On Wed, 3 Dec 2014, Rasmus Villemoes wrote:
> The macro SPRINTF doesn't save a lot of typing or make the code more
> readable, and depending on a specific identifier (m) in the
> surrounding scope is generally frowned upon. Nuke it.
Yes. I was going to eliminate this macro from NCR5380.c too, for
consistency with atari_NCR5380.
Reviewed-by: Finn Thain <fth...@telegraphics.com.au>
For the NCR5380 bits:
Acked-by: Finn Thain <fth...@telegraphics.com.au>
>
> Signed-off-by: Rasmus Villemoes <li...@rasmusvillemoes.dk>
> ---
> drivers/scsi/NCR5380.c | 20 ++-
> drivers/scsi/aha152x.c | 295
> +++++++++++++++++++++----------------------
> drivers/scsi/dc395x.c | 78 ++++++------
> drivers/scsi/nsp32.c | 41 +++---
> drivers/scsi/pcmcia/nsp_cs.c | 50 ++++----
> drivers/scsi/wd7000.c | 41 +++---
> 6 files changed, 252 insertions(+), 273 deletions(-)
>
> diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c
> index 36244d6..aca181e 100644
> --- a/drivers/scsi/NCR5380.c
> +++ b/drivers/scsi/NCR5380.c
> @@ -716,8 +716,6 @@ static int __maybe_unused NCR5380_write_info(struct
> Scsi_Host *instance,
> }
> #endif
>
> -#undef SPRINTF
> -#define SPRINTF(args...) seq_printf(m, ## args)
> static
> void lprint_Scsi_Cmnd(struct scsi_cmnd *cmd, struct seq_file *m);
> static
> @@ -734,19 +732,19 @@ static int __maybe_unused NCR5380_show_info(struct
> seq_file *m,
> hostdata = (struct NCR5380_hostdata *) instance->hostdata;
>
> #ifdef PSEUDO_DMA
> - SPRINTF("Highwater I/O busy spin counts: write %d, read %d\n",
> + seq_printf(m, "Highwater I/O busy spin counts: write %d, read %d\n",
> hostdata->spin_max_w, hostdata->spin_max_r);
> #endif
> spin_lock_irq(instance->host_lock);
> if (!hostdata->connected)
> - SPRINTF("scsi%d: no currently connected command\n",
> instance->host_no);
> + seq_printf(m, "scsi%d: no currently connected command\n",
> instance->host_no);
> else
> lprint_Scsi_Cmnd((struct scsi_cmnd *) hostdata->connected, m);
> - SPRINTF("scsi%d: issue_queue\n", instance->host_no);
> + seq_printf(m, "scsi%d: issue_queue\n", instance->host_no);
> for (ptr = (struct scsi_cmnd *) hostdata->issue_queue; ptr; ptr =
> (struct scsi_cmnd *) ptr->host_scribble)
> lprint_Scsi_Cmnd(ptr, m);
>
> - SPRINTF("scsi%d: disconnected_queue\n", instance->host_no);
> + seq_printf(m, "scsi%d: disconnected_queue\n", instance->host_no);
> for (ptr = (struct scsi_cmnd *) hostdata->disconnected_queue; ptr; ptr
> = (struct scsi_cmnd *) ptr->host_scribble)
> lprint_Scsi_Cmnd(ptr, m);
> spin_unlock_irq(instance->host_lock);
> @@ -755,8 +753,8 @@ static int __maybe_unused NCR5380_show_info(struct
> seq_file *m,
>
> static void lprint_Scsi_Cmnd(struct scsi_cmnd *cmd, struct seq_file *m)
> {
> - SPRINTF("scsi%d : destination target %d, lun %llu\n",
> cmd->device->host->host_no, cmd->device->id, cmd->device->lun);
> - SPRINTF(" command = ");
> + seq_printf(m, "scsi%d : destination target %d, lun %llu\n",
> cmd->device->host->host_no, cmd->device->id, cmd->device->lun);
> + seq_printf(m, " command = ");
> lprint_command(cmd->cmnd, m);
> }
>
> @@ -765,13 +763,13 @@ static void lprint_command(unsigned char *command,
> struct seq_file *m)
> int i, s;
> lprint_opcode(command[0], m);
> for (i = 1, s = COMMAND_SIZE(command[0]); i < s; ++i)
> - SPRINTF("%02x ", command[i]);
> - SPRINTF("\n");
> + seq_printf(m, "%02x ", command[i]);
> + seq_printf(m, "\n");
> }
>
> static void lprint_opcode(int opcode, struct seq_file *m)
> {
> - SPRINTF("%2d (0x%02x)", opcode, opcode);
> + seq_printf(m, "%2d (0x%02x)", opcode, opcode);
> }
>
>
> diff --git a/drivers/scsi/aha152x.c b/drivers/scsi/aha152x.c
> index 2b960b3..f14ad8a 100644
> --- a/drivers/scsi/aha152x.c
> +++ b/drivers/scsi/aha152x.c
> @@ -2490,299 +2490,296 @@ static void show_queues(struct Scsi_Host *shpnt)
> disp_enintr(shpnt);
> }
>
> -#undef SPRINTF
> -#define SPRINTF(args...) seq_printf(m, ##args)
> -
> static void get_command(struct seq_file *m, Scsi_Cmnd * ptr)
> {
> int i;
>
> - SPRINTF("%p: target=%d; lun=%d; cmnd=( ",
> + seq_printf(m, "%p: target=%d; lun=%d; cmnd=( ",
> ptr, ptr->device->id, (u8)ptr->device->lun);
>
> for (i = 0; i < COMMAND_SIZE(ptr->cmnd[0]); i++)
> - SPRINTF("0x%02x ", ptr->cmnd[i]);
> + seq_printf(m, "0x%02x ", ptr->cmnd[i]);
>
> - SPRINTF("); resid=%d; residual=%d; buffers=%d; phase |",
> + seq_printf(m, "); resid=%d; residual=%d; buffers=%d; phase |",
> scsi_get_resid(ptr), ptr->SCp.this_residual,
> ptr->SCp.buffers_residual);
>
> if (ptr->SCp.phase & not_issued)
> - SPRINTF("not issued|");
> + seq_printf(m, "not issued|");
> if (ptr->SCp.phase & selecting)
> - SPRINTF("selecting|");
> + seq_printf(m, "selecting|");
> if (ptr->SCp.phase & disconnected)
> - SPRINTF("disconnected|");
> + seq_printf(m, "disconnected|");
> if (ptr->SCp.phase & aborted)
> - SPRINTF("aborted|");
> + seq_printf(m, "aborted|");
> if (ptr->SCp.phase & identified)
> - SPRINTF("identified|");
> + seq_printf(m, "identified|");
> if (ptr->SCp.phase & completed)
> - SPRINTF("completed|");
> + seq_printf(m, "completed|");
> if (ptr->SCp.phase & spiordy)
> - SPRINTF("spiordy|");
> + seq_printf(m, "spiordy|");
> if (ptr->SCp.phase & syncneg)
> - SPRINTF("syncneg|");
> - SPRINTF("; next=0x%p\n", SCNEXT(ptr));
> + seq_printf(m, "syncneg|");
> + seq_printf(m, "; next=0x%p\n", SCNEXT(ptr));
> }
>
> static void get_ports(struct seq_file *m, struct Scsi_Host *shpnt)
> {
> int s;
>
> - SPRINTF("\n%s: %s(%s) ", CURRENT_SC ? "on bus" : "waiting",
> states[STATE].name, states[PREVSTATE].name);
> + seq_printf(m, "\n%s: %s(%s) ", CURRENT_SC ? "on bus" : "waiting",
> states[STATE].name, states[PREVSTATE].name);
>
> s = GETPORT(SCSISEQ);
> - SPRINTF("SCSISEQ( ");
> + seq_printf(m, "SCSISEQ( ");
> if (s & TEMODEO)
> - SPRINTF("TARGET MODE ");
> + seq_printf(m, "TARGET MODE ");
> if (s & ENSELO)
> - SPRINTF("SELO ");
> + seq_printf(m, "SELO ");
> if (s & ENSELI)
> - SPRINTF("SELI ");
> + seq_printf(m, "SELI ");
> if (s & ENRESELI)
> - SPRINTF("RESELI ");
> + seq_printf(m, "RESELI ");
> if (s & ENAUTOATNO)
> - SPRINTF("AUTOATNO ");
> + seq_printf(m, "AUTOATNO ");
> if (s & ENAUTOATNI)
> - SPRINTF("AUTOATNI ");
> + seq_printf(m, "AUTOATNI ");
> if (s & ENAUTOATNP)
> - SPRINTF("AUTOATNP ");
> + seq_printf(m, "AUTOATNP ");
> if (s & SCSIRSTO)
> - SPRINTF("SCSIRSTO ");
> - SPRINTF(");");
> + seq_printf(m, "SCSIRSTO ");
> + seq_printf(m, ");");
>
> - SPRINTF(" SCSISIG(");
> + seq_printf(m, " SCSISIG(");
> s = GETPORT(SCSISIG);
> switch (s & P_MASK) {
> case P_DATAO:
> - SPRINTF("DATA OUT");
> + seq_printf(m, "DATA OUT");
> break;
> case P_DATAI:
> - SPRINTF("DATA IN");
> + seq_printf(m, "DATA IN");
> break;
> case P_CMD:
> - SPRINTF("COMMAND");
> + seq_printf(m, "COMMAND");
> break;
> case P_STATUS:
> - SPRINTF("STATUS");
> + seq_printf(m, "STATUS");
> break;
> case P_MSGO:
> - SPRINTF("MESSAGE OUT");
> + seq_printf(m, "MESSAGE OUT");
> break;
> case P_MSGI:
> - SPRINTF("MESSAGE IN");
> + seq_printf(m, "MESSAGE IN");
> break;
> default:
> - SPRINTF("*invalid*");
> + seq_printf(m, "*invalid*");
> break;
> }
>
> - SPRINTF("); ");
> + seq_printf(m, "); ");
>
> - SPRINTF("INTSTAT (%s); ", TESTHI(DMASTAT, INTSTAT) ? "hi" : "lo");
> + seq_printf(m, "INTSTAT (%s); ", TESTHI(DMASTAT, INTSTAT) ? "hi" : "lo");
>
> - SPRINTF("SSTAT( ");
> + seq_printf(m, "SSTAT( ");
> s = GETPORT(SSTAT0);
> if (s & TARGET)
> - SPRINTF("TARGET ");
> + seq_printf(m, "TARGET ");
> if (s & SELDO)
> - SPRINTF("SELDO ");
> + seq_printf(m, "SELDO ");
> if (s & SELDI)
> - SPRINTF("SELDI ");
> + seq_printf(m, "SELDI ");
> if (s & SELINGO)
> - SPRINTF("SELINGO ");
> + seq_printf(m, "SELINGO ");
> if (s & SWRAP)
> - SPRINTF("SWRAP ");
> + seq_printf(m, "SWRAP ");
> if (s & SDONE)
> - SPRINTF("SDONE ");
> + seq_printf(m, "SDONE ");
> if (s & SPIORDY)
> - SPRINTF("SPIORDY ");
> + seq_printf(m, "SPIORDY ");
> if (s & DMADONE)
> - SPRINTF("DMADONE ");
> + seq_printf(m, "DMADONE ");
>
> s = GETPORT(SSTAT1);
> if (s & SELTO)
> - SPRINTF("SELTO ");
> + seq_printf(m, "SELTO ");
> if (s & ATNTARG)
> - SPRINTF("ATNTARG ");
> + seq_printf(m, "ATNTARG ");
> if (s & SCSIRSTI)
> - SPRINTF("SCSIRSTI ");
> + seq_printf(m, "SCSIRSTI ");
> if (s & PHASEMIS)
> - SPRINTF("PHASEMIS ");
> + seq_printf(m, "PHASEMIS ");
> if (s & BUSFREE)
> - SPRINTF("BUSFREE ");
> + seq_printf(m, "BUSFREE ");
> if (s & SCSIPERR)
> - SPRINTF("SCSIPERR ");
> + seq_printf(m, "SCSIPERR ");
> if (s & PHASECHG)
> - SPRINTF("PHASECHG ");
> + seq_printf(m, "PHASECHG ");
> if (s & REQINIT)
> - SPRINTF("REQINIT ");
> - SPRINTF("); ");
> + seq_printf(m, "REQINIT ");
> + seq_printf(m, "); ");
>
>
> - SPRINTF("SSTAT( ");
> + seq_printf(m, "SSTAT( ");
>
> s = GETPORT(SSTAT0) & GETPORT(SIMODE0);
>
> if (s & TARGET)
> - SPRINTF("TARGET ");
> + seq_printf(m, "TARGET ");
> if (s & SELDO)
> - SPRINTF("SELDO ");
> + seq_printf(m, "SELDO ");
> if (s & SELDI)
> - SPRINTF("SELDI ");
> + seq_printf(m, "SELDI ");
> if (s & SELINGO)
> - SPRINTF("SELINGO ");
> + seq_printf(m, "SELINGO ");
> if (s & SWRAP)
> - SPRINTF("SWRAP ");
> + seq_printf(m, "SWRAP ");
> if (s & SDONE)
> - SPRINTF("SDONE ");
> + seq_printf(m, "SDONE ");
> if (s & SPIORDY)
> - SPRINTF("SPIORDY ");
> + seq_printf(m, "SPIORDY ");
> if (s & DMADONE)
> - SPRINTF("DMADONE ");
> + seq_printf(m, "DMADONE ");
>
> s = GETPORT(SSTAT1) & GETPORT(SIMODE1);
>
> if (s & SELTO)
> - SPRINTF("SELTO ");
> + seq_printf(m, "SELTO ");
> if (s & ATNTARG)
> - SPRINTF("ATNTARG ");
> + seq_printf(m, "ATNTARG ");
> if (s & SCSIRSTI)
> - SPRINTF("SCSIRSTI ");
> + seq_printf(m, "SCSIRSTI ");
> if (s & PHASEMIS)
> - SPRINTF("PHASEMIS ");
> + seq_printf(m, "PHASEMIS ");
> if (s & BUSFREE)
> - SPRINTF("BUSFREE ");
> + seq_printf(m, "BUSFREE ");
> if (s & SCSIPERR)
> - SPRINTF("SCSIPERR ");
> + seq_printf(m, "SCSIPERR ");
> if (s & PHASECHG)
> - SPRINTF("PHASECHG ");
> + seq_printf(m, "PHASECHG ");
> if (s & REQINIT)
> - SPRINTF("REQINIT ");
> - SPRINTF("); ");
> + seq_printf(m, "REQINIT ");
> + seq_printf(m, "); ");
>
> - SPRINTF("SXFRCTL0( ");
> + seq_printf(m, "SXFRCTL0( ");
>
> s = GETPORT(SXFRCTL0);
> if (s & SCSIEN)
> - SPRINTF("SCSIEN ");
> + seq_printf(m, "SCSIEN ");
> if (s & DMAEN)
> - SPRINTF("DMAEN ");
> + seq_printf(m, "DMAEN ");
> if (s & CH1)
> - SPRINTF("CH1 ");
> + seq_printf(m, "CH1 ");
> if (s & CLRSTCNT)
> - SPRINTF("CLRSTCNT ");
> + seq_printf(m, "CLRSTCNT ");
> if (s & SPIOEN)
> - SPRINTF("SPIOEN ");
> + seq_printf(m, "SPIOEN ");
> if (s & CLRCH1)
> - SPRINTF("CLRCH1 ");
> - SPRINTF("); ");
> + seq_printf(m, "CLRCH1 ");
> + seq_printf(m, "); ");
>
> - SPRINTF("SIGNAL( ");
> + seq_printf(m, "SIGNAL( ");
>
> s = GETPORT(SCSISIG);
> if (s & SIG_ATNI)
> - SPRINTF("ATNI ");
> + seq_printf(m, "ATNI ");
> if (s & SIG_SELI)
> - SPRINTF("SELI ");
> + seq_printf(m, "SELI ");
> if (s & SIG_BSYI)
> - SPRINTF("BSYI ");
> + seq_printf(m, "BSYI ");
> if (s & SIG_REQI)
> - SPRINTF("REQI ");
> + seq_printf(m, "REQI ");
> if (s & SIG_ACKI)
> - SPRINTF("ACKI ");
> - SPRINTF("); ");
> + seq_printf(m, "ACKI ");
> + seq_printf(m, "); ");
>
> - SPRINTF("SELID(%02x), ", GETPORT(SELID));
> + seq_printf(m, "SELID(%02x), ", GETPORT(SELID));
>
> - SPRINTF("STCNT(%d), ", GETSTCNT());
> + seq_printf(m, "STCNT(%d), ", GETSTCNT());
>
> - SPRINTF("SSTAT2( ");
> + seq_printf(m, "SSTAT2( ");
>
> s = GETPORT(SSTAT2);
> if (s & SOFFSET)
> - SPRINTF("SOFFSET ");
> + seq_printf(m, "SOFFSET ");
> if (s & SEMPTY)
> - SPRINTF("SEMPTY ");
> + seq_printf(m, "SEMPTY ");
> if (s & SFULL)
> - SPRINTF("SFULL ");
> - SPRINTF("); SFCNT (%d); ", s & (SFULL | SFCNT));
> + seq_printf(m, "SFULL ");
> + seq_printf(m, "); SFCNT (%d); ", s & (SFULL | SFCNT));
>
> s = GETPORT(SSTAT3);
> - SPRINTF("SCSICNT (%d), OFFCNT(%d), ", (s & 0xf0) >> 4, s & 0x0f);
> + seq_printf(m, "SCSICNT (%d), OFFCNT(%d), ", (s & 0xf0) >> 4, s & 0x0f);
>
> - SPRINTF("SSTAT4( ");
> + seq_printf(m, "SSTAT4( ");
> s = GETPORT(SSTAT4);
> if (s & SYNCERR)
> - SPRINTF("SYNCERR ");
> + seq_printf(m, "SYNCERR ");
> if (s & FWERR)
> - SPRINTF("FWERR ");
> + seq_printf(m, "FWERR ");
> if (s & FRERR)
> - SPRINTF("FRERR ");
> - SPRINTF("); ");
> + seq_printf(m, "FRERR ");
> + seq_printf(m, "); ");
>
> - SPRINTF("DMACNTRL0( ");
> + seq_printf(m, "DMACNTRL0( ");
> s = GETPORT(DMACNTRL0);
> - SPRINTF("%s ", s & _8BIT ? "8BIT" : "16BIT");
> - SPRINTF("%s ", s & DMA ? "DMA" : "PIO");
> - SPRINTF("%s ", s & WRITE_READ ? "WRITE" : "READ");
> + seq_printf(m, "%s ", s & _8BIT ? "8BIT" : "16BIT");
> + seq_printf(m, "%s ", s & DMA ? "DMA" : "PIO");
> + seq_printf(m, "%s ", s & WRITE_READ ? "WRITE" : "READ");
> if (s & ENDMA)
> - SPRINTF("ENDMA ");
> + seq_printf(m, "ENDMA ");
> if (s & INTEN)
> - SPRINTF("INTEN ");
> + seq_printf(m, "INTEN ");
> if (s & RSTFIFO)
> - SPRINTF("RSTFIFO ");
> + seq_printf(m, "RSTFIFO ");
> if (s & SWINT)
> - SPRINTF("SWINT ");
> - SPRINTF("); ");
> + seq_printf(m, "SWINT ");
> + seq_printf(m, "); ");
>
> - SPRINTF("DMASTAT( ");
> + seq_printf(m, "DMASTAT( ");
> s = GETPORT(DMASTAT);
> if (s & ATDONE)
> - SPRINTF("ATDONE ");
> + seq_printf(m, "ATDONE ");
> if (s & WORDRDY)
> - SPRINTF("WORDRDY ");
> + seq_printf(m, "WORDRDY ");
> if (s & DFIFOFULL)
> - SPRINTF("DFIFOFULL ");
> + seq_printf(m, "DFIFOFULL ");
> if (s & DFIFOEMP)
> - SPRINTF("DFIFOEMP ");
> - SPRINTF(")\n");
> + seq_printf(m, "DFIFOEMP ");
> + seq_printf(m, ")\n");
>
> - SPRINTF("enabled interrupts( ");
> + seq_printf(m, "enabled interrupts( ");
>
> s = GETPORT(SIMODE0);
> if (s & ENSELDO)
> - SPRINTF("ENSELDO ");
> + seq_printf(m, "ENSELDO ");
> if (s & ENSELDI)
> - SPRINTF("ENSELDI ");
> + seq_printf(m, "ENSELDI ");
> if (s & ENSELINGO)
> - SPRINTF("ENSELINGO ");
> + seq_printf(m, "ENSELINGO ");
> if (s & ENSWRAP)
> - SPRINTF("ENSWRAP ");
> + seq_printf(m, "ENSWRAP ");
> if (s & ENSDONE)
> - SPRINTF("ENSDONE ");
> + seq_printf(m, "ENSDONE ");
> if (s & ENSPIORDY)
> - SPRINTF("ENSPIORDY ");
> + seq_printf(m, "ENSPIORDY ");
> if (s & ENDMADONE)
> - SPRINTF("ENDMADONE ");
> + seq_printf(m, "ENDMADONE ");
>
> s = GETPORT(SIMODE1);
> if (s & ENSELTIMO)
> - SPRINTF("ENSELTIMO ");
> + seq_printf(m, "ENSELTIMO ");
> if (s & ENATNTARG)
> - SPRINTF("ENATNTARG ");
> + seq_printf(m, "ENATNTARG ");
> if (s & ENPHASEMIS)
> - SPRINTF("ENPHASEMIS ");
> + seq_printf(m, "ENPHASEMIS ");
> if (s & ENBUSFREE)
> - SPRINTF("ENBUSFREE ");
> + seq_printf(m, "ENBUSFREE ");
> if (s & ENSCSIPERR)
> - SPRINTF("ENSCSIPERR ");
> + seq_printf(m, "ENSCSIPERR ");
> if (s & ENPHASECHG)
> - SPRINTF("ENPHASECHG ");
> + seq_printf(m, "ENPHASECHG ");
> if (s & ENREQINIT)
> - SPRINTF("ENREQINIT ");
> - SPRINTF(")\n");
> + seq_printf(m, "ENREQINIT ");
> + seq_printf(m, ")\n");
> }
>
> static int aha152x_set_info(struct Scsi_Host *shpnt, char *buffer, int
> length)
> @@ -2825,56 +2822,56 @@ static int aha152x_show_info(struct seq_file *m,
> struct Scsi_Host *shpnt)
> Scsi_Cmnd *ptr;
> unsigned long flags;
>
> - SPRINTF(AHA152X_REVID "\n");
> + seq_printf(m, AHA152X_REVID "\n");
>
> - SPRINTF("ioports 0x%04lx to 0x%04lx\n",
> + seq_printf(m, "ioports 0x%04lx to 0x%04lx\n",
> shpnt->io_port, shpnt->io_port + shpnt->n_io_port - 1);
> - SPRINTF("interrupt 0x%02x\n", shpnt->irq);
> - SPRINTF("disconnection/reconnection %s\n",
> + seq_printf(m, "interrupt 0x%02x\n", shpnt->irq);
> + seq_printf(m, "disconnection/reconnection %s\n",
> RECONNECT ? "enabled" : "disabled");
> - SPRINTF("parity checking %s\n",
> + seq_printf(m, "parity checking %s\n",
> PARITY ? "enabled" : "disabled");
> - SPRINTF("synchronous transfers %s\n",
> + seq_printf(m, "synchronous transfers %s\n",
> SYNCHRONOUS ? "enabled" : "disabled");
> - SPRINTF("%d commands currently queued\n", HOSTDATA(shpnt)->commands);
> + seq_printf(m, "%d commands currently queued\n",
> HOSTDATA(shpnt)->commands);
>
> if(SYNCHRONOUS) {
> - SPRINTF("synchronously operating targets (tick=50 ns):\n");
> + seq_printf(m, "synchronously operating targets (tick=50
> ns):\n");
> for (i = 0; i < 8; i++)
> if (HOSTDATA(shpnt)->syncrate[i] & 0x7f)
> - SPRINTF("target %d: period %dT/%dns; req/ack
> offset %d\n",
> + seq_printf(m, "target %d: period %dT/%dns;
> req/ack offset %d\n",
> i,
> (((HOSTDATA(shpnt)->syncrate[i] & 0x70)
> >> 4) + 2),
> (((HOSTDATA(shpnt)->syncrate[i] & 0x70)
> >> 4) + 2) * 50,
> HOSTDATA(shpnt)->syncrate[i] & 0x0f);
> }
> - SPRINTF("\nqueue status:\n");
> + seq_printf(m, "\nqueue status:\n");
> DO_LOCK(flags);
> if (ISSUE_SC) {
> - SPRINTF("not yet issued commands:\n");
> + seq_printf(m, "not yet issued commands:\n");
> for (ptr = ISSUE_SC; ptr; ptr = SCNEXT(ptr))
> get_command(m, ptr);
> } else
> - SPRINTF("no not yet issued commands\n");
> + seq_printf(m, "no not yet issued commands\n");
> DO_UNLOCK(flags);
>
> if (CURRENT_SC) {
> - SPRINTF("current command:\n");
> + seq_printf(m, "current command:\n");
> get_command(m, CURRENT_SC);
> } else
> - SPRINTF("no current command\n");
> + seq_printf(m, "no current command\n");
>
> if (DISCONNECTED_SC) {
> - SPRINTF("disconnected commands:\n");
> + seq_printf(m, "disconnected commands:\n");
> for (ptr = DISCONNECTED_SC; ptr; ptr = SCNEXT(ptr))
> get_command(m, ptr);
> } else
> - SPRINTF("no disconnected commands\n");
> + seq_printf(m, "no disconnected commands\n");
>
> get_ports(m, shpnt);
>
> #if defined(AHA152X_STAT)
> - SPRINTF("statistics:\n"
> + seq_printf(m, "statistics:\n"
> "total commands: %d\n"
> "disconnections: %d\n"
> "busfree with check condition: %d\n"
> @@ -2894,7 +2891,7 @@ static int aha152x_show_info(struct seq_file *m, struct
> Scsi_Host *shpnt)
> HOSTDATA(shpnt)->busfree_without_done_command,
> HOSTDATA(shpnt)->busfree_without_any_action);
> for(i=0; i<maxstate; i++) {
> - SPRINTF("%-10s %-12d %-12d %-12ld\n",
> + seq_printf(m, "%-10s %-12d %-12d %-12ld\n",
> states[i].name,
> HOSTDATA(shpnt)->count_trans[i],
> HOSTDATA(shpnt)->count[i],
> diff --git a/drivers/scsi/dc395x.c b/drivers/scsi/dc395x.c
> index 0c6be0a..0a1ed50 100644
> --- a/drivers/scsi/dc395x.c
> +++ b/drivers/scsi/dc395x.c
> @@ -4610,13 +4610,10 @@ static void adapter_uninit(struct AdapterCtlBlk *acb)
> }
>
>
> -#undef SPRINTF
> -#define SPRINTF(args...) seq_printf(m,##args)
> -
> #undef YESNO
> #define YESNO(YN) \
> - if (YN) SPRINTF(" Yes ");\
> - else SPRINTF(" No ")
> + if (YN) seq_printf(m, " Yes ");\
> + else seq_printf(m, " No ")
>
> static int dc395x_show_info(struct seq_file *m, struct Scsi_Host *host)
> {
> @@ -4626,47 +4623,44 @@ static int dc395x_show_info(struct seq_file *m,
> struct Scsi_Host *host)
> unsigned long flags;
> int dev;
>
> - SPRINTF(DC395X_BANNER " PCI SCSI Host Adapter\n");
> - SPRINTF(" Driver Version " DC395X_VERSION "\n");
> + seq_printf(m, DC395X_BANNER " PCI SCSI Host Adapter\n");
> + seq_printf(m, " Driver Version " DC395X_VERSION "\n");
>
> DC395x_LOCK_IO(acb->scsi_host, flags);
>
> - SPRINTF("SCSI Host Nr %i, ", host->host_no);
> - SPRINTF("DC395U/UW/F DC315/U %s\n",
> + seq_printf(m, "SCSI Host Nr %i, ", host->host_no);
> + seq_printf(m, "DC395U/UW/F DC315/U %s\n",
> (acb->config & HCC_WIDE_CARD) ? "Wide" : "");
> - SPRINTF("io_port_base 0x%04lx, ", acb->io_port_base);
> - SPRINTF("irq_level 0x%04x, ", acb->irq_level);
> - SPRINTF(" SelTimeout %ims\n", (1638 * acb->sel_timeout) / 1000);
> + seq_printf(m, "io_port_base 0x%04lx, ", acb->io_port_base);
> + seq_printf(m, "irq_level 0x%04x, ", acb->irq_level);
> + seq_printf(m, " SelTimeout %ims\n", (1638 * acb->sel_timeout) / 1000);
>
> - SPRINTF("MaxID %i, MaxLUN %llu, ", host->max_id, host->max_lun);
> - SPRINTF("AdapterID %i\n", host->this_id);
> + seq_printf(m, "MaxID %i, MaxLUN %llu, ", host->max_id, host->max_lun);
> + seq_printf(m, "AdapterID %i\n", host->this_id);
>
> - SPRINTF("tag_max_num %i", acb->tag_max_num);
> - /*SPRINTF(", DMA_Status %i\n", DC395x_read8(acb,
> TRM_S1040_DMA_STATUS)); */
> - SPRINTF(", FilterCfg 0x%02x",
> + seq_printf(m, "tag_max_num %i", acb->tag_max_num);
> + /*seq_printf(m, ", DMA_Status %i\n", DC395x_read8(acb,
> TRM_S1040_DMA_STATUS)); */
> + seq_printf(m, ", FilterCfg 0x%02x",
> DC395x_read8(acb, TRM_S1040_SCSI_CONFIG1));
> - SPRINTF(", DelayReset %is\n", acb->eeprom.delay_time);
> - /*SPRINTF("\n"); */
> + seq_printf(m, ", DelayReset %is\n", acb->eeprom.delay_time);
> + /*seq_printf(m, "\n"); */
>
> - SPRINTF("Nr of DCBs: %i\n", list_size(&acb->dcb_list));
> - SPRINTF
> - ("Map of attached LUNs: %02x %02x %02x %02x %02x %02x %02x %02x\n",
> + seq_printf(m, "Nr of DCBs: %i\n", list_size(&acb->dcb_list));
> + seq_printf(m, "Map of attached LUNs: %02x %02x %02x %02x %02x %02x %02x
> %02x\n",
> acb->dcb_map[0], acb->dcb_map[1], acb->dcb_map[2],
> acb->dcb_map[3], acb->dcb_map[4], acb->dcb_map[5],
> acb->dcb_map[6], acb->dcb_map[7]);
> - SPRINTF
> - (" %02x %02x %02x %02x %02x %02x %02x %02x\n",
> + seq_printf(m, " %02x %02x %02x %02x %02x %02x %02x
> %02x\n",
> acb->dcb_map[8], acb->dcb_map[9], acb->dcb_map[10],
> acb->dcb_map[11], acb->dcb_map[12], acb->dcb_map[13],
> acb->dcb_map[14], acb->dcb_map[15]);
>
> - SPRINTF
> - ("Un ID LUN Prty Sync Wide DsCn SndS TagQ nego_period SyncFreq
> SyncOffs MaxCmd\n");
> + seq_printf(m, "Un ID LUN Prty Sync Wide DsCn SndS TagQ nego_period
> SyncFreq SyncOffs MaxCmd\n");
>
> dev = 0;
> list_for_each_entry(dcb, &acb->dcb_list, list) {
> int nego_period;
> - SPRINTF("%02i %02i %02i ", dev, dcb->target_id,
> + seq_printf(m, "%02i %02i %02i ", dev, dcb->target_id,
> dcb->target_lun);
> YESNO(dcb->dev_mode & NTC_DO_PARITY_CHK);
> YESNO(dcb->sync_offset);
> @@ -4676,53 +4670,53 @@ static int dc395x_show_info(struct seq_file *m,
> struct Scsi_Host *host)
> YESNO(dcb->sync_mode & EN_TAG_QUEUEING);
> nego_period = clock_period[dcb->sync_period & 0x07] << 2;
> if (dcb->sync_offset)
> - SPRINTF(" %03i ns ", nego_period);
> + seq_printf(m, " %03i ns ", nego_period);
> else
> - SPRINTF(" (%03i ns)", (dcb->min_nego_period << 2));
> + seq_printf(m, " (%03i ns)", (dcb->min_nego_period <<
> 2));
>
> if (dcb->sync_offset & 0x0f) {
> spd = 1000 / (nego_period);
> spd1 = 1000 % (nego_period);
> spd1 = (spd1 * 10 + nego_period / 2) / (nego_period);
> - SPRINTF(" %2i.%1i M %02i ", spd, spd1,
> + seq_printf(m, " %2i.%1i M %02i ", spd, spd1,
> (dcb->sync_offset & 0x0f));
> } else
> - SPRINTF(" ");
> + seq_printf(m, " ");
>
> /* Add more info ... */
> - SPRINTF(" %02i\n", dcb->max_command);
> + seq_printf(m, " %02i\n", dcb->max_command);
> dev++;
> }
>
> if (timer_pending(&acb->waiting_timer))
> - SPRINTF("Waiting queue timer running\n");
> + seq_printf(m, "Waiting queue timer running\n");
> else
> - SPRINTF("\n");
> + seq_printf(m, "\n");
>
> list_for_each_entry(dcb, &acb->dcb_list, list) {
> struct ScsiReqBlk *srb;
> if (!list_empty(&dcb->srb_waiting_list))
> - SPRINTF("DCB (%02i-%i): Waiting: %i:",
> + seq_printf(m, "DCB (%02i-%i): Waiting: %i:",
> dcb->target_id, dcb->target_lun,
> list_size(&dcb->srb_waiting_list));
> list_for_each_entry(srb, &dcb->srb_waiting_list, list)
> - SPRINTF(" %p", srb->cmd);
> + seq_printf(m, " %p", srb->cmd);
> if (!list_empty(&dcb->srb_going_list))
> - SPRINTF("\nDCB (%02i-%i): Going : %i:",
> + seq_printf(m, "\nDCB (%02i-%i): Going : %i:",
> dcb->target_id, dcb->target_lun,
> list_size(&dcb->srb_going_list));
> list_for_each_entry(srb, &dcb->srb_going_list, list)
> - SPRINTF(" %p", srb->cmd);
> + seq_printf(m, " %p", srb->cmd);
> if (!list_empty(&dcb->srb_waiting_list) ||
> !list_empty(&dcb->srb_going_list))
> - SPRINTF("\n");
> + seq_printf(m, "\n");
> }
>
> if (debug_enabled(DBG_1)) {
> - SPRINTF("DCB list for ACB %p:\n", acb);
> + seq_printf(m, "DCB list for ACB %p:\n", acb);
> list_for_each_entry(dcb, &acb->dcb_list, list) {
> - SPRINTF("%p -> ", dcb);
> + seq_printf(m, "%p -> ", dcb);
> }
> - SPRINTF("END\n");
> + seq_printf(m, "END\n");
> }
>
> DC395x_UNLOCK_IO(acb->scsi_host, flags);
> diff --git a/drivers/scsi/nsp32.c b/drivers/scsi/nsp32.c
> index 90abb03..3e77551 100644
> --- a/drivers/scsi/nsp32.c
> +++ b/drivers/scsi/nsp32.c
> @@ -1441,8 +1441,6 @@ static irqreturn_t do_nsp32_isr(int irq, void *dev_id)
> return IRQ_RETVAL(handled);
> }
>
> -#undef SPRINTF
> -#define SPRINTF(args...) seq_printf(m, ##args)
>
> static int nsp32_show_info(struct seq_file *m, struct Scsi_Host *host)
> {
> @@ -1458,64 +1456,63 @@ static int nsp32_show_info(struct seq_file *m, struct
> Scsi_Host *host)
> data = (nsp32_hw_data *)host->hostdata;
> base = host->io_port;
>
> - SPRINTF("NinjaSCSI-32 status\n\n");
> - SPRINTF("Driver version: %s, $Revision: 1.33 $\n",
> nsp32_release_version);
> - SPRINTF("SCSI host No.: %d\n", hostno);
> - SPRINTF("IRQ: %d\n", host->irq);
> - SPRINTF("IO: 0x%lx-0x%lx\n", host->io_port,
> host->io_port + host->n_io_port - 1);
> - SPRINTF("MMIO(virtual address): 0x%lx-0x%lx\n", host->base, host->base
> + data->MmioLength - 1);
> - SPRINTF("sg_tablesize: %d\n", host->sg_tablesize);
> - SPRINTF("Chip revision: 0x%x\n", (nsp32_read2(base,
> INDEX_REG) >> 8) & 0xff);
> + seq_printf(m, "NinjaSCSI-32 status\n\n");
> + seq_printf(m, "Driver version: %s, $Revision: 1.33 $\n",
> nsp32_release_version);
> + seq_printf(m, "SCSI host No.: %d\n", hostno);
> + seq_printf(m, "IRQ: %d\n", host->irq);
> + seq_printf(m, "IO: 0x%lx-0x%lx\n", host->io_port,
> host->io_port + host->n_io_port - 1);
> + seq_printf(m, "MMIO(virtual address): 0x%lx-0x%lx\n", host->base,
> host->base + data->MmioLength - 1);
> + seq_printf(m, "sg_tablesize: %d\n",
> host->sg_tablesize);
> + seq_printf(m, "Chip revision: 0x%x\n",
> (nsp32_read2(base, INDEX_REG) >> 8) & 0xff);
>
> mode_reg = nsp32_index_read1(base, CHIP_MODE);
> model = data->pci_devid->driver_data;
>
> #ifdef CONFIG_PM
> - SPRINTF("Power Management: %s\n", (mode_reg & OPTF) ?
> "yes" : "no");
> + seq_printf(m, "Power Management: %s\n", (mode_reg & OPTF)
> ? "yes" : "no");
> #endif
> - SPRINTF("OEM: %ld, %s\n", (mode_reg &
> (OEM0|OEM1)), nsp32_model[model]);
> + seq_printf(m, "OEM: %ld, %s\n", (mode_reg &
> (OEM0|OEM1)), nsp32_model[model]);
>
> spin_lock_irqsave(&(data->Lock), flags);
> - SPRINTF("CurrentSC: 0x%p\n\n", data->CurrentSC);
> + seq_printf(m, "CurrentSC: 0x%p\n\n", data->CurrentSC);
> spin_unlock_irqrestore(&(data->Lock), flags);
>
>
> - SPRINTF("SDTR status\n");
> + seq_printf(m, "SDTR status\n");
> for (id = 0; id < ARRAY_SIZE(data->target); id++) {
>
> - SPRINTF("id %d: ", id);
> + seq_printf(m, "id %d: ", id);
>
> if (id == host->this_id) {
> - SPRINTF("----- NinjaSCSI-32 host adapter\n");
> + seq_printf(m, "----- NinjaSCSI-32 host adapter\n");
> continue;
> }
>
> if (data->target[id].sync_flag == SDTR_DONE) {
> if (data->target[id].period == 0 &&
> data->target[id].offset == ASYNC_OFFSET ) {
> - SPRINTF("async");
> + seq_printf(m, "async");
> } else {
> - SPRINTF(" sync");
> + seq_printf(m, " sync");
> }
> } else {
> - SPRINTF(" none");
> + seq_printf(m, " none");
> }
>
> if (data->target[id].period != 0) {
>
> speed = 1000000 / (data->target[id].period * 4);
>
> - SPRINTF(" transfer %d.%dMB/s, offset %d",
> + seq_printf(m, " transfer %d.%dMB/s, offset %d",
> speed / 1000,
> speed % 1000,
> data->target[id].offset
> );
> }
> - SPRINTF("\n");
> + seq_printf(m, "\n");
> }
> return 0;
> }
> -#undef SPRINTF
>
>
>
> diff --git a/drivers/scsi/pcmcia/nsp_cs.c b/drivers/scsi/pcmcia/nsp_cs.c
> index 34aad32..83db942 100644
> --- a/drivers/scsi/pcmcia/nsp_cs.c
> +++ b/drivers/scsi/pcmcia/nsp_cs.c
> @@ -1364,9 +1364,6 @@ static const char *nsp_info(struct Scsi_Host *shpnt)
> return data->nspinfo;
> }
>
> -#undef SPRINTF
> -#define SPRINTF(args...) seq_printf(m, ##args)
> -
> static int nsp_show_info(struct seq_file *m, struct Scsi_Host *host)
> {
> int id;
> @@ -1378,75 +1375,74 @@ static int nsp_show_info(struct seq_file *m, struct
> Scsi_Host *host)
> hostno = host->host_no;
> data = (nsp_hw_data *)host->hostdata;
>
> - SPRINTF("NinjaSCSI status\n\n");
> - SPRINTF("Driver version: $Revision: 1.23 $\n");
> - SPRINTF("SCSI host No.: %d\n", hostno);
> - SPRINTF("IRQ: %d\n", host->irq);
> - SPRINTF("IO: 0x%lx-0x%lx\n", host->io_port,
> host->io_port + host->n_io_port - 1);
> - SPRINTF("MMIO(virtual address): 0x%lx-0x%lx\n", host->base, host->base
> + data->MmioLength - 1);
> - SPRINTF("sg_tablesize: %d\n", host->sg_tablesize);
> + seq_printf(m, "NinjaSCSI status\n\n");
> + seq_printf(m, "Driver version: $Revision: 1.23 $\n");
> + seq_printf(m, "SCSI host No.: %d\n", hostno);
> + seq_printf(m, "IRQ: %d\n", host->irq);
> + seq_printf(m, "IO: 0x%lx-0x%lx\n", host->io_port,
> host->io_port + host->n_io_port - 1);
> + seq_printf(m, "MMIO(virtual address): 0x%lx-0x%lx\n", host->base,
> host->base + data->MmioLength - 1);
> + seq_printf(m, "sg_tablesize: %d\n",
> host->sg_tablesize);
>
> - SPRINTF("burst transfer mode: ");
> + seq_printf(m, "burst transfer mode: ");
> switch (nsp_burst_mode) {
> case BURST_IO8:
> - SPRINTF("io8");
> + seq_printf(m, "io8");
> break;
> case BURST_IO32:
> - SPRINTF("io32");
> + seq_printf(m, "io32");
> break;
> case BURST_MEM32:
> - SPRINTF("mem32");
> + seq_printf(m, "mem32");
> break;
> default:
> - SPRINTF("???");
> + seq_printf(m, "???");
> break;
> }
> - SPRINTF("\n");
> + seq_printf(m, "\n");
>
>
> spin_lock_irqsave(&(data->Lock), flags);
> - SPRINTF("CurrentSC: 0x%p\n\n", data->CurrentSC);
> + seq_printf(m, "CurrentSC: 0x%p\n\n", data->CurrentSC);
> spin_unlock_irqrestore(&(data->Lock), flags);
>
> - SPRINTF("SDTR status\n");
> + seq_printf(m, "SDTR status\n");
> for(id = 0; id < ARRAY_SIZE(data->Sync); id++) {
>
> - SPRINTF("id %d: ", id);
> + seq_printf(m, "id %d: ", id);
>
> if (id == host->this_id) {
> - SPRINTF("----- NinjaSCSI-3 host adapter\n");
> + seq_printf(m, "----- NinjaSCSI-3 host adapter\n");
> continue;
> }
>
> switch(data->Sync[id].SyncNegotiation) {
> case SYNC_OK:
> - SPRINTF(" sync");
> + seq_printf(m, " sync");
> break;
> case SYNC_NG:
> - SPRINTF("async");
> + seq_printf(m, "async");
> break;
> case SYNC_NOT_YET:
> - SPRINTF(" none");
> + seq_printf(m, " none");
> break;
> default:
> - SPRINTF("?????");
> + seq_printf(m, "?????");
> break;
> }
>
> if (data->Sync[id].SyncPeriod != 0) {
> speed = 1000000 / (data->Sync[id].SyncPeriod * 4);
>
> - SPRINTF(" transfer %d.%dMB/s, offset %d",
> + seq_printf(m, " transfer %d.%dMB/s, offset %d",
> speed / 1000,
> speed % 1000,
> data->Sync[id].SyncOffset
> );
> }
> - SPRINTF("\n");
> + seq_printf(m, "\n");
> }
> return 0;
> }
> -#undef SPRINTF
>
> /*---------------------------------------------------------------*/
> /* error handler */
> diff --git a/drivers/scsi/wd7000.c b/drivers/scsi/wd7000.c
> index f94d736..2d7c62f 100644
> --- a/drivers/scsi/wd7000.c
> +++ b/drivers/scsi/wd7000.c
> @@ -1295,9 +1295,6 @@ static void wd7000_revision(Adapter * host)
> }
>
>
> -#undef SPRINTF
> -#define SPRINTF(args...) { seq_printf(m, ## args); }
> -
> static int wd7000_set_info(struct Scsi_Host *host, char *buffer, int length)
> {
> dprintk("Buffer = <%.*s>, length = %d\n", length, buffer, length);
> @@ -1320,43 +1317,43 @@ static int wd7000_show_info(struct seq_file *m,
> struct Scsi_Host *host)
> #endif
>
> spin_lock_irqsave(host->host_lock, flags);
> - SPRINTF("Host scsi%d: Western Digital WD-7000 (rev %d.%d)\n",
> host->host_no, adapter->rev1, adapter->rev2);
> - SPRINTF(" IO base: 0x%x\n", adapter->iobase);
> - SPRINTF(" IRQ: %d\n", adapter->irq);
> - SPRINTF(" DMA channel: %d\n", adapter->dma);
> - SPRINTF(" Interrupts: %d\n", adapter->int_counter);
> - SPRINTF(" BUS_ON time: %d nanoseconds\n", adapter->bus_on * 125);
> - SPRINTF(" BUS_OFF time: %d nanoseconds\n", adapter->bus_off * 125);
> + seq_printf(m, "Host scsi%d: Western Digital WD-7000 (rev %d.%d)\n",
> host->host_no, adapter->rev1, adapter->rev2);
> + seq_printf(m, " IO base: 0x%x\n", adapter->iobase);
> + seq_printf(m, " IRQ: %d\n", adapter->irq);
> + seq_printf(m, " DMA channel: %d\n", adapter->dma);
> + seq_printf(m, " Interrupts: %d\n", adapter->int_counter);
> + seq_printf(m, " BUS_ON time: %d nanoseconds\n", adapter->bus_on *
> 125);
> + seq_printf(m, " BUS_OFF time: %d nanoseconds\n", adapter->bus_off *
> 125);
>
> #ifdef WD7000_DEBUG
> ogmbs = adapter->mb.ogmb;
> icmbs = adapter->mb.icmb;
>
> - SPRINTF("\nControl port value: 0x%x\n", adapter->control);
> - SPRINTF("Incoming mailbox:\n");
> - SPRINTF(" size: %d\n", ICMB_CNT);
> - SPRINTF(" queued messages: ");
> + seq_printf(m, "\nControl port value: 0x%x\n", adapter->control);
> + seq_printf(m, "Incoming mailbox:\n");
> + seq_printf(m, " size: %d\n", ICMB_CNT);
> + seq_printf(m, " queued messages: ");
>
> for (i = count = 0; i < ICMB_CNT; i++)
> if (icmbs[i].status) {
> count++;
> - SPRINTF("0x%x ", i);
> + seq_printf(m, "0x%x ", i);
> }
>
> - SPRINTF(count ? "\n" : "none\n");
> + seq_printf(m, count ? "\n" : "none\n");
>
> - SPRINTF("Outgoing mailbox:\n");
> - SPRINTF(" size: %d\n", OGMB_CNT);
> - SPRINTF(" next message: 0x%x\n", adapter->next_ogmb);
> - SPRINTF(" queued messages: ");
> + seq_printf(m, "Outgoing mailbox:\n");
> + seq_printf(m, " size: %d\n", OGMB_CNT);
> + seq_printf(m, " next message: 0x%x\n", adapter->next_ogmb);
> + seq_printf(m, " queued messages: ");
>
> for (i = count = 0; i < OGMB_CNT; i++)
> if (ogmbs[i].status) {
> count++;
> - SPRINTF("0x%x ", i);
> + seq_printf(m, "0x%x ", i);
> }
>
> - SPRINTF(count ? "\n" : "none\n");
> + seq_printf(m, count ? "\n" : "none\n");
> #endif
>
> spin_unlock_irqrestore(host->host_lock, flags);
>
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
