On 02/03/2015 06:28 PM, micha...@cs.wisc.edu wrote:
> From: Mike Christie <micha...@cs.wisc.edu>
>
> iBFT and non-iBFT drivers use the same iscsi boot sysfs
> interface. For iBFT we just directly export whatever
> is left by the FW. For non-iBFT drivers we do vendor
> specific commands to get the info or its just hard coded.
>
> This patch syncs up how non-iBFT drivers export boot flag
> info. The boot flags being defined in this patch match
> the iBFT flags that indicate if the boot info found was
> valid and if it was used for to boot with.
>
> Signed-off-by: Mike Christie <micha...@cs.wisc.edu>
> ---
> drivers/scsi/be2iscsi/be_main.c | 8 +++++---
> drivers/scsi/qla4xxx/ql4_def.h | 1 -
> drivers/scsi/qla4xxx/ql4_os.c | 6 ++++--
> include/linux/iscsi_boot_sysfs.h | 3 +++
> 4 files changed, 12 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/scsi/be2iscsi/be_main.c b/drivers/scsi/be2iscsi/be_main.c
> index f319340..cd4aff9 100644
> --- a/drivers/scsi/be2iscsi/be_main.c
> +++ b/drivers/scsi/be2iscsi/be_main.c
> @@ -429,7 +429,8 @@ static ssize_t beiscsi_show_boot_tgt_info(void *data, int
> type, char *buf)
> auth_data.chap.intr_secret);
> break;
> case ISCSI_BOOT_TGT_FLAGS:
> - rc = sprintf(str, "2\n");
> + rc = sprintf(str, "%u\n",
> + ISCSI_BOOT_FLAG_VALID |
> ISCSI_BOOT_FLAG_FW_BOOT_SEL);
> break;
> case ISCSI_BOOT_TGT_NIC_ASSOC:
> rc = sprintf(str, "0\n");
> @@ -466,8 +467,9 @@ static ssize_t beiscsi_show_boot_eth_info(void *data, int
> type, char *buf)
>
> switch (type) {
> case ISCSI_BOOT_ETH_FLAGS:
> - rc = sprintf(str, "2\n");
> - break;
> + rc = sprintf(str, "%u\n",
> + ISCSI_BOOT_FLAG_VALID |
> ISCSI_BOOT_FLAG_FW_BOOT_SEL);
> + break;
> case ISCSI_BOOT_ETH_INDEX:
> rc = sprintf(str, "0\n");
> break;
> diff --git a/drivers/scsi/qla4xxx/ql4_def.h b/drivers/scsi/qla4xxx/ql4_def.h
> index 8f6d0fb..0380669 100644
> --- a/drivers/scsi/qla4xxx/ql4_def.h
> +++ b/drivers/scsi/qla4xxx/ql4_def.h
> @@ -796,7 +796,6 @@ struct scsi_qla_host {
> #define CHAP_DMA_BLOCK_SIZE 512
> struct workqueue_struct *task_wq;
> unsigned long ddb_idx_map[MAX_DDB_ENTRIES / BITS_PER_LONG];
> -#define SYSFS_FLAG_FW_SEL_BOOT 2
> struct iscsi_boot_kset *boot_kset;
> struct ql4_boot_tgt_info boot_tgt;
> uint16_t phy_port_num;
> diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c
> index 6d25879..b63985f 100644
> --- a/drivers/scsi/qla4xxx/ql4_os.c
> +++ b/drivers/scsi/qla4xxx/ql4_os.c
> @@ -5705,7 +5705,8 @@ static ssize_t qla4xxx_show_boot_eth_info(void *data,
> int type, char *buf)
>
> switch (type) {
> case ISCSI_BOOT_ETH_FLAGS:
> - rc = sprintf(str, "%d\n", SYSFS_FLAG_FW_SEL_BOOT);
> + rc = sprintf(str, "%d\n",
> + ISCSI_BOOT_FLAG_VALID |
> ISCSI_BOOT_FLAG_FW_BOOT_SEL);
> break;
> case ISCSI_BOOT_ETH_INDEX:
> rc = sprintf(str, "0\n");
> @@ -5814,7 +5815,8 @@ qla4xxx_show_boot_tgt_info(struct ql4_boot_session_info
> *boot_sess, int type,
> (char *)&boot_conn->chap.intr_secret);
> break;
> case ISCSI_BOOT_TGT_FLAGS:
> - rc = sprintf(str, "%d\n", SYSFS_FLAG_FW_SEL_BOOT);
> + rc = sprintf(str, "%d\n",
> + ISCSI_BOOT_FLAG_VALID |
> ISCSI_BOOT_FLAG_FW_BOOT_SEL);
> break;
> case ISCSI_BOOT_TGT_NIC_ASSOC:
> rc = sprintf(str, "0\n");
> diff --git a/include/linux/iscsi_boot_sysfs.h
> b/include/linux/iscsi_boot_sysfs.h
> index 2a8b165..3f273d6 100644
> --- a/include/linux/iscsi_boot_sysfs.h
> +++ b/include/linux/iscsi_boot_sysfs.h
> @@ -16,6 +16,9 @@
> #ifndef _ISCSI_BOOT_SYSFS_
> #define _ISCSI_BOOT_SYSFS_
>
> +#define ISCSI_BOOT_FLAG_VALID 0x1
> +#define ISCSI_BOOT_FLAG_FW_BOOT_SEL 0x2
> +
> /*
> * The text attributes names for each of the kobjects.
> */
>
Reviewed-by: Lee Duncan <ldun...@suse.com>
--
Lee Duncan
SUSE Labs
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
