drivers/scsi/hpsa_cmd.h > > +++ b/drivers/scsi/hpsa_cmd.h > > @@ -43,6 +43,11 @@ > > #define CMD_TIMEOUT 0x000B > > #define CMD_UNABORTABLE 0x000C > > #define CMD_IOACCEL_DISABLED 0x000E > > +#define CMD_CTLR_LOCKUP 0xffff > > +/* Note: CMD_CTLR_LOCKUP is not a value defined by the CISS spec > > + * it is a value defined by the driver that commands can be marked > > + * with when a controller lockup has been detected by the driver > > + */ > > > > > > /* Unit Attentions ASC's as defined for the MSA2012sa */ > > > > -- > > To unsubscribe from this list: send the line "unsubscribe linux-scsi" in > > the body of a message to majord...@vger.kernel.org > > More majordomo info at http://vger.kernel.org/majordomo-info.html
