On Wed, 2014-08-20 at 16:18 -0400, Dale R. Worley wrote: > I don't know if this is the correct place for this problem, but you > people can probably tell me the correct place.
linux-usb can probably also help (cc'd). > I have two "USB to SATA adapter" dongles. In general, they work fine. > However I've discovered that one of them handles large (1 TB and > above) drives correctly and one does not. In particular, when I use > the unsuccessful one, neither fdisk nor gdisk reports the disk size > correctly, and the kernel does not read the partition table. > > More confusingly, both dongles work correctly with large disks on > Windows 7 Professional. > > Both of the following cases are when a 3.0 TB drive is attached. > > The successful device has the "Diablo" brand. The most interesting > messages in the log when I plug in the USB are (the complete message > set is appended below): > > Aug 18 21:56:53 hobgoblin kernel: [ 294.229462] usb 2-1.3: New USB device > found, idVendor=152d, idProduct=2338 > Aug 18 21:56:53 hobgoblin kernel: [ 294.229475] usb 2-1.3: New USB device > strings: Mfr=1, Product=2, SerialNumber=5 > Aug 18 21:56:53 hobgoblin kernel: [ 294.229482] usb 2-1.3: Product: USB to > ATA/ATAPI bridge > Aug 18 21:56:53 hobgoblin kernel: [ 294.229488] usb 2-1.3: Manufacturer: > JMicron > Aug 18 21:56:53 hobgoblin kernel: [ 294.229495] usb 2-1.3: SerialNumber: > 000001D91CC4 > Aug 18 21:56:54 hobgoblin kernel: [ 295.236576] sd 7:0:0:0: [sdb] Very big > device. Trying to use READ CAPACITY(16). > Aug 18 21:56:54 hobgoblin kernel: [ 295.236955] sd 7:0:0:0: [sdb] 5860533168 > 512-byte logical blocks: (3.00 TB/2.72 TiB) > > The unsuccessful device has the "Ez-Connect" brand. The most > interesting messages in the log when I plug in the USB are (the > complete message set is appended below): > > Aug 18 21:54:06 hobgoblin kernel: [ 127.674374] usb 2-2: new high-speed USB > device number 4 using ehci-pci > Aug 18 21:54:06 hobgoblin kernel: [ 127.791128] usb 2-2: New USB device > found, idVendor=05e3, idProduct=0718 > Aug 18 21:54:06 hobgoblin kernel: [ 127.791135] usb 2-2: New USB device > strings: Mfr=0, Product=1, SerialNumber=2 > Aug 18 21:54:06 hobgoblin kernel: [ 127.791138] usb 2-2: Product: USB Storage > Aug 18 21:54:06 hobgoblin kernel: [ 127.791142] usb 2-2: SerialNumber: > 000000000033 > Aug 18 21:54:07 hobgoblin kernel: [ 128.847269] sd 6:0:0:0: [sdb] 1565565872 > 512-byte logical blocks: (801 GB/746 GiB) So the basic problem here seems to be that this adapter has wrapped the INQUIRY response instead of giving us the the conventional response that means my device is too big. This could be because the processing engine on the card doesn't understand 16 byte commands (which are required for addressing capacity > 2TB) or it could just be a firmware SCSI emulator mistake. The best way of telling might be to use the SG_IO interface to send a read capacity 16. sg_readcap --16 should be able to do this. If you get a sensible response, chances are we should just quirk this device to apply RC16 first. If something goes wrong, it's likely unfixably broken for devices > 2TB James > Dale > > ---------------------------------------------------------------------- > For the Diablo adapter: > > Aug 18 21:56:53 hobgoblin kernel: [ 294.153343] usb 2-1.3: new high-speed > USB device number 5 using ehci-pci > Aug 18 21:56:53 hobgoblin kernel: [ 294.229462] usb 2-1.3: New USB device > found, idVendor=152d, idProduct=2338 > Aug 18 21:56:53 hobgoblin kernel: [ 294.229475] usb 2-1.3: New USB device > strings: Mfr=1, Product=2, SerialNumber=5 > Aug 18 21:56:53 hobgoblin kernel: [ 294.229482] usb 2-1.3: Product: USB to > ATA/ATAPI bridge > Aug 18 21:56:53 hobgoblin kernel: [ 294.229488] usb 2-1.3: Manufacturer: > JMicron > Aug 18 21:56:53 hobgoblin kernel: [ 294.229495] usb 2-1.3: SerialNumber: > 000001D91CC4 > Aug 18 21:56:53 hobgoblin kernel: [ 294.231159] usb-storage 2-1.3:1.0: USB > Mass Storage device detected > Aug 18 21:56:53 hobgoblin kernel: [ 294.233951] scsi7 : usb-storage 2-1.3:1.0 > Aug 18 21:56:53 hobgoblin mtp-probe: checking bus 2, device 5: > "/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.3" > Aug 18 21:56:53 hobgoblin mtp-probe: bus: 2, device: 5 was not an MTP device > Aug 18 21:56:54 hobgoblin kernel: [ 295.235735] scsi 7:0:0:0: Direct-Access > WDC WD30 EZRX-00SPEB0 PQ: 0 ANSI: 5 > Aug 18 21:56:54 hobgoblin kernel: [ 295.236209] sd 7:0:0:0: Attached scsi > generic sg2 type 0 > Aug 18 21:56:54 hobgoblin kernel: [ 295.236576] sd 7:0:0:0: [sdb] Very big > device. Trying to use READ CAPACITY(16). > Aug 18 21:56:54 hobgoblin kernel: [ 295.236955] sd 7:0:0:0: [sdb] 5860533168 > 512-byte logical blocks: (3.00 TB/2.72 TiB) > Aug 18 21:56:54 hobgoblin kernel: [ 295.237957] sd 7:0:0:0: [sdb] Write > Protect is off > Aug 18 21:56:54 hobgoblin kernel: [ 295.238957] sd 7:0:0:0: [sdb] No Caching > mode page found > Aug 18 21:56:54 hobgoblin kernel: [ 295.238962] sd 7:0:0:0: [sdb] Assuming > drive cache: write through > Aug 18 21:56:54 hobgoblin kernel: [ 295.239956] sd 7:0:0:0: [sdb] Very big > device. Trying to use READ CAPACITY(16). > Aug 18 21:56:54 hobgoblin kernel: [ 295.242334] sd 7:0:0:0: [sdb] No Caching > mode page found > Aug 18 21:56:54 hobgoblin kernel: [ 295.242339] sd 7:0:0:0: [sdb] Assuming > drive cache: write through > Aug 18 21:56:54 hobgoblin kernel: [ 295.305631] GPT:Primary header thinks > Alt. header is not at the end of the disk. > Aug 18 21:56:54 hobgoblin kernel: [ 295.305638] GPT:1565565871 != 5860533167 > Aug 18 21:56:54 hobgoblin kernel: [ 295.305639] GPT:Alternate GPT header not > at the end of the disk. > Aug 18 21:56:54 hobgoblin kernel: [ 295.305640] GPT:1565565871 != 5860533167 > Aug 18 21:56:54 hobgoblin kernel: [ 295.305642] GPT: Use GNU Parted to > correct GPT errors. > Aug 18 21:56:54 hobgoblin kernel: [ 295.305653] sdb: sdb1 sdb2 sdb3 sdb4 > Aug 18 21:56:54 hobgoblin kernel: [ 295.308235] sd 7:0:0:0: [sdb] Very big > device. Trying to use READ CAPACITY(16). > Aug 18 21:56:54 hobgoblin kernel: [ 295.310974] sd 7:0:0:0: [sdb] No Caching > mode page found > Aug 18 21:56:54 hobgoblin kernel: [ 295.310980] sd 7:0:0:0: [sdb] Assuming > drive cache: write through > Aug 18 21:56:54 hobgoblin kernel: [ 295.310984] sd 7:0:0:0: [sdb] Attached > SCSI disk > ---------------------------------------------------------------------- > For the Ez-Connect adapter: > > Aug 18 21:54:06 hobgoblin kernel: [ 127.674374] usb 2-2: new high-speed USB > device number 4 using ehci-pci > Aug 18 21:54:06 hobgoblin kernel: [ 127.791128] usb 2-2: New USB device > found, idVendor=05e3, idProduct=0718 > Aug 18 21:54:06 hobgoblin kernel: [ 127.791135] usb 2-2: New USB device > strings: Mfr=0, Product=1, SerialNumber=2 > Aug 18 21:54:06 hobgoblin kernel: [ 127.791138] usb 2-2: Product: USB Storage > Aug 18 21:54:06 hobgoblin kernel: [ 127.791142] usb 2-2: SerialNumber: > 000000000033 > Aug 18 21:54:06 hobgoblin mtp-probe: checking bus 2, device 4: > "/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-2" > Aug 18 21:54:06 hobgoblin mtp-probe: bus: 2, device: 4 was not an MTP device > Aug 18 21:54:06 hobgoblin kernel: [ 127.839825] usb-storage 2-2:1.0: USB > Mass Storage device detected > Aug 18 21:54:06 hobgoblin kernel: [ 127.839917] scsi6 : usb-storage 2-2:1.0 > Aug 18 21:54:06 hobgoblin kernel: [ 127.840721] usbcore: registered new > interface driver usb-storage > Aug 18 21:54:07 hobgoblin kernel: [ 128.844942] scsi 6:0:0:0: Direct-Access > WDC WD30 EZRX-00SPEB0 0041 PQ: 0 ANSI: 0 > Aug 18 21:54:07 hobgoblin kernel: [ 128.846146] sd 6:0:0:0: Attached scsi > generic sg2 type 0 > Aug 18 21:54:07 hobgoblin kernel: [ 128.847269] sd 6:0:0:0: [sdb] 1565565872 > 512-byte logical blocks: (801 GB/746 GiB) > Aug 18 21:54:07 hobgoblin kernel: [ 128.848303] sd 6:0:0:0: [sdb] Write > Protect is off > Aug 18 21:54:07 hobgoblin kernel: [ 128.849389] sd 6:0:0:0: [sdb] No Caching > mode page found > Aug 18 21:54:07 hobgoblin kernel: [ 128.849398] sd 6:0:0:0: [sdb] Assuming > drive cache: write through > Aug 18 21:54:07 hobgoblin kernel: [ 128.853028] sd 6:0:0:0: [sdb] No Caching > mode page found > Aug 18 21:54:07 hobgoblin kernel: [ 128.853038] sd 6:0:0:0: [sdb] Assuming > drive cache: write through > Aug 18 21:54:08 hobgoblin kernel: [ 129.638416] sdb: sdb1 sdb2 sdb3 > Aug 18 21:54:08 hobgoblin kernel: [ 129.641877] sd 6:0:0:0: [sdb] No Caching > mode page found > Aug 18 21:54:08 hobgoblin kernel: [ 129.641884] sd 6:0:0:0: [sdb] Assuming > drive cache: write through > Aug 18 21:54:08 hobgoblin kernel: [ 129.641889] sd 6:0:0:0: [sdb] Attached > SCSI disk > ---------------------------------------------------------------------- > -- > To unsubscribe from this list: send the line "unsubscribe linux-scsi" in > the body of a message to majord...@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
