When I/O is aborted by mid-layer, fnic FW will complete the I/O before
completing the abort task. In some cases abort request is completed before the
I/O, which could lead to inconsistent driver and firmware states. In this case
firmware reset would clear the inconsistent state
Signed-off-by: Anil Chintalapati <achin...@cisco.com>
Signed-off-by: Sesidhar Baddela <sebad...@cisco.com>
Signed-off-by: Hiral Shah <his...@cisco.com>
---
drivers/scsi/fnic/fnic.h | 2 +-
drivers/scsi/fnic/fnic_scsi.c | 15 +++++++++++++++
2 files changed, 16 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/fnic/fnic.h b/drivers/scsi/fnic/fnic.h index
bf8d34c..26270c3 100644
--- a/drivers/scsi/fnic/fnic.h
+++ b/drivers/scsi/fnic/fnic.h
@@ -39,7 +39,7 @@
#define DRV_NAME "fnic"
#define DRV_DESCRIPTION "Cisco FCoE HBA Driver"
-#define DRV_VERSION "1.6.0.11"
+#define DRV_VERSION "1.6.0.17"
#define PFX DRV_NAME ": "
#define DFX DRV_NAME "%d: "
diff --git a/drivers/scsi/fnic/fnic_scsi.c b/drivers/scsi/fnic/fnic_scsi.c
index 961bdf5..9ebc933 100644
--- a/drivers/scsi/fnic/fnic_scsi.c
+++ b/drivers/scsi/fnic/fnic_scsi.c
@@ -1873,6 +1873,21 @@ int fnic_abort_cmd(struct scsi_cmnd *sc)
goto fnic_abort_cmd_end;
}
+ /* IO out of order */
+
+ if (!(CMD_FLAGS(sc) & (FNIC_IO_ABORTED | FNIC_IO_DONE))) {
+ spin_unlock_irqrestore(io_lock, flags);
+ FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+ "Issuing Host reset due to out of order IO\n");
+
+ if (fnic_host_reset(sc) == FAILED) {
+ FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+ "fnic_host_reset failed.\n");
+ }
+ ret = FAILED;
+ goto fnic_abort_cmd_end;
+ }
+
CMD_STATE(sc) = FNIC_IOREQ_ABTS_COMPLETE;
/*
--
1.8.5.4
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
