On 11/09/2014 01:18 PM, Finn Thain wrote:
>
> Ping...
>
> On Fri, 31 Oct 2014, Finn Thain wrote:
>
>>
>> On Thu, 30 Oct 2014, Hannes Reinecke wrote:
>>
>>> On 10/27/2014 06:26 AM, Finn Thain wrote:
>>>> Simplify falcon_release_lock_if_possible() by making callers
>>>> responsible for disabling local IRQ's, which they must do anyway to
>>>> correctly synchronize the ST DMA "lock" with core driver data
>>>> structures. Move this synchronization logic to the core driver with
>>>> which it is tightly coupled.
>>>>
>>>> Other LLD's like sun3_scsi and mac_scsi that can make use of this core
>>>> driver can just stub out the NCR5380_acquire_dma_irq() and
>>>> NCR5380_release_dma_irq() calls so the compiler will eliminate the ST
>>>> DMA code.
>>>>
>>>> Remove a redundant local_irq_save/restore pair (irq's are disabled for
>>>> interrupt handlers these days). Revise the locking for
>>>> atari_scsi_bus_reset(): use local_irq_save/restore() instead of
>>>> atari_turnoff/turnon_irq(). There is no guarantee that atari_scsi
>>>> still holds the ST DMA lock during EH, so atari_turnoff/turnon_irq()
>>>> could end up dropping an IDE or floppy interrupt.
>>>>
>>>> Signed-off-by: Finn Thain <fth...@telegraphics.com.au>
>>>>
>>>> ---
>>>> drivers/scsi/atari_NCR5380.c | 72
>>>> ++++++++++++++++++++++++++-----------------
>>>> drivers/scsi/atari_scsi.c | 47 ++++++++++------------------
>>>> 2 files changed, 62 insertions(+), 57 deletions(-)
>>>>
>>>> Index: linux/drivers/scsi/atari_NCR5380.c
>>>> ===================================================================
>>>> --- linux.orig/drivers/scsi/atari_NCR5380.c 2014-10-27
>>>> 16:25:54.000000000 +1100
>>>> +++ linux/drivers/scsi/atari_NCR5380.c 2014-10-27 16:25:55.000000000
>>>> +1100
>>>> @@ -926,7 +926,7 @@ static int NCR5380_queue_command(struct
>>>> * alter queues and touch the lock.
>>>> */
>>>> /* perhaps stop command timer here */
>>>> - if (!falcon_get_lock())
>>>> + if (!NCR5380_acquire_dma_irq(instance))
>>>> return SCSI_MLQUEUE_HOST_BUSY;
>>>> /* perhaps restart command timer here */
>>>>
>>>> @@ -962,6 +962,18 @@ static int NCR5380_queue_command(struct
>>>> return 0;
>>>> }
>>>>
>>>> +static inline void maybe_release_dma_irq(struct Scsi_Host *instance)
>>>> +{
>>>> + struct NCR5380_hostdata *hostdata = shost_priv(instance);
>>>> +
>>>> + /* Caller does the locking needed to set & test these data atomically */
>>>> + if (!hostdata->disconnected_queue &&
>>>> + !hostdata->issue_queue &&
>>>> + !hostdata->connected &&
>>>> + !hostdata->retain_dma_intr)
>>>> + NCR5380_release_dma_irq(instance);
>>>> +}
>>>> +
>>>> /*
>>>> * Function : NCR5380_main (void)
>>>> *
>>>> @@ -1084,9 +1096,11 @@ static void NCR5380_main(struct work_str
>>>> cmd_get_tag(tmp, tmp->cmnd[0] !=
>>>> REQUEST_SENSE);
>>>> #endif
>>>> if (!NCR5380_select(instance, tmp)) {
>>>> + local_irq_disable();
>>>> hostdata->retain_dma_intr--;
>>>> /* release if target did not
>>>> response! */
>>>> -
>>>> falcon_release_lock_if_possible(hostdata);
>>>> + maybe_release_dma_irq(instance);
>>>> + local_irq_restore(flags);
>>>> break;
>>>> } else {
>>>> local_irq_disable();
>>>> @@ -2085,11 +2099,12 @@ static void NCR5380_information_transfer
>>>> case COMMAND_COMPLETE:
>>>> /* Accept message by clearing ACK */
>>>> NCR5380_write(INITIATOR_COMMAND_REG,
>>>> ICR_BASE);
>>>> - /* ++guenther: possible race with
>>>> Falcon locking */
>>>> - hostdata->retain_dma_intr++;
>>>> - hostdata->connected = NULL;
>>>> dprintk(NDEBUG_QUEUES, "scsi%d: command
>>>> for target %d, lun %llu "
>>>> "completed\n", HOSTNO,
>>>> cmd->device->id, cmd->device->lun);
>>>> +
>>>> + local_irq_save(flags);
>>>> + hostdata->retain_dma_intr++;
>>>> + hostdata->connected = NULL;
>>>> #ifdef SUPPORT_TAGS
>>>> cmd_free_tag(cmd);
>>>> if (status_byte(cmd->SCp.Status) ==
>>>> QUEUE_FULL) {
>>>> @@ -2148,17 +2163,17 @@ static void NCR5380_information_transfer
>>>>
>>>> dprintk(NDEBUG_AUTOSENSE,
>>>> "scsi%d: performing request sense\n", HOSTNO);
>>>>
>>>> - local_irq_save(flags);
>>>> LIST(cmd,hostdata->issue_queue);
>>>> SET_NEXT(cmd,
>>>> hostdata->issue_queue);
>>>> hostdata->issue_queue = (struct
>>>> scsi_cmnd *) cmd;
>>>> - local_irq_restore(flags);
>>>> dprintk(NDEBUG_QUEUES, "scsi%d:
>>>> REQUEST SENSE added to head of "
>>>> "issue queue\n",
>>>> H_NO(cmd));
>>>> } else {
>>>> cmd->scsi_done(cmd);
>>>> }
>>>>
>>>> + local_irq_restore(flags);
>>>> +
>>>> NCR5380_write(SELECT_ENABLE_REG,
>>>> hostdata->id_mask);
>>>> /*
>>>> * Restore phase bits to 0 so an
>>>> interrupted selection,
>>> Probably a stupid question, but you're disabling local interrupts.
>>> scsi_done() OTOH is triggering a soft irq.
>>
>> Isn't that how all bottom halves work?
>>
>>> Does this work?
>>
>> Yes, I've tested that particular code. I'm pretty sure Michael has too.
>>
>> A quick search turned up another example of this in
>> zfcp_fsf_fcp_cmnd_handler().
>>
>>> Shouldn't we enable interrupts before calling scsi_done() ?
>>
>> I don't see anything in the scsi_done() implementation in scsi_lib.c that
>> would be problematic. The description says "This function is interrupt
>> context safe". The same would have to apply to scsi_eh_done().
>>
>>
Ah. I thought I've had it answered, but apparently I ran into one of
our network hickups.
Reviewed-by: Hannes Reinecke <h...@suse.de>
Cheers,
Hannes
--
Dr. Hannes Reinecke zSeries & Storage
h...@suse.de +49 911 74053 688
SUSE LINUX GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: J. Hawn, J. Guild, F. Imendörffer, HRB 21284 (AG Nürnberg)
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
